Home > ViewSonic > Projector > ViewSonic Pjd6383s Projector User Manual

ViewSonic Pjd6383s Projector User Manual

Here you can view all the pages of manual ViewSonic Pjd6383s Projector User Manual. The ViewSonic manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 11

6
Projector exterior view
1. External control panel
(See "Projector" on page 7 for 
details.)
2. Lamp cover
3. Vent (heated air exhaust)
4. Quick-release button
5. Focus and Zoom ring
6. Front IR remote sensor
7. Projection lens
8. Type B USB port
9. RJ45 LAN input port
10. RS-232 control port
11. HDMI port
12. RGB signal output socket
13. RGB (PC)/Component video 
(YPbPr/YCbCr) signal input 
socket-1/2
14. S-Video input socket
15. Video input socket
16. Audio signal input socket
Audio signal...

Page 12

7
Controls and functions
Projector
1. Focus ring
Adjusts the focus of the projected image.
2. Zoom ring
Adjusts the size of the image.
3. Keystone/Arrow keys ( / Up,  /
Down)
Manually corrects distorted images 
resulting from an angled projection.
4. Left/Blank
Hides the screen picture.
5. POWER indicator light
Lights up or flashes when the projector is 
under operation.
POWER
Toggles the projector between standby 
mode and on.
6. SOURCE
Displays the source selection bar.
7. Top IR remote sensor
Not...

Page 13

8
Remote control
To use the remote mouse control 
keys (Page Up, Page Down,  , and
), see "Using the remote mouse 
control" on page 10 for details.
1. POWER
Toggles the projector between standby 
mode and on.
2. Source selection keys (VGA 1/VGA 
2/Video)
Selects an input source for display.
Video/
Selects Video,S-Video or HDMI
source for display.
Performs the same function as the 
right mouse button when the mouse 
mode is activated.
3. Source
Displays the source selection bar.
4. Keystone keys (...

Page 14

9
Remote control code
The projector can be assigned to two different remote control codes, A or B. When several 
adjacent projectors are in operation at the same time, switching the remote control codes 
can prevent interference from other remote controls. Set the remote control code for the 
projector first before changing that for the remote control.
To switch the code for the projector, select A or B in the SYSTEM SETUP: Advanced > 
Remote Control Code menu.! 10. Lock
Activates or deactivates panel...

Page 15

10
To switch the code for the remote control, press PgUp and PgDn buttons on the remote 
control together for 5 seconds or more. The initial code is set to A. 
If different codes are set on the projector and remote control, there will be no response from 
the remote control. When that happens, switch the code for the remote control again.
Using the remote mouse control
The capability of operating your computer with the remote control gives you more 
flexibility when delivering presentations. 
1. Connect...

Page 16

11
Replacing the remote control batteries
1. To open the battery cover, turn the remote control over to view its back, push on the 
finger grip on the cover and slide it in the direction of the arrow as illustrated. The 
cover will slide off.
2. Remove any existing batteries (if necessary) and install two AAA batteries observing 
the battery polarities as indicated in the base of the battery compartment. Positive (+) 
goes to positive and negative (-) goes to negative.
3. Refit the cover by aligning it...

Page 17

12
Positioning your projector
Choosing a location
Your room layout or personal preference will dictate which installation location you select. 
Take into consideration the size and position of your screen, the location of a suitable power 
outlet, as well as the location and distance between the projector and the rest of your 
equipment.
Your projector is designed to be installed in one of four possible installation locations:
1. Front Table
Select this location with the projector placed near 
the floor...

Page 18

13
Projection dimensions
Refer to "Dimensions" on page 66 for the center of lens dimensions of this projector before 
calculating the appropriate position.
The "screen" mentioned below refers to the projection screen usually consisting of a surface 
and a support structure
PJD5126/PJD5226/PJD6223/PJD6253/PJD6353/
PJD6353s/PJD6383/PJD6383s
PJD5126/PJD5226/PJD6223
(a) Screen 
Size
[inch (m)]4:3 image on a 4:3 Screen 16:9 image on a 4:3 Screen
(b) Projection 
distance [m (inch)](c) Image...

Page 19

14
PJD6253
PJD6353/PJD6353s/PJD6383/PJD6383s
(a) Screen 
Size
[inch (m)]4:3 image on a 4:3 Screen 16:9 image on a 4:3 Screen
(b) Projection 
distance [m (inch)](c) Image 
height
[cm (inch)](d) Vertical 
offset
[cm (inch)] (b) Projection distance 
[m (inch)](c) Image 
height
[cm (inch)(d) Vertical 
offset
[cm (inch)]
min. max. min. max.
30(0.8) 0.9 (36) 1.2 (47) 46 (18) 3 (1.4) 0.9 (36) 1.2 (47) 34 (14) 9.1 (3.6)
40(1.0) 1.2 (48) 1.6 (63) 61 (24) 5 (1.8) 1.2 (48) 1.6 (63) 46 (18) 12.2 (4.8)
50(1.3) 1.5...

Page 20

15
PJD5226w/PJD6553w/PJD6653w/PJD6653ws/
PJD5226w
(a) Screen 
Size
[inch (m)]16:10 image on a 16:10 Screen 16:10 image on a 4:3 Screen
(b) Projection distance 
[m (inch)](c) Image 
height
[cm (inch)](d) Vertical 
offset
[cm (inch)] (b) Projection distance 
[m (inch)](c) Image 
height
[cm (inch)(d) Vertical 
offset
[cm (inch)]
min. max. min. max.
30(0.8) 0.97 (38) 1.06 (42) 40 (16) 0 (0.0) 0.91 (36) 1.00 (40) 38 (15) 3.8 (1.5)
40(1.0) 1.29 (51) 1.42 (56) 54 (21) 0 (0.0) 1.22 (48) 1.34 (53) 51 (20) 5.1...
Start reading ViewSonic Pjd6383s Projector User Manual

Related Manuals for ViewSonic Pjd6383s Projector User Manual

All ViewSonic manuals