ViewSonic N2750w Users Guide

							E
N
G L I
S
H
TEXT/ MIX/ PICTURE button
In TV Mode:  Press the TEXT/ MIX/ PICTURE button to enter the Teletext mode.
In TELETEXT Mode:  Press the button again to superimpose a Teletext broadcast
onto the screen of current TV program (mixed Mode).
In MIXED Mode:  Press the button again to return to the normal TV screen (current
program).
Teletext function control button
Press the Index button to return to index page.
When you press this button in teletext mode, a CURSOR appears. This cursor
(rectangular box) contains a page number and you can select the desire\
d page
simply by using the four colours.
RED button: Move cursor down.
GREEN button: Move cursor up.
YELLOW button: Change from current page to selected page.
BLUE button: Exit the CURSOR Mode.
Index button
Press this button you force the Teletext to LIST Mode. It means that row 24 (bottom
row of Teletext) will not have transmitting information, only the pages that yo\
u have
previously stored in the memory.
Press LIST button again to exit from LIST Mode to teletext.
List button
Selects double height text under Teletext mode for full screen.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
Size button
ViewSonic     N2750w    10
 
						

							E
N
G
L
I
S
H
Hold button
Press this button to remove the information from the display and stop the automatic
page change will occur if a teletext page consists of 2 or more sub pages.
Continue press this button again. The number of sub pages and the sub page
displayed is, usually, shown on the screen below the time. When this button is
pressed, the stop symbol is displayed at the left-top corner of the screen, and the
automatic changing is inhibited.
Store button
Store current pages in List mode.
Press the LIST button to change from FLOF system to LIST Mode.
Press a coloured button to correspond to the coloured brackets on the screen for
page number storage.
Enter the Teletext page number by using the 0 ~ 9 digit buttons (enter three digits).
Press the STORE button to memorize the page numbers you require.
Subcode button
When a selected Teletext page with hidden subpages or timed pages, these pages can
be seen by the following manner:
1. Press the subcode button. Screen will show « = = = = »
2. Enter 4 digits number button to correspond to the subpage desired. E.g. 0010 for
subpage number 10.
3. Wait until the page appears
ViewSonic     N2750w    11
 
						

							E
N
G L I
S
H
1  Remove the battery cover by pulling then lifting the knob on the cover.
2  Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3  Reattach the battery cover.
1. Insert Remote Control Batteries
CAUTION
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries incor-
rectly may result in cracking or leakage, which may pose a risk of fire or lead to
personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
When the remote control will not to be used for an extended period, remove
the batteries.
Installation
Make sure the power is off before installing N2750w.
Connect the LCD TV to TV antenna terminal or CATV box by 75-ohm coaxial cable.
2. Connecting with the antenna
RF Cable or Adapter
ViewSonic     N2750w    12
 
						

							E
N
G L I
S
H
Connect Video/Audio cables from compatible devices into the back panel of N2750w.
4. Connect AV, S-Video, YPbPr to Video Devices
Connect Video/Audio cables from compatible devices into the back panel of N2750w.
3. Connect Audio Cable
OPTIONAL:
To connect an external amplifier,
connect the L/R RCA cable from
the TV AUDIO OUT port to the
appropriate AUDIO IN port on a
compatible amplifier as shown on
the right.
Stereo system
VCR
AV model:
RCA  A/V Cable
(Cable not supplied) Audio Cable (Cable not supplied)
ViewSonic     N2750w    13
 
						

							E
N
G L I
S
H
S-Video model:
YPbPr model:
DVD Palyer or VCR VCR
Audio in Cable (Cable not supplied)
S-Video Cable
(Cable not supplied)
YPbPr Cable
(Cable not supplied)
Audio in Cable
(Cable not supplied)
ViewSonic     N2750w    14
 
						

							E
N
G L I
S
H
Connect the VGA cable from VGA output of PC to the VGA terminal input of\
 N2750w.
PC up to 1280 x 1024, 1024 x 768 is the preferred resolution.
5. Connect to the PC
VGA (15pin D-Sub):
Connect the Audio In cable (green) from audio output of your PC to the audio input\
terminal (green) of N2750w.
PC Audio in:
PC
VGA 15 Pin Cable
(Cable not supplied)
PC
PC Audio in Cable
(Cable not supplied)
ViewSonic     N2750w    15
 
						

							E
N
G L I
S
H6. Connect power cable
AC wall socket
Connect Earphone from compatible devices into the back panel of N2750w.
Earphone:
Earphone
(Earphone not supplied)
AC Switch
Switch to ON
Connect the power cord to the N2750w then to a properly grounded AC outlet. Turn on
the AC Switch on the back of N2750w
ViewSonic     N2750w    16
 
						

							E
N
G
L
I
S
H
8. Select input source for your LCDTV display, via either OSD menu or
   Remote control
The Enter key of N2750w is the shortcut key for selection of input source to display.
TV key of remote control is shortcut for TV selection.
Press the Power
button on top of the
LCD display. Or press
the Power On (red)
button on the Remote
Control. Turn Video
source power ON.
7. Turn Power ON
ViewSonic     N2750w    17
 
						

							E
N
G L I
S
H
Basic operation
Powering the LCD TV
To adjust the function of your LCD TV, you may use your remote control or those but-
tons onto your LCD TV to set input sources, such as OSD sources, volume adjusting,
and etc.
Before using the LCD TV:
1. Insert the power plug.
2. Connect external equipment properly.
3. Turn on the Main Power Switch. (If the LCD TV will not be used for a long period of
time, please turn it off)
Power On/Off:
To turn the LCD TV on/off :
Press the  POWER button under the LCD TV or press the  POWER button on your
remote control to turn on/off the TV. The power LED indicator lights up when the LCD
TV is working.
Volume Adjust
Press    or     vol-/+ to adjust the volume.
Channel Select
Press number key.
Ex: Your desired number is 8.
    Press  8
Ex: Your desired number is 80.
Press  8      press  0
OSD Functions
ViewSonic     N2750w    18 Favorite Channel Select
Press CH-/+ key or        button to select your favorite channels.
After auto scanning all the available channels, the ordinal of favorite
channel is as following.
If you want to set up the favorite channels, please reference page 20.
 
						

							E
N
G L I
S
H
Info
Freeze
Display the current information,
such as input source, resolution,
vertical frequency, resolution
type, channel, and sound mode.
Press  INFO , and the current state
will be displayed on the screen.
To freeze the main picture.
When the picture stops,
The sound still continues.
Input Source Select
There are Composite, S-Video, RGB,
Component, TV, and SCART sources provided.
Using the OSD Function
You can use the OSD menus and options to adjust various settings by using\
 your re-
mote control.
The basic operation is as following: Press  MENU  to display OSD Menu.
Use        to move the cursor bar up and down, so that you can appoint y\
our desired
optional itemwhile OSD menu is enabled.
Use  ENTER  to get into your desired item.
Press        to adjust the condition.
Press  EXIT to close the recent page.
Use  MENU  again to leave OSD Menu.
ViewSonic     N2750w   19