Vivitar V3625 User Manual

 40
E
 DPOF
DPOF allows you to embed printing information on your memory card. Using DPOF
you can select an image to be printed and then specify how many prints t\
o you
would like.  Take your memory card to a DPOF enabled printer that accepts SD
memory cards. The DPOF/card-compatible printer will read the embedded infor-
mation on the memory card and print your images as specified.
To use DPOF, first press the  OK button to enter the DPOF sub-menu. Use the 
/ button to set the values for each field and...

 41
E
Movie menu
To adjust movie menu setting, press the  button in the  mode and navigate to
the option you wish to set by using the 
/  button.
 LCD BRIGHTNESS
This option adjusts the brightness of the LCD
monitor. Refer to LCD BRIGHTNESS in Record
menu for detailed information.
 EXIT
This option exits the movie menu and then returns to the  mode. Press the OK
button to exit. You can also press the  button again to exit.  

 42
E
Setup menu
Select your general camera preferences  in the SET-UP mode. Switch the mode
dial to the SET-UP mode and navigate to the option you wish to configure by
using the 
/  button.
 DATE/TIME
Press the OK button to enter the DATE/TIME
sub-menu. Refer to section in this manual titled
SETTING THE DATE AND TIME for further detail.
After removing the batteries from the camera,
the date and time will return to the default
setting. If this happens, reset the date and time
when using the camera....

 43
E
 VIDEO MODE
This option allows you to view your images on a TV. Connect the camera to your
TV using the video cable. Then select the video output format by using the / 
button and press the  OK  button.
[NTSC] : select this format when located in the U.S.A., Canada, Japan, Korea,
  Taiwan, Central America, Mexico, etc.
[PAL]: select this format when located in Australia, Austria, Belgium, China,
  Denmark, Finland, Germany, Great Britain, Holland, Italy, Kuwait,
  Malaysia, New Zealand, Singapore,...

 44
E
 RESET TO DEFAULT
If you wish to restore all camera settings to their original status, select [YES] by
using the  
/  button and then press the OK button.
The following table shows the default setting for each item.
Item Description
Image resolution 1600x1200 pixels
Image quality Fine
Flash Auto
Quick view Off
White balance Auto
EV compensation 0.0
Slide show delay 4 seconds
Auto power off Battery: 3 minutes
AC power adapter: 30 minutes
Sound On
Digital Zoom Off  

 45
E
USB Cable
Computer
Computer
TV
PCMCIA Adapter
SD Card Reader SD Card Reader
VIDEO Cable
SD Memory Card
Printer
CONNECTING THE CAMERA TO OTHER DEVICES  

 46
E
CAMERA SPECIFICATIONS
Item Description
Sensor Approx. 2.1megapixels
1/3.2 CCD
Color depth 24 bits (8 bits x 3 colors)
Resolution 1600x1200 pixels
800x600 pixels
LCD 1.6 color TFT LCD
Self-timer 10 seconds delay
Shutter speed 1/10 sec.~1/500 sec.
Zoom 2 x digital zoom
Capture modes Still photographs or video recording
Memory type 8 MB internal memory
SD memory card (optional) (up to 128MB capacity)
Memory capacity Storage for an 8MB SD memory card at 1600x1200 pixels:Fine: 10 images; Normal: 15...