ViewSonic Pj568d Projector User Manual

							
24ViewSonic	 PJ588D/PJ568D/PJ508D

ITEMDESCRIPTIONDEFAULT
Security 
Lock
Press the cursor  button to Enable or Disable Security 
Lock. When you enable Security Lock a Register Password 
dialog box appears: 
You can only use the following cursor buttons,     in 
the password fields. Press the cursor buttons five times in any 
order and con-firm to set the password. When the password is 
enabled, it must be entered every time after you power on the 
projector. See “Setting an Ac-cess Password (Security Lock)” 
on page 13 for steps on setting the password.
Disable
ResetPress Enter or  to reset advanced feature settings to default 
values—
Note:
If Security Lock is enabled, you must enter the password every time the projector is turned on. How-
ever, if the projector is already turned on, Security Lock can be disabled without knowing the current 
password. 
						

							
25ViewSonic	 PJ588D/PJ568D/PJ508D

User Color
Press	the	Menu	button	to	open	the	OSD	menu.	Press	to	move	to	the	Setup	menu.	Press	
	to	move	to	the	Advanced Feature	menu	and	then	press	Enter or	.	Press		to	move	
to	the	User Color	menu	and	then	press Enter or	.	Press		to	move	up	and	down	to	select	a	
color.	Press		
	to	change	values	for	sett  ngs.
ITEMDESCRIPTIONDEFAULT
RedPress the cursor  button to adjust the red color level  (Range: 0 – 100)80
GreenPress the cursor  button to adjust the green color level  (Range: 0 – 100)80
BluePress the cursor  button to adjust the blue color level  (Range: 0 – 100)80
CyanPress the cursor  button to adjust the cyan color level  (Range: 0 – 100)80
MagentaPress the cursor  button to adjust the magenta color level (Range: 0 – 100)80
YellowPress the cursor  button to adjust the yellow color level  (Range: 0 – 100)80
WhitePress the cursor  button to adjust the white color level  (Range: 0 – 100)80
ResetReset all User Color settings to default values— 
						

							
26ViewSonic	 PJ588D/PJ568D/PJ508D

Config Menu 
Press	the	Menu	button	to	open	the	Main	menu.	Press	the	cursor		button	to	move	to	the 
Config	menu.	Press	the	cursor		button	to	move	up	and	down	n	the	Config	menu. 	Press	
	to	change	values	for	sett  ngs.
ITEMDESCRIPTIONDEFAULT
Blank ScreenPress the cursor  button to select a background color for the blank screen (Range: Black – Red – Green – Blue – White) Blue
Auto SourcePress the cursor  button to enable or disable automatic source detection(Range: On – Off)On
Auto Power OffPress the cursor  button to enable or disable automatic shut-down of lamp after 10 minutes of inactivity(Range: On – Off)Off
VolumePress the cursor  button to adjust the audio volume level (Range: 0 - 8)4
Menu  PositionPress the cursor  button to position the OSD on screen (Range: Left – Right – Center – Down – Up)Center
Menu DisplayPress the cursor  button to determine the timeout delay of the OSD (Range: 10 – 20 sec.)15
Translucent MenuPress the cursor  button to set menu screen translucency (Range: 0% – 100%)0%
ResetReset all Config items to default values－
Note:
The Config menu functions are available to all video sources. 
						

							
27ViewSonic	 PJ588D/PJ568D/PJ508D

Utility Menu 
Press	the	Menu	button	to	open	the	Main	menu.	Press	the	cursor		button	to	move	to	the	Utility 
menu.	Press	the	cursor		button	to	move	up	and	down	n	the	Utility	menu. 	Press		to	
change	values	for	sett  ngs.
ITEMDESCRIPTIONDEFAULT
Video TypePress the cursor  button to select the video standard (Range: Auto – NTSC – PAL – SECAM)Auto
Projection
Press the cursor  button to choose from four projection methods:
Desktop front
Desktop mount, front of the screen
Desktop mount, rear of the screen
Ceiling mount, front of the screen
Ceiling mount, rear of the screen
FrequencyPress the cursor  button to adjust the A/D sampling clock (Range: 0° - 180°)Auto detected
TrackingPress the cursor  button to adjust the A/D sampling number (Range: 1 - 100)Auto detected 
						

