ViewSonic Vt1602l Manual

							12
ButtonDescription
4 0~9, - 
number 
buttons Press the respective button to select a channel. 
After	you	input	the	channel	numbers,	press	
ENTER to direct to the channel immediately, or 
wait for 3 seconds to change automatically.
5 - VOL +
Press	to	adjust	the	volume.
6 FAV Press this button to show Favorite List and select 
your favorite channels that have already been 
stored.
j To preset favorite channels, set the Favorite 
option in the Channel menu (see page 16). 
7 ▲▼◄►/ 
ENTER 
buttons Press these buttons to navigate the OSD menus. 
•	
▲/▼	-	move	upward/downward	to	select	menu	
options.
•	 ◄/►	-	move	to	the	right/left	to	select	the	main	
menu	or	adjust	the	settings.
You	can	also	use	►	to	enter	the	corresponding	
submenu.
•  ENTER:	Confirm	the	selection	or	enter	the	
corresponding submenu. 
8 INPUT
Press to display the Source 
Select list and select the source 
with	▲/▼.	 
To	confirm	the	selection,	press	
ENTER.
9 PICTURE Press this button repeatedly to select the preset 
picture mode.  
Available	options:	Standard,	Movie,	User,	Power	
Saving, or Dynamic.
10 SOUND Press this button repeatedly to select the preset 
sound mode. 
Available	options:	Standard,	Soft,	User	or	
Dynamic.
11 MTS Press this button to choose the available sound 
output that is preset by TV broadcasting station. 
Available	options:	Mono,	Stereo,	or	SAP.
12 MUTE Press to turn off the sound. To restore the sound, 
press this button again, or press the  VOL+/- 
button.
1
2
4
12
11
15
16
13
17
18
19
5
6
7
8
9
10
3
20
14
PC
Media
Using the TV Features  
						

							13
ButtonDescription
13 RETURN Press to return to the previous channel.
14 C.C Press to select the Closed Caption menu in the 
TV	or	
AV	mode.	
15 ▼ CH ▲ Decrease or Increase the channel number
16 GUIDE Press to display the Electronic Program Guide 
(EPG). It contains the program information for 
the channel you’re watching.
17 EXIT Press to exit the OSD menu screen.
18 MENU
Press to turn the OSD (On-Screen Display) 
menu on.
19 ASPECT Press this button repeatedly to select the screen 
size.  
Available	options:	Normal,	Wide,	Cinema,	or	
Zoom or Full 100%.
* For Full 100% option, it is only available on 
HDMI/DVI input source.
20 SLEEP Press repeatedly to set the sleep timer. The TV 
will automatically turn off after a preset period of 
time.  
Available	options:	OFF,	15	min.,	30	min.,	60	
min., 90 min., or 120 min..
1
2
4
12
11
15
16
13
17
18
19
5
6
7
8
9
10
3
20
14
Using the TV Features  
						

							14
Operation
Turning the TV On and Off
Press 
 on the remote control.
You can also use the 
 key on the front side of the panel.
j If there is no input signal within 10 minutes, TV will be turned off 
automatically.
Initial Setup
If an antenna or cable (without a cable box) is connected to your 
TV’s	tuner,	you	will	need	to	go	through	an	INITIAL 	SETUP	process	
in order to watch the TV.  The setup wizard will automatically start 
when	you	first	turn	on	the	 TV.	
1.	Press	◄	or	►	button	to	select	the	 Menu Language preference. 
2.	Press	▲	or	▼	button	to	select	the	options	you	want	to	adjust	 and	Press	◄	or	►	button	to	change	its	value.			
3.	Press	◄	or	►	buttons	to	select	your	connection	type	between
	 	Air	(antenna)	or	Cable	and 	press	ENTER to scan for channels. 
4. The channel scan may take a while to complete, and after it is  done,	the	screen	will	return	to	the	first	found	channel.
Please Note:
j  The time setting on the TV will only keep accurate time if 
you do not unplug or turn off standby power from the TV.
j  Not	all	broadcasts	are	in	High	Definition	(HD).		Please	refer	to	
your local broadcasting stations for more information. 
j  The	HDTV’s	tuner	is	designed	for	HDTV	therefore	requires	a	
stronger signal than normal TVs.  If you cannot achieve that 
signal	level	with	your	antenna	or	cable,	your	HDTV	might	lose	
picture or sound. 
j  ViewSonic wants to help you save energy! This HDTV meets 
the ENERGY STAR® guidelines under the default picture 
setting called POWER SAVING.  Changing this setting or 
enabling other options will increase power consumption 
which could possibly exceed the guidelines of ENERGY STAR®. 
Using the TV Features  
						

