Vivitek D551 User Manual

DLP Projector—User’s Manual 
Adjusting the Projector Level 
Take note of the following when setting up the projector: 
  The projector table or stand should be level and sturdy. 
   Position the projector so that it is perpendicular to the screen. 
   Ensure the cables are in a safe location. You could trip over them.  
 
To adjust the angle of the picture, turn the tilt- adjuster right or left until the desired angle has 
been achieved. 
 
 
 
 
–  13  –  

DLP Projector—User’s Manual 
Adjusting the Zoom, Focus and Keystone 
1.  Use the Image-zoom   
control (on the projector 
only) to resize the 
projected image and 
screen size 
. 
2.  Use the  Image-focus   
control (on the projector 
only) to sharpen the 
projected image 
. 
 
3.  Use the  KEYSTONE  
buttons the remote control 
to correct image-trapezoid 
(wider top or bottom) 
effect. 
 
4.  The keystone control 
appears on the display. 
Adjusting the Volume 
 
1.  Press the  Volume +/-  
buttons on...

DLP Projector—User’s Manual 
– 15  – 
ON-SCREEN DISPLAY (OSD) MENU SETTINGS 
OSD Menu Controls 
The projector has an OSD that lets you ma ke image adjustments and change various settings.  
Navigating the OSD 
You can use the remote contro l cursor buttons to navigate and make changes to the OSD.  
2
MenuPower
Vo l u m e
Freeze
Auto Source
1
1
3
4 5
1
3
2
14
5
Mute
 
1.  To enter the OSD, press the  MENU button.  
2.  There are three menus.  Press the cursor ◄►  button 
to move through the menus.  
3....

DLP Projector—User’s Manual 
Setting the OSD Language 
Set the OSD language to your preference before continuing. 
1.  Press the  MENU button. Press the cursor  ◄► button to navigate to  Settings 1. Press the cursor 
▲▼  button to move to the Advanced  1  menu. 
 
2.   Press  (Enter) /  ► to enter the  Advanced 1  sub menu. Press the cursor ▲▼  button until 
Language  is highlighted.  
 
3.  Press the cursor button until the language you want is highlighted.  
4.   Press the  MENU button four times to...

DLP Projector—User’s Manual 
OSD Menu Overview 
Use the following illustration to quickly find a setting or determine the range for a setting. 
Image
Settings 1
Off, OnBlank, Red, Green, Blue, WhiteOff, On
Off, On3D3D Sync Invert3D Format
HueSaturation
English, Français, Deutsch, Español, Português, 簡体中文,  繁體中文, Italiano, Norsk, 
Svenska, Nederlands,  Русский, Polski, Suomi,  Ελληνικά, 한국어, Magyar,  Čeština,  اﻟﻌﺮﺑﻴﺔ, 
Türkçe, Vi ệt,  日本語 , ไทย ,  ﻓﺎرﺳﯽ,  תירבע
Off, On
Gain
1.8, 2.0, 2.2, 2.4, B&W,...

DLP Projector—User’s Manual 
Image Menu  
Attention !   
All of display mode parameters when changed will be saved to user mode.  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Image 
Menu. Press the cursor  ▲▼ button to move up and down in the  Image menu. Press  ◄► to enter 
and change values for settings. 
 
ITEM DESCRIPTION 
Display Mode  Press the cursor ◄► button to enter and set the Display Mode.  
Brightness  Press the cursor ◄► button to enter and...

DLP Projector—User’s Manual 
Computer Menu 
Press the MENU button to open the  OSD menu. Press  ◄► to move to the  Image menu. Press  ▲▼ 
to move to the  Computer menu and then press  Enter or ►. Press  ▲▼ to move up and down in the 
Computer  menu. 
 
ITEM DESCRIPTION 
Horizontal Position  Press the cursor ◄► button to enter and adjust the display position to left or right.  
Vertical Position  Press the cursor ◄► button to enter and adjust the display position to up or down.  
Frequency  Press the...

DLP Projector—User’s Manual 
Advanced Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Advanced menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Advanced  menu. 
 
ITEM DESCRIPTION 
Brilliant Color  Press the cursor ◄► button to enter and adjust the Brilliant Color value. 
Sharpness  Press the cursor ◄► button to enter and adjust the displaySharpness. 
Gamma  Press the cursor ◄► button to enter and adjust the gamma...

DLP Projector—User’s Manual 
Color Manager 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Image menu. Press  ▼▲ 
to move to the  Color Manager  menu and then press  Enter or ►. Press  ▼▲ to move up and down in 
the  Color Manager  menu.  
 
ITEM DESCRIPTION 
Red  Select to enter the Red Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain. 
Green  Select to enter the Green Color Manager.  
Press the 
◄► buttons to adjust the Hue, Saturation, and Gain....

DLP Projector—User’s Manual 
Settings 1 Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
Settings 1  menu. Press the cursor  ▲▼ button to move up and down in the  Settings 1 menu. Press 
◄►  to
 enter and change values for settings. 
 
ITEM DESCRIPTION 
Source  Press the cursor ◄►
 button to enter the Source menu. Reference input Source select 
(IR / Keypad). 
Projection  Press the cursor ◄► button to enter and choose from four projection methods: 
Aspect...