ViewSonic N4200w Users Guide

 
9 ViewSonic N4200w 
View of the Product 
Front 
 
 
A INPUT Select input sources 
B MENU Turn OSD menu ON/OFF  
C VOL- Decrease volume or adjust a highlighted control decreasingly 
while in OSD menu 
D VOL + Increase volume or adjust a highlighted control increasingly 
while in OSD menu 
E CH  Channel down/ Scroll down 
F CH  Channel up/ Scroll up 
G POWER Turn the power ON/OFF 
 
 

 
ViewSonic N4200w  10 
Back 
 
 
A POWER S/W Power S/W 
B AC IN Using cable provided, connect a power source. 
C HDMI(1)  Have one HDMI cable terminals of your DVD player. 
D HDMI(2) Have one HDMI cable terminals of your DVD player. 
E VGA Connect the VGA cable output of PC to the VGA 
terminal input. 
F PC STEREO Connect the Audio in cable from audio output of your PC 
to the audio input terminal. 
 

 
11  ViewSonic N4200w 
Component 
 
A R Connect Video/Audio cable from compatible devices into the 
side jack. 
B L Connect Video/Audio cable from compatible devices into the 
side jack. 
C VIDEO  Connect the external video device such as VCR, DVD, and 
video game into this jack. 
D S-V1 Connect the external video device such as VCR, DVD, and 
video game into this jack. 
E R Connect Video/Audio cable from compatible devices into the 
side jack. 
F L Connect Video/Audio cable from compatible devices into...

 
ViewSonic N4200w  12 
Remote Control 
 
 
Remote control button function as follow 
A Source button Select Input Source 
B 0~100+ number button No functions 
C Volume  Adjust Volume 
D CC button  Close Caption 
L K
N I 
DQ 
M
O
P 
E 
J 
H
G
F
C
B
R
SA
 

 
13 ViewSonic N4200w 
E UP/DOWN/LEFT/ 
RIGHT/ ENTER button 
UP/DOWN for OSD function select and LEFT/ RIGHT 
for function adjust 
VOL- and VOL+ button=adjust the volume when there 
is no OSD menu display. CH﹀ and CH＾ = change 
the OSD menu display (For certain models) 
F MUTE button Mute On/Off 
G FREEZE When the program information you want to capture, 
press button. Press again, and the picture is released 
H DISPLAY Display the sources and time 
I SLEEP  Set timer to turn off the Display 
J PIP/POP...

 
ViewSonic N4200w  14 
Installation 
1.  Insert Remote Control Batteries 
 
 
1 Remove the battery cover by pulling then lifting the knob on the cover. 
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery 
compartment. 
3 Reattach the battery cover. 
CAUTION 
y Only use the specified AAA batteries. 
y Do not mix new and old batteries. This may result in cracking or leakage, which may 
pose a risk of fire or lead to personal injury. 
y Insert batteries according to (+) and...

 
15 ViewSonic N4200w 
2.   Connect AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices 
Connect Video/Audio cables from compatible devices into the back panel of N4200W. 
AV model: 
 
 
 
S-Video model: 
 
 
 
RCA A/V  Cable 
(Cable not supplied) 
VCR 
S-Video Cable   
(Cable not supplied) 
Audio in Cable   
(Cable not supplied)
VCR 
 

 
ViewSonic N4200w  16 
YCbCr model: 
 
 
 
 
YPbPr model: 
 
 
 
 Audio in Cable   
(Cable not supplied)
DVD Player or VCR YCbCr Cable   
(Cable not supplied) 
Audio in Cable   
(Cable not supplied)
DVD Player or VCR YCbCr Cable   
(Cable not supplied) 
 

 
17 ViewSonic N4200w 
HDMI model: 
Connect the HDMI cable from DVI output of your DVD player to the HDMI terminal input 
of N4200W. 
HDMI cable 
 
Note: To receive the sound from DVD, please turn on Sound Menu of OSD for selecting 
HDMI audio to HDMI. However, the input source should be in HDMI. 
 
DVD Player   
HDMI Cable (Cable not supplied)(Cable not supplied) 
 

 
ViewSonic N4200w  18 
3.  Connect to the PC 
VGA (15pin D-Sub):  
Connect the VGA cable from VGA output of PC to the VGA terminal input of N4200W. 
PC up to 1280 x 1024 , or 1360 x 768 is the preferred resolution. 
 
PC Audio in: 
Connect the Audio In cable (green) from audio output of your PC to the audio input terminal 
(green) of N4200W. 
 
 PC 
PC 
PC Audio in Cable 
(Cable not supplied) VGA 15 Pin Cable