							15
Changing Channels
1.	Using	Channel	ButtonsPress	▼CH▲	to	change	channels,	and	the	 TV	changes	the	
available	channels	in	sequence.
2.	Using	Number	Buttons (1)	 ATV
The	“-”	has	no	function	in	 ATV	mode.	Directly	press	the	number	
buttons to select channels.
(2) DTV
Use	“-”	to	select	the	sub	channel	in	DTV.
For example: Your sub channel number is 80-3.
Press	8	→	press	0	→	press	“-”	→	press	3.
j Return to the previous channel, press  RETURN.
Adjusting the Volume
Press VOL +/-	to	adjust	volume.
To turn off the volume, press MUTE.
To restore volume, press  MUTE again, or press VOL +/- directly.
Viewing the Displayed Information
To display the current information of the LCD TV:
Press INFO, and the current state will be displayed on the screen. 
(It shows all or some of the information about Input, Channel, 
Resolution,	 Audio	Type,	etc.,	depending	on	the	input	source)
Using the TV Features  
						

							16
Selecting the Input Source
To select the TV or other external input sources connected to the TV:
1. Press INPUT on the remote control.
2.	Press	▲	or	▼	to	select	the	desired	input	source.
3.	 To	confirm	the	selection,	press  ENTER.
Favorite Channel Setting
To set your favorite channel into memory:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	 CHANNEL menu, then press ENTER to 
enter the menu. 
3.	Press	▲	or	▼to	select	 Favorite,	then	press	►	to	enter.	
4.	Press	▲	or	▼	to	select	the	channel	you	want	to	add	into	your	 favorite channel.
5.	Press	◄	or	►	to	highlight	Favorite , and press ENTER	to	confirm	 your selection.
6. To cancel the selection, press  ENTER again on the selected .
7. Press EXIT to exit the menu. j To view your favorite channels, press  FAV to display Favorite 
List and select your favorite channels that have already been 
stored.
Customizing Channel Label
To customize a name for the current channel:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	 CHANNEL menu, then press ENTER to 
enter the menu. 
3.	Press	▲	or	▼to	select	 Channel Label,	then	press	►	to	enter	
Channel Label  submenu.
4.	Press	◄	or	►	to	highlight	Label check box, and press ENTER to  start editing the label.
5.	Press	ENTER	to	confirm.
6. Press EXIT to exit the menu.
PC
Media
Using the TV Features  
						

							17
Using the Parent Controls
With	PARENT	CONTROL,	you	can	block	television	and	movie	programming	based	on	Movie	and	
TV ratings. 
Password	is	required	to	access	the	PARENTAL 	CONTROL	menu.	The	default	is	“0000”.
To	manage	programs	using	the	US	Ratings	system:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	 Lock menu, then press ENTER to  
enter the menu. 
3. Enter the password. 
4.	Press	▲	or	▼to	select	 System Lock,	then	press	◄	or	►	to		
select On.
5.	Press	▲	or	▼	to	select	 US Rating,	then	press	►	to	enter	the	  
US	rating	submenu.
Movie Rating
1.	Press	▲	or	▼	to	select	 MPAA,	then	press	►	to	enter	its	
submenu.
2.	Press	◄	or	►	to	select	your	desired	MPAA 	ratings	level.
The	MPAA 	ratings	level	are	defined	as	following:
•	 G (general audience)
•	 PG (parental guidance suggested)
•	 PG-13 (recommended for children 14 years of ageor older)
•	 R (mature audience)
•	 NC-17	(no	one	under	17	years	of	age)
•	 X (adult audience only)
3. Press ENTER	to	lock	/	unlock	your	selection.
4. Press EXIT to exit the menu.
Using the TV Features  
						

							18
TV Rating
1.	Press	▲	or	▼	to	select	
TV Rating,	then	press	►	to	enter	its	
submenu.
2.	Press	▲	or	▼	to	select	your	desired	 TV	ratings	level	and	press	
◄	or	►	to	select	the	desired	content	check	box.
The	 TV	ratings	level	and	content	are	defined	as	following:
TV ratings level TV ratings content
•	 TV-Y (all children)
•	 TV-Y7 (older children)
•	 TV-G (general audience)
•	 TV-PG (guidance suggested)
•	 TV-14 (strongly cautioned)
•	 TV-MA 	(mature	audience) •	
D (suggestive dialog)
•	 L (adult language)
•	 S (sexual situations)
•	 V (violence)
•	 FV (fantasy violence)
3. Press ENTER	to	lock		/	unlock		your	selection.
4. Press EXIT to exit the menu.
To manage programs using the Canada Ratings system:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	 Lock menu, then press ENTER to enter 
the menu. 
3. Enter the password.
4.	Press	▲	or	▼to	select	 System Lock,	then	press	◄	or	►	to		
select On.
5.	Press	▲	or	▼	to	select	 Canada Rating,	then	press	►	to	enter	
the	Canada	English	/	Canada	French.
Using the TV Features  
						

