ViewSonic Nd4210w Users Guide

ViewSonic ND4210w13
BROWSER CONFIGURATION
TheBrowser Configuration screen allows you to make specific screen settings for a specific 
URL that you chose. Click Management > Browser. The screen shown below appears. Note: 1 
millisecond = 1/1000th second.
1. In the Macromedia Flash Transparency Source field, select one of the options from the 
pull-down menu.
2. In the Screen rotation angle (clockwise) field, select one from the pull-down menu for the 
angle of rotation of the HTML content displayed...

14ViewSonic ND4210w
7. In the Start screen display time field, type the number of milliseconds you want the initial 
screen to be displayed at startup. (1 millisecond = 1/1000 second)
8. In the Screen Height field, type the height of the screen that is displaying your graphics 
image.
9. In the Screen Width field, type the width of the screen that is displaying your graphics image.
10. If any changes were made to this screen, do the following: 
 To enable the changes, click Apply
 To save the changes,...

ViewSonic ND4210w15
VNC CLIENT (MANAGEMENT)
TheVNC* client configuration screen shown below on the Management menu lets you set the 
device to start as a VNC client and connect automatically to the VNC server specified. This auto-
start feature works only if the VNC client under System services is set to YES or Enabled.
VNC server password must be at least 6 characters (can be alpha-numeric).
X and Y coordinates let you set the size of the window of the remote desktop displayed if full 
screen is not...

16ViewSonic ND4210w
This screen is used to adjust the display and audio parameters. Click Management > Video/
Audio. The screen shown below appears.
1. Move the Brightness slider: values range between -128 and 127
2. Move the Contrast slider: values range between 0 and 255
3. Move the Saturation slider: values range between 0 and 255
4. Move the Audio Channel Volume (left) slider: values range between 0 and 100
5. Move the Audio Channel Volume (right) slider: values range between 0 and 100
6. If any...

ViewSonic ND4210w17
TA S  CONFIGURATION
This screen works in conjunction with TA S. (TAS software can be purchased through Tivella at 
www.tivella.com or through an authorized Tivella dealer/reseller.) Click Management > TA S. The 
screen shown below appears.
1. In the Timeout (sec) field, type the number of seconds for the ND4210w to access TAS.
2. In the IP Address field is a valid DNS name automatically generated by TAS when 
connected to a network but empty when used as a standalone.
3. If any...

18ViewSonic ND4210w
FTP SERVER
FTP server is only for Network Displays with local storage. The FTP server allows you to use an 
FTP client for uploading files. 
 

ViewSonic ND4210w19
SYSTEM SERVICES CONFIGURATION
Configure System Services in the MIB (Management Information Base) to manage the following 
groups: Network, Browser, Video/Audio, TAS, and System Services. Click Management > 
System services. The screen shown below appears.
1. In the Network Media Player (port 6666) field, select Yes to access the ND4210w using a 
Telnet client on port 6666. If you do not want this, select No.
2. In the MIB Event Notification field, select Ye s to be notified of changes...

20ViewSonic ND4210w
ACTIONS
This section mainly concerns video related activities. Video can be streamed by UDP, RTP, IP/TV 
or HTTP stream and organized in Playlists. When you initiate a stream, you can see the video on 
your display. You can also change the Transparency of the OSD or go to a specific URL on the fly.
VIDEO UDP/RTP MULTICAST
This screen allows you to play streams using assorted protocols. Select Actions > Video 
Multicast. The screen shown below appears.
1. In the IP address field, type...

ViewSonic ND4210w21
VIDEO HTTP
To get to the browser setup screen, click Actions > Video HTTP. The screen shown below 
appears.
1. In the URL field, type the URL that corresponds to the HTTP stream that you want to appear 
on the display (for example: http:192.168.12.x/movie.mpg, or, http:///file.mpg).
2. To tell the system to listen to the HTTP stream from the entered URL, click Start.
 

22ViewSonic ND4210w
VIDEO IPTV
The Video IPTV screen allows you to play Split Stream files where the video and audio 
information being streamed is in two different addresses. This is similar to RTP and UDP 
multicast except the values for video and audio are entered separately. To get to the Video IPTV
screen, click Actions > Video IPTV. The screen shown below appears.
1. Under Video, enter the IP Address and Port of the Video stream
2. Under Audio, enter the IP Address and Port of the Audio stream
3....