ViewSonic Pj458d Projector User Manual

20
ViewSonic PJ458D

Using the Projector
Control Panel
LED
1.   POWER (Power LED indicator)
  Refer to “Indicator Messages”.
2.   LAMP (Lamp LED indicator)
  Refer to “Indicator Messages”.
Button Function
1.   
  Refer to “Powering On/Off the Projector”.
2.   MENU \ ENTER 
  Press  the  MENU\ENTER  button  to  activate  the  OSD  (On-Screen  Display) 
menu.  Use  the  directional  buttons  and  MENU\ENTER  button  to  navigate 
through the OSD (On-Screen Display) menu and select choices.
3.   KEYSTONE...

21
ViewSonic PJ458D

Remote Control
1.   Power 
  Refer to “Powering On/Off the Projector”.
2.   Four direction buttons
  The  four  direction  buttons 
///
c a n  b e  u s e d  t o  s c r o l l  t h r o u g h  O S D 
(On-Screen  Display)  menus  and  make 
adjustments.
3.   Menu 
  Press  the  Menu  button  to  activate  the  OSD  (On-Screen  Display)  menu.  Use 
the directional buttons and Menu button 
to navigate through the OSD (On-Screen 
Display) menu.
4.   Enter
  Confirms the selection
5....

22
ViewSonic PJ458D

Batter y Replacement
  Keep the battery out of the reach of children. There is a danger of death by 
accidentally swallowing the battery.
  Do not recharge the used battery or expose the battery to fire or water.
  Do not dispose of the used battery along with household waste. Dispose of 
used batteries according to local regulations.
  Avoid  excessive  heat  and  humidity.  Danger  of  explosion  may  happen if  a  battery  is  incorrectly  replaced.  Replace  only  with  the  same...

23
ViewSonic PJ458D

203m20
7m
2020
7m
3m
3m
3m
POWER   
MUTE
4:3/16:9
    
 K
EY ST
ONE
LASER
EN
TER                               B
LAN KMENU
VO LUM E A
UTO
SOURCE
POWER  MUTE4:3/16:9     KEYSTONELASERENTER    
  
                      
   BLANKMENUVOLUMEAUTOSOURCE
POWER  
MUTE4:3/16:9     KEYSTONELASERENTER                               BLANKMENUVOLUME
AUTOSOURCE
POWER  
MUTE4:3/16:9     KEYSTONELASERENTER                               BLANKMENUVOLUME
AUTOSOURCE
POWER  
MUTE4:3/16:9...

24
ViewSonic PJ458D

Menu Options
The  projector  has  multi-language  OSD  (On-Screen  Display)  menus  that  can  only 
be  displayed  when  an  input  source  is  present. The  menus  can  be  accessed  using 
either the Projector Control Panel or the Remote Control.
The  OSD  (On-Screen  Display)  menus  allow  you  to  make  image  adjustments  and 
change a variety of settings. If source is a computer, the OSD (On-Screen Display) 
allows changes to the Display tab. When using a video source, the...

25
ViewSonic PJ458D

Option  Actions/Descriptions 
Contrast  Controls the degree of difference between the lightest  
  and darkest parts of the picture. Adjusting the contrast  
  changes the amount of black and white in the image.
  Select the desired setting with the 
/ buttons:
  Press the  button to decrease the contrast.
  Press the  button to increase the contrast. 
Brightness  Adjusts the brightness of the image. 
  Select the desired setting with the 
/ buttons:
  Press the  button to...

26
ViewSonic PJ458D

  Select the desired setting with the / buttons:
   1:1:  The input source will be displayed without scaling
   16:9: The input source will be displayed in wide screen  
      mode (16:9) without scaling. The source will be scaled  
      to fit the width of the screen.
   4:3:   The input source will be scaled to fit the screen.
Blank Screen  Blanks the screen temporarily, and selects the screen  
  color when Blank Screen is active.
  Select the desired setting with the 
 / ...

27
ViewSonic PJ458D

  Select the desired setting with the  /  buttons:
  Hi
  Mid
  Low
  User 
Red  Manually adjusts red.
  Select the desired setting with the 
 /  buttons:
  Press the  button to decrease the color temperature.
  Press the  button to increase the color temperature.
Green  Manually adjusts green.
  Select the desired setting with the 
 /  buttons:
  Press the  button to decrease the color temperature.
  Press the  button to increase the color temperature.
Blue  Manually...

28
ViewSonic PJ458D

Video
Option  Actions/Descriptions 
Saturation  Adjusts a video image from black and white to fully saturated color.
  Select the desired setting with the 
 /  buttons:
  Press the  button to decrease the amount of color in the  
    image.
  Press the  button to increase the amount of color in the   
    image. 
Tint  Adjusts the color balance of red and green.
  Select the desired setting with the 
 /  buttons:
  Press the  button to increase the amount of green in the...

29
ViewSonic PJ458D

Option  Actions/Descriptions 
Phase  Synchronizes the signal timing of the display with that of the    
  graphic card. If you experience an unstable or flickering    
  image, use the phase function to correct it.
  Select the desired setting with the 
 /  buttons:
  Press the  button to decrease the value.
  Press the  button to increase the value. 
Tracking  Changes the display data frequency to match the frequency  
  of your computer graphic card. If you experience a...