Vivitek D3355 User Manual

							–21–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r – –
– UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
  
 
 
Picture Menu 
 
Press the Menu 
button to open the OSD menu. Press the cursor button to move to the Picture 
menu. Press the cursor button to move up and down in the Picture menu. Press to change 
values
 for settings.  
   
ITEM 
 
DESCRIPTION 
 
DEFAULT 
 
User mode 
 
Press the cursor button to choose from three user modes: Memory 1; 
Memory
 2; and Memory 3. 
 
Any settings you change in the Picture menu are saved in Memory that you 
have
 selected. 
 
— 
 
Brightness 
 
Press the cursor button to adjust the brightness. (Range: 0 – 100) 
 
50 
 
Contrast 
 
Press the cursor button to adjust the contrast. (Range: 0 – 100) 
 
50 
 
Sharpness 
 
Press the cursor button to adjust the display sharpness (Range: 0 – 100) 
 
50 
 
Saturation 
 
Press the cursor button to adjust the video saturation. (Range: 0 – 100) 
 
50 
 
Tint 
 
Press the cursor button to adjust the video tint/hue. (Range: 0 – 100) 
 
50 
 
Gamma 
 
Press the cursor button to adjust the gamma correction of the display.  
Input Gamma Brightness 
PC 2.2 High  
MAC 1.8 High  
Video 2.4 Low  
Chart 2.2 Low  
B&W 2.4 High 
 PC: 
Computer, 
5BC, 
Digital 
 
Video: 
Video, 
S-Video, 
Component, 
HDMI
  
						

							–22–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r
— —
—
UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
     
ITEM 
 
DESCRIPTION 
 
DEFAULT 
 
Color Temp 
 
Press the cursor button to adjust the color temperature. 
Range:
 
High brightness mode   6400K, CT x = 0.3; CT y = 0.33 
Preset mode From 5000K to 12000K (increments of 100K) 
Custom
 mode Will update when hardware is available. 
High- 
brightness
 
 
Color Space 
 
Press the cursor button to adjust the color space. 
(Range: RGB – YCbCr – YpbPr – SMPTE240M – Blue only) 
 
RGB: 
Computer,
 
5BNC, 
DVI
 
 
YCbCr: 
DVI
 
 
Video format 
 
Press the cursor button to adjust the video format. 
(Range: Auto – NTSC 50Hz 3.58MHz – NTSC 60Hz 3.58MHz – NTSC 
60Hz 4.43MHz – PAL 50Hz 4.43MHz – PAL 60Hz 3.58MHz – PAL 50Hz 
3.58MHz – PAL 60Hz 4.43MHz – SECAM50Hz 4.43MHz) 
 
Auto 
 
Color balance 
Red/Green/ 
Blue
 
 
Press the cursor button to adjust the red/green/blue color balance. 
(Range:
 0 – 100) 
 
50 
 
Fleshtone 
 
Skin colors can become corrupted during the broadcast process. Use this set- 
ting
 to correct skin color as desired. 
 
Press the cursor button to adjust the Fleshtone. (Range: 0 – 100) 
 
50 
 
Film mode 
 
Film is a digital video recording with the original recording encoded at 24 
fps (frame per second, i.e., full-motion video). The projector can convert 
film source to progressive video at 60 fps with NTSC and PAL60Hz or at 50 
fps with PAL50Hz and SECAM. The result is high-definition play back. 
 
Press the cursor button to enable or disable Film mode. 
 
On 
 
3D Comb 
Filter 
 
This technique provides near perfect Y/C separation for still images. 
 
Press the cursor button to enable or disable 3D Comb Filter. 
 
On 
 
White 
peaking
 
 
White Peaking increases the output in the brightest whites without changing 
the
 blacks and dark grays. It crushes the whites slightly, but it does not ap- pear
to clip them or seriously obscure white detail. If you prefer a stronger 
image, adjust toward the maximum setting. For a smoother, more natural im- 
age,
 adjust toward the minimum setting. 
 
Press the cursor button to adjust the White Peaking. (Range: 0 – 10) 
 
10 
 
Reset 
 
Resets all Picture settings to default values 
 
—  
						

							–23–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r – –
– UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
    
P   icture Menu Functions Available for Connected Source  
Function  Computer  RGBHV  WPC  Digital  Component  Composite  S-Video  HDMI 
Brightness x x x x x x x x 
Contrast x x x x x x x x 
Sharpness x x x x x x x x 
Saturation x x  x x x x x 
Tint x x  x x x x x 
Gamma x x x x x x x x 
Color Temp x x x x x x x x 
CT x value x x x x x x x x 
CT y value x x x x x x x x 
Color space x x  x x    
Video format      x x  
Color Balance 
Red/Green/Blue 
 
x 
 
x 
 
x 
 
x 
 
x 
 
x 
 
x 
 
x 
Flesh tone correction     x x x x 
Film mode x x x x x x x x 
3D Comb Filter      x   
White Peaking x x x x x x x x 
Reset x x x x x x x x 
 x = available to video source  
						

							–24–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r
— —
—
UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
  
 
 
Advance Menu 
 
Press the Menu 
button to open the OSD menu. Press the cursor button to move to the Advance 
menu. Press the cursor button to move up and down in the Advance menu. Press to change 
values
 for settings.  
   
