ViewSonic Pj506d Projector User Manual
Have a look at the manual ViewSonic Pj506d Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
16ViewSonic PJ506D Powering On/Off the Projector Powering on the projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and per pheral s gnal cable(s) connect ons. 3. Press button to turn on the projector. 4. Turn on your source (computer, notebook, DVD, etc.). The projector automat cally detects your source. When search ng message appears on the screen, ensure that the appropr ate s gnal cable(s) are securely connected. The s gnal message w ll appear on the screen when the source s detected. If you are connect ng mult ple sources to the projector s multaneously, press Source button. Warn ng: Remove the lens cap first before powering on. Never look nto the lens when the lamp s on. Th s can damage your eyes. It s espec ally mportant that ch ldren are not allowed to look nto the lens. Powering Off the Projector: 1. Press button to turn off the projector lamp. You w ll see a message “Power Off? Press Power aga n” appear on the screen. 2. Press button again to confirm. 3. The cool ng fans cont nue to operate for cool ng cycle and the Lamp LED goes out. When the Power LED beg ns flash ng, the projector has entered standby mode. If you w sh to turn the projector back on, you must wa t unt l the projector has completed the cool ng cycle and has entered standby mode. Once n standby mode, s mply press button to restart the projector. 4. D sconnect the power cord from the electr cal outlet and the projector. 5. Do not turn on the projector mmed ately follow ng a power off procedure. Please wait until the fan motor and the Lamp LED turn off before removing the AC power cord from the projector.
ViewSonic PJ506D17 Adjusting the Projected Image Adjusting the Projector Height The projector s equ pped w th an elevator foot to adjust the mage he ght. To ra se the mage: 1. Press the elevator button. 2. Ra se the mage to the des red he ght angle, then release the button to lock the elevator foot nto pos t on. To lower the mage: 1. Press the elevator button. 2. Lower the mage, then release the button to lock the elevator foot nto pos t on. To avoid damaging the projector, make sure that the elevator foot is fully retracted before placing the projector in its carrying case. Elevator foot Elevator button
18ViewSonic PJ506D Adjusting the Projector Zoom and Focus 1. Focus the mage by rotat ng the focus r ng. A st ll mage s recommended for focus ng. 2. Adjust the mage by rotat ng the zoom r ng. Rotate to the r ght to reduce the mage. Rotate to the left to enlarge the mage. Focus ringZoom ring
ViewSonic PJ506D19 Position the projector in a horizontal position; other positions can cause heat build-up and damage to the projector. Make sure the heat ventilation holes are not blocked. Do not use the projector in a smoky environment. Smoke residue may cause buildup on critical parts. 27.50 (Min.) 57.70 82.40 137.40 275.00 (Max.) 256.00 128.0076.5053.7025.60 1.0m 3.0m 5.0m 10.0m 2.1m PROJECTION DISTANCE (METER) 4:3 SCREEN SIZE- DIAGONAL (INCH) W de Tele 1.0 27.50 25.60 2.1 57.70 53.70 3.0 82.40 76.50 5.0 137.4 128.0 10.0 275.00 256.00 Adjusting Projection Image Size Refer to the graph c and table below to determ ne the screen s ze and project on d stance.
20ViewSonic PJ506D Menu Operation The projector has mult l ngual On Screen D splay menus that allow you to make mage adjustments and change a var ety of sett ngs.
ViewSonic PJ506D21 How to operate 1. Press Menu button to open the OSD menu. 2. When OSD s d splayed, use / buttons to select any feature n the ma n menu. After select ng the des red ma n menu feature, press button to enter sub-menu for feature sett ng. 3. Adjust the sett ngs w th / buttons. 4. To return to the ma n menu, toggle button. 5. To ex t OSD, press Menu button. The OSD menu w ll close and the projector w ll automat cally save the new sett ngs. To ex t OSD from the sub-menu, press Enter button.
