ViewSonic Pjd6553w Projector User Manual

36
Setting the presentation timer
Presentation timer can indicate the presentation time on the screen to help you achieve  better time management when giving presenta tions. Follow these steps to utilize this  function: 
1. Press  Timer on the remote control to access the Presentation Timer menu or go to  
the  SYSTEM SETUP: Advanced > Presentation Timer menu and press MODE/ 
ENTER  to display the Presentation Timer page. 
2. Highlight  Timer Period and decide the time period by pressing  / . The length...

37
Hiding the image
In order to draw the audiences full attention to the  
presenter, you can use   on the projector or Blank on  the remote control to hide the screen image. Press any key on the projector or remote control to restore the image.  The word BLANK appears at the lower right  corner of the screen while the image is hidden. 
You can set the blank time in the SYSTEM SETUP:  Basic > Blank Timer  menu to let the projector return  the image automatically after a period of time when  there is no...

38
Freezing the image
Press Freeze on the remote control to freeze the  image. The word  FREEZE will be displayed in the  upper left corner of the screen.  To release the  function, press any key on the projector or remote control. 
Even if an image is frozen on the screen, the pictures  are running on the video or other device. If the  connected devices have active audio output, you will still hear the audio even though the image is frozen on screen.
Operating in a high altitude environment
We recommend...

39
Creating your own startup screen
This function is only available for the PJD6223/PJD6253/PJD6553w series.
In addition to selecting the projector preset startup screen from among ViewSonic logo,  Black or Blue screen, you can make your own star tup screen that is a picture projected from  your computer or video source. 
To create your own start up screen, project the picture you want to use as your startup screen  from either a computer or  video source. The rest of the steps are as follows. 
1. Press...

40
Controlling the projector through a LAN  
environment
This function is only available for the PJD6223/PJD6253/PJD6553w series.
The projector su pports Crestron® software. With correct settings for the LAN Control  Settings  menu, you can manage the projector from a computer using a web browser when  the computer and the projector  are properly connected to the same local area network. 
Configuring the LAN Control Settings
If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to...

41 
If you are in a non-DHCP environment:
1. Repeat steps 1-3 above. 
2. Press  to highlight  DHCP and press  /  to select Off. 
3. Contact your ITS administ rator for information on the Projector IP Address, Subnet  
Mask , Default Gateway, and DNS Server settings. 
4. Press   to select the item  you want to modify and press MODE/ENTER on the  
projector or  Enter on the remote control. 
5. Press  /  to move the cursor and the press  /  to enter the value. 
6. To save the settings, press  MODE/ENTER on...

42
controllers of AMX connected to the same network. For the Details of AMX Device  
Discovery, visit the AMX web site at  http://www.amx.com/. 
4. If your projector is connected to a ne twork which supports Simple Mail Transfer  
Protocol (SMTP), you can conf igure it to alert you via email on significant events. 
5. The Crestron (e-Control) page displays  the Crestron e-Control user interface. See  
About Crestron e-C ontrol® on page 43 for details.  
Please pay attention to the limi tation of input...

43
 / > < $ % +         are prohibited.
About Crestron e-Control®
1. The Crestron e-Control® page provides a variety of virtual keys to control the  
projector or adjust the projected pictures.  
i. These buttons function the same as the ones on the OSD menus or remote control.  
See  2. PICTURE menu on page 51 and Projector on page 7 for details. 
ii. To switch between input signals , click on your desired signal.
• The Menu button can also be used to go back to previous OSD menus, exit and save menu...

44
2. The tools page allows you to manage the projector, configure the LAN control  
settings and secure access of remote network operation on this projector. 
i. This section is only used with the  Crestron Control System. Please contact  
Creston or refer to its user  manual for setup information. 
ii. You can name the projector, keep track of its location and the person in charge of  
it. 
iii. You can adjust the  LAN Control Settings. 
iv. Once set, access to the remote network operation on this...

45
3. The info page displays the information and status of this projector. 
4. After pressing the button “Contact IT Help ”, the HELP DESK window will appear in  
the upper right corner of the screen. You  will be able to deliver messages to  
RoomView™ software administrators/users  who connect to the same local area  
network. 
For more information, visit  http://www.crestron.com & www.crestron.com/getroomview.  
**Crestron RoomView 
On the “Edit Room” page, enter the IP Address (or hostname) as shown...