ITEM 
 
DESCRIPTION 
 
DEFAULT 
 
Frequency 
 
Press the cursor button to adjust the A/D sampling number. 
(Range:
 0° - 100°) 
 
Auto 
detected
 
 
Phase 
 
Press the cursor button to adjust the A/D sampling phase. 
(Range:
 0° - 100°) 
 
Auto 
detected
 
 
H size 
 
Press the cursor button to adjust the size of the display horizontally. 
(Range:
 0 – 100) 
 
50 
 
V size 
 
Press the cursor button to adjust the size of the display vertically. 
(Range:
 0 – 100) 
 
50 
 
Overscan 
 
Use overscan to trim an unwanted blank border from the onscreen image. 
 
Press the cursor button to adjust video overscan. 
(Range:
 0% – 10%) 
 
3%: 
composite, 
S-video, 
component
 
 
0%: 
5BNC, DVI, 
HDMI, 
Wireless
 
 
Horizontal 
Position 
 
Press the cursor button to move the image left or right. (Range: 0 – 100) 
 
50 
 
Vertical 
Position 
 
Press the cursor button to move the image up or down. (Range: 0 – 100) 
 
50  
						

							–25–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r – –
– UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
     
ITEM 
 
DESCRIPTION 
 
DEFAULT 
 
Aspect Ratio 
 
Press the cursor button to adjust the video aspect ratio. 
1:1 – Native size, no scaling 
4:3 – Standard TV format 
16:9 – High Definition TV (HDTV) format 
2.35:1 – Anamorphic format (Anamorphic format maximizes the resolution on 
wide screen TVs as well as standard TVs that support the anamorphic mode.) 
 
4:3 
 
Blank color 
 
Press the cursor button to select a background color for the blank screen 
instead
 of the default logo. 
 
Logo 
 
Auto sync 
 
Press Enter to auto tune the timing phase, frequency, and horizontal/vertical 
position.
 
 
— 
 
Auto search 
 
Press the cursor button to enable or disable auto search for connected 
devices.
 When disabled, you have to manually select the source. 
 
On 
 
Freeze 
fram
e 
 
Freeze frame allows you to pause onscreen video. 
 
Press the cursor button to enable or disable Freeze frame. 
 
On 
 
Video AGC 
 
Press the cursor button to enable or disable Video AGC. When enabled, 
the
 automatic gain control for the video source is auto adjusted to match the 
video
 standard. 
 
On 
 
Black level 
 
Press the cursor button to enable or disable the 7.5 setup for NTSC. 
(Range:
 On = 7.5 IRE; Off = 0 IRE) 
 
NTSC uses 7.5 IRE except for Japan which uses 0 IRE. Set Black level to 
Off for use in Japan only. 
 
On 
 
Digital 
zoom
 
 
Press the cursor button to adjust the digital zoom. (Range: 0 – 23) 
Note: Digital zoom is not available when you are using PIP. 
 
0 
 
Reset 
 
Resets all items in the Advance menu to default values 
 
— 
 
A   dvance Menu Functions Available for Connected SourceU  
Function  Computer  RGBHV  WPC  Digital  Component  Composite  S-Video  HDMI 
Phase x x x  x    
Frequency x x x  x    
H position x x x  x x x  
V position x x x  x x x  
Aspect Ratio x x x x x x x x 
H size x x x x x x x x 
V size x x x x x x x x  
						

							–26–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r
— —
—
UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
    
Function  Computer  RGBHV  WPC  Digital  Component  Composite  S-Video  HDMI 
Overscan  x  x x x x x 
Auto sync x x x         
Auto search x x x x x x x x 
Freeze frame x x x x x x x x 
Blank color x x x x x x x x 
Video AGC      x x  
Black level      x x  
Digital zoom x x x x x x x x 
Reset x x x x x x x x 
 x = available to video source  
						

							–27–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r – –
– UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
  
 
 
Setup Menu 
 
Press the Menu 
button to open the Main menu. Press the cursor button to move to the Setup 
menu. Press the cursor button to move up and down in the Setup menu. Press to change 
values
 for settings. 
   