							
28ViewSonic	 PJ588D/PJ568D/PJ508D

Digital Zoom
Digital operation for zoom and pan adjustment. Press  Enter or . The Zoom menu appears.
Press	 to zoom in; press  to zoom out. Press Enter or  to open the Pan menu.  (You must zoom in before you can open the Pan menu.)
Use the cursor buttons to pan the zoomed image. Press the Menu button to exit.
—
ResetReset Video Type, Video, Projection, and Digital Zoom to default values—
Utility Menu Functions Available for Connected Source
FunctionRGBComponent VideoComposite VideoS-Video
V

deo
	Typexx
Project

on
xxxx
Frequencyx
Track

ng
x
D

g

tal
	Zoomxxxx
Resetxxxx
x	 = 	ava  lable	to	v deo	source 
						

							
29ViewSonic	 PJ588D/PJ568D/PJ508D

Language Menu 
Press	the	Menu	button	to	open	the	OSD	menu.	Press	the	cursor		button	to	move	to	the	
Language	menu.	Press	the	cursor		button	to	move	up	and	down	n	the	Language	menu. 	
Select	the	value,	and	then	press	Enter	to	confirm	the	new	sett  ng.
ITEMDESCRIPTIONDEFAULT
Language
Press the cursor  to select the desired language. 
Language options: English, French, Spanish, German, 
Portuguese, Chinese-Simplified, Chinese-Traditional, 
Russian, Italian.
English 
						

							
30ViewSonic	 PJ588D/PJ568D/PJ508D

Status Menu 
Press	the	Menu	button	to	open	the	Main	menu.	Press	the	cursor		button	to	move	to	the	
Status	menu.	Press	the	cursor		button	to	move	up	and	down	n	the Status	menu.
ITEMDESCRIPTIONDEFAULT
Video  InformationDisplay the resolution and refresh rate for RGB/DVI mode. Display the color standard for video mode.
These items are display only.
Active SourceDisplay the active source
Software VersionDisplay information about the software version
Lamp HoursShow the number of hours lamp has been in use for Eco, Normal and Boost modes
Lamp Mode
Press the cursor  button to choose the lamp mode.  (Range: Eco; Normal, Boost)Eco mode uses less power and extends lamp life, but decreases lamp brightness.
Normal
Lamp Hour  ResetAfter replacing the lamp, this item should be reset. Refer to “Resetting the Lamp” on page 34.—
Daylight ModeAuto detect environment light source and adjust projectors brightness ac-cordingly— 
						

							
31ViewSonic	 PJ588D/PJ568D/PJ508D

MAINTENANCE AND SECURITY
Replacing the Projection Lamp
The	project on	lamp	should	be	replaced	when	t	burns	out. 	It	should	only	be	replaced	w  th	a	certified	
replacement	part,	wh  ch	you	can	order	from	your	local	dealer.	
Important:
The lamp contains a certain amount of mercury and should be disposed of according to local ordinance 
regulations.
Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life.
Warning:
Be sure to turn off and unplug the projector at least an hour before replacing the lamp. Failure to do so 
could result in severe burn.
 It is recommended that you do not attempt to replace the lamp while the projector is installed on a 
ceiling. If you do attempt this, wear protective goggles to prevent glass from a ruptured lamp getting 
into your eyes.
1.Lift the screw covers [A]. 
Remove the screws on the lamp com-
partment cover [B].
2.Lift the lamp compartment cover [C] 
exposing the lamp module. 
						

							
32ViewSonic	 PJ588D/PJ568D/PJ508D

3.Remove the two screws from the lamp module [A] and then lift the module handle up [B].
4.Pull up firmly to remove the lamp module.
5.Reverse Steps 1 to 4 to install the new lamp module.   Note: The lamp module should be oriented as shown here when replacing.
Resetting the Lamp
After	replac ng	the	lamp,	reset	the	lamp	hour	counter	to	zero.	Refer	to	the	follow  ng:
1.Press the Menu button to open the Main menu.
2.Press the cursor  button to move to the Status menu. 
3.Press the cursor  button to move to Lamp Hour Reset.
4.Press the Enter button.  A message screen appears. 
						

							
33ViewSonic	 PJ588D/PJ568D/PJ508D

5.Press the cursor buttons in this or-der:    . 
The “Lamp Hour Reset OK !!” mes-sage appears. Then the Status menu appears again showing the Lamp Hours reset to zero.