Home > ViewSonic > Projector > ViewSonic Pj520 Projector User Manual

ViewSonic Pj520 Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual ViewSonic Pj520 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 617 ViewSonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Specifications
    This specifications are subject to change without notice.
    Outline Dimension
    Item Specification
    Product name
    Liquid crys-
    tal projectorPanel size 1.8 cm (0.7 type)
    Drive system TFT active matrix
    Pixels
    Lens Zoom lens F=1.7 ~ 1.9 =21.7~26.1 mm
    Lamp 150 W UHB
    Speaker 1.0W
    Power supply AC100 ~ 120V, 2.7A / AC220 ~ 240V, 1.3A
    Power consumption 240W (typ.)
    Temperature range 0 ~ 35°C (32~95° F) (Operating)
    Size 295 (W) x 87.5 (H) x 237 (D) mm
    11.6 (W) x 3.4 (H) x 9.3 (D) inches
    Weight (mass) 2.7 kg (6.04 lbs)
    PortsRGB Terminal
    RGB IN (1,2).................................. 2
    VIDEO Terminal
    VIDEO IN....................................... 1
    S-VIDEO IN ................................... 1
    COMPONENT VIDEO
    (Y,  C
    B/PB/, CR/PR) ........................ 1AUDIO Terminal
    AUDIO IN (R, L) .................................. 1
    OUT Terminal
    RGB OUT............................................ 1
    CONTROL Terminal
    CONTROL .......................................... 1
    USB..................................................... 1
    Optional Parts
    ViewSonic offers other accesories including items such as air filters, remote controls, 
    ceiling mounting brackets, manuals, soft cases, etc. Please contact your dealer or 
    ViewSonic for information.
    Unit: mm
    PJ650 / PJ520
    PJ650: 786,432 pixels (1024 horizontal x 768 vertical)
    PJ520: 480,000 pixels (800 horizontal x 600 vertical)
    ViewSonic  PJ650/PJ520 38
    Lamp: RLU-150-001 
    						
    							Customer Support
    For technical support or product service, see the table below or contact your 
    reseller.
    NOTE: You will need the product serial number.
    Country/
    RegionWeb site T = Telephone
    F = FAXEmail
    United States
    Canadaviewsonic.com/
    support
    viewsonic.com/
    supportT: (800) 688-6688
    F: (909) 468-1202
    T: (800) 688-6688
    F: (909) 468-1202service.us@
    viewsonic.com
    service.ca@
    viewsonic.com
    United Kingdom viewsoniceurope.com
    T: 0800 833 648
    F: (01293) 643910service.eu@
    viewsoniceurope.com
    Europe, Middle 
    East, Baltic 
    countries, and 
    North Africaviewsoniceurope.com Contact your 
    resellerservice.eu@
    viewsoniceurope.com
    Australia and New 
    Zealandviewsonic.com.auT: +61 2 9906 6277
    F: +61 2 9906 6377service@au.
    viewsonic.com
    Singapore/
    Malaysia/Thailandviewsonic.com.sgT: 65 273 4018
    F: 65 273 1566service@sg.
    viewsonic.com
    Other Asia/Pacific 
    countries viewsonic.com.twT: 886 2 2246 3456
    F: 886 2 8242 3668service@sd.
    viewsonic.com
    South Africa viewsonic.com/asiaT: 886 2 2246 3456
    F: 886 2 8242 3668service@sd.
    viewsonic.com
    ViewSonic  PJ650/PJ520 39 
    						
    								
    
    	
    
    
    
    
      
    	
    
    			
    
    	
    	
    
    
    
    				
    
    	
    	
    
      		
    	
    
    	
    
    
    		
    
    
    
    
    
    	
    
    
    
    	
    
    
    
    !# $$ 
    %
    				
    
    
    
    &
     
    
    		
    		
      !		
    	
