ViewSonic Pj452 Projector User Manual

							ViewSonic PJ452 27 
PICTURE menu 
With the PICTURE menu, items shown in the table below 
can be performed. 
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button on 
the remote control to progress. Then perform it referring to 
the following table. 
 
Item Description 
BRIGHT  Using the buttons ▲/▼ adjusts the brightness. 
Light ↔ Dark 
CONTRAST  Using the buttons ▲/▼ adjusts the contrast. 
Strong ↔ We a k  
Using the buttons ▲/▼ switches the GAMMA 
mode. 
#1 DEFAULT
						

							ViewSonic PJ452 28  PICTURE menu (continued) 
Item Description 
Using the buttons ▲/▼ switches the 
mode of color temperature. 
HIGH 
						

							ViewSonic PJ452 29  PICTURE menu (continued) 
Item Description 
PROGRESSIVE  Using the buttons ▲/▼ switches the progressive mode. 
TV 
						

							ViewSonic PJ452 30 
IMAGE menu 
With the IMAGE menu, items shown in the table below can 
be performed.   
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button on 
the remote control to progress. Then perform it referring to 
the following table. 
 
 Item  Description 
ASPECT  Using the buttons ▲/▼ switches the mode for aspect ratio.   
At a RGB signal 
4:3 
						

							ViewSonic PJ452 31  IMAGE menu (continued) 
Item Description 
H SIZE  Using the buttons ▲/▼ adjusts the horizontal size. 
Large ↔ Small   
• This item can be chosen only at a RGB signal 
• When this adjustment is excessive, the picture may not be 
displayed correctly. In such a case, please reset the adjustment 
pressing the RESET button during this operation. 
AUTO ADJUST 
EXECUTE Choosing this item performs the automatic adjustment feature. 
At a RGB signal 
The vertical position, the horizontal position, the clock phase 
and horizontal size will be automatically adjusted. 
Make sure that the application window is set to its maximum 
size prior to attempting to use this feature. A dark picture may 
still be incorrectly adjusted. Use a bright picture when 
adjusting. 
At a video signal 
The video format best suited for the respective input signal will 
be selected automatically. 
This function is available only when the AUTO mode is 
selected to the item VIDEO FORMAT of INPUT menu. For a 
component video signal, the signal type is identified 
automatically, independently of this function. 
• The automatic adjustment operation requires approximately 
10 seconds. Also please note that it may not function correctly 
with some input. 
  
						

							ViewSonic PJ452 32 
INPUT menu 
With the INPUT menu, items shown in the table below can 
be performed. 
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button on 
the remote control to progress. Then perform it referring to 
the following table. 
 
Item Description 
COLOR 
SPACE Using the buttons ▲/▼ switches the mode for color space.   
AUTO 
						

							ViewSonic PJ452 33  INPUT menu (continued) 
Item Description 
FRAME LOCK  Using the buttons ▲/▼ turns the frame lock function on/off. 
TURN ON 
						

							ViewSonic PJ452 34 
SETUP menu 
With the SETUP menu, items shown in the table below can 
be performed. 
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button on 
the remote control to progress. Then perform it referring to 
the following table. 
 
 Item  Description 
ZOOM Using the buttons ▲/▼ adjusts the zoom (magnifying power). 
Large ↔ Small 
KEYSTONE Using the buttons ▲/▼ corrects the keystone distortion. 
Upper in the data ↔ Lower in the data 
• The adjustable range of this function will vary with the type of 
input signal. At some signals, this function may not work well. 
• When the V:INVERT or the H&V:INVERT is selected under 
the item MIRROR, if the projector screen is inclined or if the 
projector is angled downward, this function may not work 
correctly. 
• When the zoom adjustment is set to the TELE side, this 
correction may be excessive. This function should be used with 
zoom set to WIDE whenever possible. 
WHISPER Using the buttons ▲/▼ turns off/on the whisper mode. 
NORMAL 
						

							ViewSonic PJ452 35 
SCREEN menu 
With the SCREEN menu, items shown in the table below 
can be performed. 
Choose an item using the cursor buttons ▲/▼ on the 
projector or remote control, and press the cursor button ► 
on the projector or remote control, or the ENTER button 
on the remote control to progress. Then perform it 
referring to the following table. 
 
 Item  Description 
LANGUAGE Using the buttons ▲/▼ switches the OSD (On Screen Display) 
language. 
ENGLISH 
						

							ViewSonic PJ452 36  SCREEN menu (continued) 
Item Description 
START UP  Using the buttons ▲/▼ switches the mode for the start up screen. 
The start up screen is the screen displayed when no signal or an 
unsuitable signal is detected. 
MyScreen