ITEM DESCRIPTION DEFAULT   
Language Press the cursor button to choose from the following languages: 
English, French, German, Italian, Spanish, Swedish, Chinese Simplified, 
Chinese
 Traditional, Japanese, Korean, Portuguese, and Russian. 
English 
 
Projection Press the cursor button to choose from four projection methods: 
 
     Desktop mount, front of screen 
 
     Desktop mount, rear of screen 
 
     Ceiling mount, front of screen 
 
Ceiling mount, rear of screen 
Desktop 
front 
 
 
Lens shift Press Enter to activate lens shift. The following screen appears. — 
 
  
Press the up/down/left/right cursor buttons to shift the lens vertically and 
horizontally.
 
 
Motorized 
focus 
Press the cursor button to adjust the motorized focus. — 
  
						

							–28–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r
— —
—
UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
     
ITEM 
 
DESCRIPTION 
 
DEFAULT 
 
Motorized 
zoom
 
 
Press the cursor button to adjust the motorized zoom. 
 
— 
 
H keystone 
 
Press the cursor button to correct horizontal distortion of the projected 
image.
 (Range: -100 – +100) 
 
0 
 
V keystone 
 
Press the cursor button to correct vertical distortion of the projected 
image.
 (Range: -100 – +100) 
 
0 
 
Lamp control—Press the cursor button to display the hidden Lamp control submenu. 
 
Mode 
 
Press the cursor button to toggle between Dual lamp and Single lamp. 
Dual
 lamp uses both lamps in the projector. Single lamp uses the lamp 
which has been used the least. 
 
Dual lamp 
 
Lamp 1 
 
Press the cursor button to toggle between ECO mode and Normal 
mode. Eco mode uses less power and extends lamp life, but decreases lamp 
brightness.
 
 
Normal 
 
Lamp 2 
 
Press the cursor button to toggle between ECO mode and Normal 
mode. Eco mode uses less power and extends lamp life, but decreases lamp 
brightness.
 
 
Normal 
 
OSD settings—Press the cursor button to display the hidden OSD settings submenu. 
 
Position 
 
Press the cursor button to position the OSD on screen. 
(Range:
 Left – Right – Center – Down – Up) 
 
Center 
 
Transparency Press the cursor button to set menu screen translucency. 
(Range:
 0 – 100) 
50 
 
Timeout(sec) 
 
Press the cursor button to determine the timeout delay of the OSD. 
(Range:
 Always on – 100 seconds) 
 
20 
 
Message 
 
Press the cursor button to show or hide the OSD information screen in 
the
 bottom-right corner of the screen. 
 
On 
 
Menu type 
 
Press the cursor button to toggle between Expert mode and Normal 
mode. In Expert mode all settings are available in the OSD. 
 
Expert 
 
Logo settings—Press the cursor button to display the hidden Logo settings submenu. 
 
Logo display 
 
Press to enable or disable if the logo displays when the projector 
starts,
 and when no source is detected. (Range: On—Off) 
 
On 
 
Logo select 
 
Press to select a different image for the logo display. To use this func- 
tion
 you must capture an image with the following “Logo capture” 
function. 
 
Default 
(preset 
image)
  
						

							–29–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r – –
– UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
     
ITEM 
 
DESCRIPTION 
 
DEFAULT 
 
Logo capture 
 
Press Enter to capture the current display image as the logo. The following 
screen
 appears:   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Logo capture is only available for Computer, RGBHV, and DVI input. 
 
— 
 
Fan control 
 
Press the cursor button to toggle between Normal and High altitude 
fan
 speeds. 
 
Set Fan control to High in altitudes over 3,000 meters (10,000 feet). 
 
Normal 
 
Reset 
 
Resets all items in the Setup menu to default values  
 
S   etup Menu Functions Available for Connected Source  
Function  Computer  RGBHV  WPC  Digital  Component  Composite  S-Video  HDMI 
Language x x x x x x x x 
Projection x x x x x x x x 
Lens shift x x x x x x x x 
Motorized focus x x x x x x x x 
Motorized zoom x x x x x x x x 
H keystone x x x x x x x x 
V keystone x x x x x x x x 
Lamp mode x x x x x x x x 
Lamp mode 
(Lamp1) 
x x x x x x x x 
Lamp mode 
(Lamp2) 
x x x X x x x x 
OSD position x x x x x x x x 
OSD translucency x x x x x x x x 
OSD timeout x x x x x x x x 
Menu type x x x x x x x x  
						

							–30–
D D
DLLLPPP PPPr r
r
o o
ojjjeeec c
c
ttto o
o
r r
r
— —
—
UUUs s
seeer r
r
’’’s s
s M M
M
a a
a
n n
n
u u
u
a a
al l
l
   
    
Function  Computer  RGBHV  WPC  Digital  Component  Composite  S-Video  HDMI 
Logo display x x x x x x x x 
Logo select x x x x x x x x 
Logo capture x x x x x x x x 
Fan control x x x x x x x x 
Reset x x x x x x x x 
 x = available to video source