ViewSonic Va703m4 Service Manual

							
Firmware Update Procedure   
 
1.  The monitor’s firmware update for VA703m/b have two method.   
1.1. Download the MCU IC  by the fire machine. This procedure is finished in  SMT. 
1.2. ISP Method. When the monitor’s BIOS  isn’t exist or firmware isn’t final program, this method Is worked by ISP 
Cord with monitor . 
2.  VA703m/b monitor upgrade firmware by ISP Cord.  
2.1. Equipment Needed 
-  USB cable for print port *1 
- VGA cable*1 
-  LPT cable (25pin)*1 
- AC  power cable*1 
- ISP  fire cord (the fixture is made in TE ) for firmware upgrade*1 
-  Power adapter for firmware upgrade (this adapter is made in TE)*1 
-  A computer with Windows  XP 
-  VA703m/b monitor ( no firmware) 
-  a additional monitor for system display 
- ISP & ISP3.0program 
  NOTE: 
The fixtures for firmware upgrade provide two diff erent methods to fire. Please check you monitor’s  Main board, 
refer to MCU-RSIC type and choose the method. 
Below form appear the relation between the  method  and  the MCU-RSIC type 
PIN1-2 CLOSED PIN2-3 CLOSED JUMPER 
REALTEK
M-STAR & NOVATEK ASIC
OTHER
MYSON MCU
B
A
METHOD
TEST PC
Fixture  ISP_CORDFixture   POWER_ADAPTER
LPT PORT
ViewSonic Corporation 28 Confidential - Do Not Copy   VA703b-4_VA703m-4  
						

							
LPT CableAC power Cable VGA Cable
USB FOR PRINT
ISP3.0  SOFT
 
2.2.  Setup Procedure  
2.2.1  Connect PO1 of ISP fixture with print port of computer by LPT cable 
2.2.2  Connect PO2 of ISP fixture with USB port of computer    by    USB cable 
2.2.3  Connect PO3 of ISP fixture with monitor VGA port by VGA cable 
2.2.4  Connect mouse, keyboard, AC power, monitor with computer 
2.2.5  Plug AC cable in power adapter AC jack   
2.2.6  Connect power adapter DC_OUTPUT port to main board DC_IN port 
2.2.7  Connect PO3 of ISP fixture with    VGA port of monitor’s main board by VGA cable 
ViewSonic Corporation  29 Confidential - Do Not Copy   VA703b-4_VA703m-4  
						

							
PO2 to USB cablePO1 to LPT cable
PO3 to VGA cable
jumper
AC JACK DC_IN port
VGA port 
  NOTE: 
Do STEP2.2.6 and STEP2.2.7 for monitor’s main board only. Monitor firmware upgrade will jump this step. 
 
ViewSonic Corporation 30  Confidential - Do Not Copy   VA703b-4_VA703m-4  
						

							
2.3. Soft install  
Install ISP3.0 program by selecting and clicking “ …\isp3.0\setup.exe”, press  “YES” or “NEXT” buttons 
until setup is complete. 
 
 
ViewSonic Corporation 31  Confidential - Do Not Copy   VA703b-4_VA703m-4  
						

							
ViewSonic Corporation 32Confidential - Do Not Copy  VA703b-4_VA703m-4  
						

							
ViewSonic Corporation 33Confidential - Do Not Copy  VA703b-4_VA703m-4  
						

							
Installation  will create a icon for ISP application  in “START MENU”\PROGRAM 
Press “finish” button exit setup
ViewSonic Corporation 34 Confidential - Do Not Copy   VA703b-4_VA703m-4  
						

							
 
 
STEP1: Choose the DCC written Program 
set up the DCC written fixture ,check whether the  connection between main board is in well 
condition ,see attached file 1.1&1.2 per the  product model ,choose the corresponding Model, DCC 
written process, the model mr171-AAA should apply the SIP Program 
ViewSonic Corporation 35  
Firmware and EDID upgrade/update Methods 
Confidential - Do Not Copy   VA703b-4_VA703m-4  
						

							
 
STEP2: Creat security file 
Choose the Tab create Security File  to enter next Dialogue Item 
 
ViewSonic Corporation
 36  Confidential - Do Not Copy   VA703b-4_VA703m-4  
						

							
STEP3: Input the related parameter, save them and take up the next step 
 
STEP4: Choose the Tab MTV TYPE Choose the MTV512M64 from the TAB ISP ITEMS 
 
DCC Written model Diagram Table as below 
ViewSonic Corporation 37  Confidential - Do Not Copy   VA703b-4_VA703m-4