    	
     		
    			
    
    
    	#
    
    				
    
    	
    	
    
    		
    
    
     
    	
    
    	
    	#
    
      
     
    
    
    	
    
     		
    
    
     $
    %
    
    
    	
    
    
    		
    
     &
    
    	
    	
    
      
    			
     (
     
    	
    
    
    ) 		*
    	
    !# 
     +		
    			
    
    
      ()(%%,
    	
    	
    
    
    
    	
    
      		
    	-
    	
    	./			
    ./
    ./
    ./
    	
    	
    ./	
    
    
    
    ) 	
    
    
    	
    
    					
    	#
    
      	
    
      
    0 +				
    
      	
    
      
     )  $ )% & 
    1222(34(2526725538792!41$1262(!:2,3(!12!25$73($3((2!
    122(($9&!(;128792!4(,3+82$1(:9,(!+(255+37$&9
    7&7352
    *( $&)#
    
    59:9,5982!312$353+273279$282(3+1273!&$
    
    5199(3:29:92+3
     !8;233127372,$&52!:,(,!2+2$5(1273!&$!8;25:52!&73(($3(
    						
    							Appendix
    Power Cord Safety Guidelines
    Caution: 
    Use a power cable that is properly grounded. Always use an AC power cord that meets your 
    country’s safety standard.
    AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM
    FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
    IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG 
    SHOULD BE CUT OFF AND DISPOSED OF SAFELY.
    THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN 
    APPROPRIATE SOCKET.
    If a new plug is to be fitted, please observe the wiring code as shown below.
    If in any doubt, please consult a qualified electrician.
    WARNING:
     THIS APPLIANCE MUST BE EARTHED.
    IMPORTANT:
     The wires in this mains lead are coloured in accordance with the following code: 
    Green-and-Yellow: Earth
    Blue: Neutral
    Brown: Live
    If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings 
    identifying the terminals in your plug, proceed as follows:
    The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is 
    marked by the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
    The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter 
    N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug 
    which is marked with the letter L or coloured RED.
    IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
    The power cord set for this unit has been enclosed and has been selected according to the country of 
    destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to 
    replace the original cord set, or if the cord set is not enclosed. 
    The female receptacle of the cord set must meet CEE-22 requirements and may look like (Figure A1 below):
    For the United States and Canada
    In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA 
    Labeled. For units which are mounted on a desk or table, type SVT cord sets may be used. The cord set must 
    be selected according to the current rating for your unit. Please consult the table below for the selection 
    criteria for power cords used in the United States and Canada.
    For customers in Canada:
    Notice: This Class B digital apparatus complies with Canadian ICES-003.
    For European Countries
    In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is 
    HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the inner 
    conductors.
    If you have any questions concerning which proper power cord to use, please consult with the dealer from 
    whom you have purchased the product.USA .............................. UL
    Canada ......................... CSA
    Germany....................... VDESwitzerland ...................SEV
    Britain ............................BASE/BS
    Cord Type Size of Conductors in Cord Maximum Current Rating of Unit
    SJT 18 AWG
    16 AWG
    14 AWG10 Amps
    12 Amps
    12 Amps
    SVT 18 AWG
    17 AWG10 Amps
    12 Amps
    Figure 1
    Figure 2
    ViewSonic  PJ650/PJ520 41 
    						
    							Compliance Information for U.S.A.
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
    part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
    interference in a residential installation. This equipment generates, uses, and can radiate radio frequency 
    energy, and if not installed and used in accordance with the instructions, may cause harmful interference to 
    radio communications. However, there is no guarantee that interference will not occur in a particular 
    installation. If this equipment does cause harmful interference to radio or television reception, which can be 
    determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 
    one or more of the following measures:
     Reorient or relocate the receiving antenna.
     Increase the separation between the equipment and receiver.
     Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
     Consult the dealer or an experienced radio/TV technician for help.
    FCC Warning
    To assure continued FCC compliance, the user must use grounded power supply cord and the provided 
    shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a 
    shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the party 
    responsible for compliance could void the users authority to operate this device.
    Instructions to Users
    This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that 
    the following condition is met. Use the cables which are included with the projector or specified.
    Compliance Information for Canada
    Notice: 
    This class B digital apparatus complies with Canada ICES-003.
    AV I S :  
    Cet appeil numerique de la Classe B conforme a la norme NMB-003 du Canada.
    Compliance Information for European Countries
    CE Conformity
    The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/
    31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as 
    amended by 93/68/EEC Art.13 with regard to “Safety.”
    User Information for all Countries
    NOTICE:
    Use the cables which are included with the projector or specified.
    ViewSonic  PJ650/PJ520 42 
    						
    All ViewSonic manuals Comments (0)

    Related Manuals for ViewSonic Pj520 Projector User Manual