22ViewSonic PJ506D Image (Computer / Video Mode) ContrastThe contrast controls the degree of d fference between the l ghtest and darkest parts of the p cture. Adjust ng the contrast changes the amount of black and wh te n the mage. Press to decrease the contrast. Press to ncrease the contrast. Brightness Adjusts br ghtness of the mage. Press to darken the mage. Press to l ghten the mage. Keystone Adjusts mage d stort on caused by t lt ng the projector. Aspect Ratio Use th s funct on to choose your des red mage s ze. 1 :1: Keep the mage w th or g nal w dth-he ght rat o. 16:9: The input source will be scaled to fit the width of the screen. 4:3: The input source will be scaled to fit the projection screen. Blank Screen Blanks the screen temporar ly, and selects the screen color when th s funct on s act ve. Gamma Selects Gamma mode. RGB: Computer text mode Photograph c: Computer photo mode V deo: Common v deo mode F lm: Dark v deo mage mode White Peaking The wh te peak ng control adjusts the wh te peak ng level of the DMD ch p. 0 stands for m n mal segment, and 10 stands for max mum segment. If you prefer a stronger mage, adjust towards the max mum sett ng. For a smooth and more natural mage, adjust towards the m n mum sett ng. Color TemperatureAdjusts color temperature. At h gher temperature, the screen looks colder; at lower temperature, the screen looks warmer. If you select “User”, “Red”, “Green” and “Blue” can be adjusted.
ViewSonic PJ506D23 Red Manually adjusts red. Green Manually adjusts green. Blue Manually adjusts blue. Video (Video Mode) Saturation Adjusts a v deo mage from black and wh te to fully saturated color. Press to decrease the amount of color n the mage. Press to ncrease the amount of color n the mage. Tint Adjusts the color balance of red and green. Press to ncrease the amount of green n the mage. Press to ncrease the amount of red n the mage. Sharpness Adjusts the sharpness of the mage. Press to decrease the mage. Press to ncrease the mage. Display (Computer Mode) Phase “Phase” synchron zes the s gnal t m ng of the d splay w th that of the graph c card. If you experience an unstable or flickering image, use the phase function to correct it. Tracking “Track ng” changes the d splay data frequency to match the frequency of your computer graphic card. If you experience a vertical flickering bar, use the tracking funct on to make an adjustment. H.Position (Horizontal Position) Press to move the mage left. Press to move the mage r ght. V.Position (Vertical Position) Press to move the mage down. Press to move the mage up.
24ViewSonic PJ506D Audio (Computer / Video Mode) Volume Press to decrease the volume. Press to ncrease the volume.Mute Choose “ON” to turn mute on. Choose “OFF” to turn mute off. Language (Computer / Video Mode) Choose the mult l ngual OSD menu. Use / to select your preferred language. Press “Menu” to finalize the selection. Advanced (Computer / Video Mode) Auto Source SelectAutomat cally scans the nput source. Press “Menu” to conf rm or cancel the select on. RearThe mage s reversed hor zontally. Press “Menu” to conf rm or cancel the select on. CeilingThe image is inverted vertically. Press “Menu” to confirm or cancel the selection. ECO ModeUse th s funct on to d m the projector lamp l ght output wh ch w ll lower power consumpt on and ncrease lamp l fe. Lamp HoursD splays Hour the lamp’s elapsed operat ng t me ( n hours). Color SpaceManually selects s gnal type. RGB YCbCr YPbPr Auto ShutdownUses th s funct on to automat cally turn off the lamp f the projector does not detect an input signal for specified time period (30 minutes). OSD TimeoutDurat on OSD menu stays act ve (at dle state by second). Menu PositionChoose the menu pos t on on the d splay screen. High AltitudeTurn ng on H gh Alt tude mode operates the fans at full speed cont nuously to allow for proper h gh alt tude cool ng of the projector. Factory ResetPress “Menu” to enter ts menu. Use / to choose “” and press “Menu” to return the d splay parameters on all menus to the factory default sett ngs.
ViewSonic PJ506D25 Maintenance The projector needs proper ma ntenance. You should keep the lens clean as dust, d rt or spots w ll project on the screen and d m n sh mage qual ty. If any other parts need replacing, contact your dealer or qualified service personnel. When cleaning any part of the projector, always switch off and unplug the projector first. Warning: Never open any of the covers on the projector. Dangerous electr cal voltages ns de the projector can cause severe njury. Do not attempt to serv ce th s product yourself. Refer all servicing to qualified service personnel. Cleaning the Lens Gently w pe the lens w th lens clean ng paper. Do not touch the lens w th your hands. Cleaning the Projector Housing Gently w pe w th a soft cloth. If d rt and sta ns are not eas ly removed, use a soft cloth damped w th water, or water and neutral detergent, and w pe dry w th a soft, dry cloth. Turn off the projector and remove the AC power cord from the power outlet before beginning maintenance work. Make sure the lens is cool before cleaning. Do not use detergents or chemicals other than those noted above. Do not use benzene or thinners. Do not use chemical sprays. Use a soft cloth or lens paper only.