							19
Canada English 
1.	Press	▲	or	▼	to	select	
Canada English,	then	press	►	to	enter.
2.	Press	◄	or	►	to	select	your	desired	Canadian	English	rating	 level.
The	Canadian	English	rating	levels	are	defined	as	following:
•	C (children)
•	 C8+ (children eight years and older)
•	 G (general programming, suit able for all audiences)
•	 PG (parental guidance)
•	 14+ (viewers and older)
•	 18+ (adult programming)
3. Press ENTER	to	lock	/	unlock	your	selection.
4. Press EXIT to exit the menu.
Canada French 
1.	Press	▲	or	▼	to	select	 Canada French ,	then	press	►	to	enter.
2.	Press	◄	or	►	to	select	your	desired	Canadian	French	rating	 level.
The	Canadian	French	rating	levels	are	defined	as	following:
•	G (general)
•	 8 ans+ (children eight years and older)
•	 13 ans+ (not appropriate for children of less than 13 years)
•	 16 ans+ (not appropriate for children of less than 16 years)
•	 18 ans+ (reserved to adults)
3. Press ENTER	to	lock		/	unlock	your	selection.
4. Press EXIT to exit the menu.
Using the TV Features  
						

							20
Changing Password
To change a new password:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	Lock	menu,	then	press	ENTER	to	enter	
the menu. 
3. Enter the password. 
4.	Press	▲	or	▼to	select	 Change Password,	then	press	►	to	enter	
its submenu.
5.	Enter	the	old	password	on	 Old PIN.
6. Enter your new password on  New PIN.
7. Enter your new password again on  Confirm.
The screen will return to the  Lock menu. This indicates the 
password has been changed.
8. Press EXIT to exit the menu.
Blocking Selected Input Source
To block the selected input source:
1. Press MENU to display the OSD main menu.
2.	Press	◄	or	►	to	select	 Lock menu, then press ENTER to enter 
the menu. 
3. Enter the password. (Default password is 0000) 
4.	Press	▲	or	▼	to	select	 Input Block, then press ENTER to enter 
its submenu.
5.	Press	▲	or	▼	to	select	the	input	source	that	you	want	to	block.
6. Press ENTER	to	confirm. Press	◄	or	►	to	select	(Unblock/Block).
7. Press EXIT to exit the menu.
Using the TV Features  
						

							21
Customizing PC Display
Connect the PC and your TV using the VGA cable. See “Personal
Computer” on page 10.
1. Press INPUT  to display the Source Select menu.
2. Press ▲ or ▼ to select PC, then press ENTER to confirm the 
setting.
3. Press MENU to display the OSD main menu.
4. Press ◄ or ► to select  Setup menu, then press ENTER to enter 
the menu. 
5. Press ▲ or ▼ to select  PC Settings, then press ENTER to enter 
its submenu.
6. Press ▲ or ▼ to select  H-Pos, V-Pos, Clock,Phase or Auto, 
and press ◄ or ► to adjust the setting.
7. Press EXIT to exit the menu.
Using USB Function
Your TV is equipped with a USB connector that enables you to view photos or l\
isten to music stored 
on a USB storage device.
j USB only supports JPEG and MP3 files.
Multimedia support format
Multimedia 
Categories File 
ExtensionDecoder
Notes
Music *.mp3 MPEG1 Audio  LAYERIII 
 
(Not corresponding MP3 
Pro) Sampling Frequency [KHz] : 32 / 44.1 / 48
Bit Rate [kbit/s]: 32 / 40 / 48 / 56 / 64 / 80 / 
96 / 112 / 128 / 160 / 192 / 224 / 256 / 320 
/ VBR
Photo *.jpgBaseline Horizontal Max: less than 5000
Vertical Max: less than 5000
Horizontal Min: greater than 8
Vertical Min: greater than 8
1. Plug a USB device to the USB connector on the rear side of the TV.
2. Press INPUT  to display the Source Select menu.
3. Press ▲ or ▼ to select  Media, then press ENTER to confirm the setting. The USB menu appears 
on the screen.
PC S eetting s
Photo
Music
4. Press ◄ or ► to select the menu item, then press  ENTER. 
5. Press EXIT to return to the previous screen.
Using the TV Features