Vivitek D551 User Manual

							DLP Projector—User’s Manual 
Audio 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press  ▼
▲ to move to the  Audio menu and then press  Enter or ►. Press  ▼▲ to move up and down in the 
Audio menu. 
 
ITEM DESCRIPTION 
Volume Press  the ◄►  buttons to enter and adjust the audio volume.  
Mute Press  the ◄►  buttons to enter and turn on or off the speaker. 
 
– 23  –  
						

							DLP Projector—User’s Manual 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press  ▲
▼ to move to the  Advanced 1 menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced 1  menu. Press  ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄► button to enter and select a different localization Menu. 
Security Lock   Press the cursor ◄► button to enter and enable or disable security lock function. 
Blank Screen  Press the cursor ◄► button to enter and select different color to blank the screen. 
Splash Logo  Press the cursor ◄► button t enter and o select splash logo on or off. 
Closed Captioning  Press the ◄► buttons to enter and enable or disable Closed Captioning 
Keypad Lock  Press the cursor ◄► button to enter and enable or disable keys can be work on keypad. 
3D Setting  Press Enter/ ► to enter the 3D menu. See page  25 for more information on  3D Setting. 
Note:  
To enjoy the 3D function, first  enable the Play Movie in 3D setting  found in your DVD device under the 
3D Disc Menu. 
 
— 24 —  
						

							DLP Projector—User’s Manual 
3D Setting 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to enter and select different 3D mode. 
3D Sync Invert  Press the cursor ◄► button to enter and enable or disable 3D Sync Invert. 
3D Format  Press the cursor ◄► button to enter and enable or disable different 3D Format.  
 
Note: 
1.  The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting. 
2.  When the projector is connected to an appropria te 3D source, the 3D OSD menu item is enabled for 
selection. 
3.  Use 3D glasses to view a 3D image. 
4.  You need 3D content from a 3D DVD or 3D media file. 
5.  You need to enable the 3D source (some 3D DVD  content may have a 3D on-off selection feature). 
6.  You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a 
driver on your PC and connect a USB emitter. 
7.  The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8.  Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions.  Please follow the configuration 
instructions that come with your glasses to finish the setup process. 
 
Note:  
Since different types of glass (D LP link or IR shutter glass) have their own setting instructions, 
Please follow the guide to finish the setup process. 
– 25  –  
						

							DLP Projector—User’s Manual 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 1 menu. Press  ▲
▼ to move to the  Advanced 2 menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced 2  menu. Press  ◄► to enter and change values for setting. 
 
ITEM DESCRIPTION 
Test Pattern  Press the cursor ◄► button to enter and select internal test pattern. 
H Image Shift  Press the cursor ◄► button to enter and select H Image Shift. 
V Image Shift  Press the cursor ◄► button to enter and select V Image Shift. 
 
— 26 —  
						

							DLP Projector—User’s Manual 
Settings 2 Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the 
Settings 2  menu. Press the cursor  ▲▼ button to move up and down in the  Settings 2 menu.  
 
ITEM DESCRIPTION 
Auto Source  Press the cursor ◄► button to enter and enable or disa ble automatic source detection.  
No Singal Power Off 
(min.) Press the cursor ◄►
 button to enter and enable or disabl e automatic shutdown of lamp when 
no signal.  
Auto Power On  Press the cursor 
◄► button to enter and enable or disable automatic power On when AC power is 
supplied. 
Lamp Mode  Press the cursor ◄►
 button to enter and select the lamp mode for higher brightness or lower 
brightness to save lamp life. 
Reset All  Press  (Enter) / ► to reset all settings to default values. 
Status Press  (Enter) /  ►
 to enter the Status menu. See page 
28 for more information on Status. 
Advanced 1  Press  (Enter) / ► to enter the Advanced 1 menu. See  Advanced 1 Feature on page 29. 
Advanced 2  Press  (Enter) / ► to enter the Advanced 2 menu. See  Advanced 2 Feature on page 31. 
– 27  –  
						

							DLP Projector—User’s Manual 
Status 
Press the cursor ▲▼ button to move up and down in the  Settings 2 menu. Select the Status menu 
and press  Enter or ► to enter.
 
 
ITEM DESCRIPTION 
Active Source  Display the activated source. 
Video Information  Displays resolution/video information for RGB source and color standard for Video source. 
Lamp Hours  Lamp hour used information is displayed. ( Std. and Boost ) 
 
— 28 —  
						

							DLP Projector—User’s Manual 
Advanced 1 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 2 menu. Press  ▲
▼ to move to the  Advanced 1 menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced 1  menu. Press  ◄► to
 enter and change values for setting. 
 
ITEM DESCRIPTION 
Menu Position  Press ◄► button to enter and select different OSD location. 
Translucent Menu  Press ◄► button to enter and select OSD background translucent level.  
Low Power Mode  Press ◄► to enter and turn Low Power Mode on or off. 
Fan Speed  Press the cursor ◄►
 button to enter and toggle between Normal and High fan speeds.  
Note : We recommend selecting high speed in high temperatures, high humidity, or high 
altitude (higher than 1500m/4921ft) areas. 
Lamp Hour Reset  After replacing the lamp, this item should be reset. See page 
30 for more information on Lamp 
Ho
ur Reset . 
Projector ID   Press the cursor ◄► button to enter and adjust a two digit projector ID from 0 through 98. 
 
– 29  –  
						

							DLP Projector—User’s Manual 
Lamp Hour Reset 
 
Please refer to Resetting the Lamp  on page 36 to reset the lamp hour counter. 
 
—  30 —  
						

							DLP Projector—User’s Manual 
Advanced 2 Feature 
Press the Menu button to open the OSD menu. Press  ◄► to move to the  Settings 2 menu. Press  ▲
▼ to move to the  Advanced 2 menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced 2  menu. Press  ◄► to
 enter and change values for setting. 
 
ITEM DESCRIPTION 
Sleep Timer  Press the cursor ◄►
 buttons to enter and set Sleep timer. The projector automatically turns off 
after the preset period of time. 
Source Filter  Press Enter/ 
► to enter the Source Filter menu. See page  32 for more information on  Source 
Filter . 
–  31  –  
						

							DLP Projector—User’s Manual 
Source Filter 
Press the ENTER button to enter the  Source Filter sub menu. 
 
ITEM DESCRIPTION 
VGA1 Press  the ◄►  buttons to enter and enable or disable the VGA1 source. 
VGA2 (*)  Press the ◄► buttons to enter and enable or disable the VGA2 source. 
Composite Video (*)  Press the ◄► buttons to enter and enable or disable the Composite Video source. 
S-Video (*)  Press the ◄► buttons to enter and enable or disable the S-Video source. 
HDMI (*)  Press the ◄► buttons to enter and enable or disable the HDMI source. 
Note: 
(*) Not available in some model. 
 
— 32 —