Vivitek D803w 3d Projector User Manual

							 
 
  DLP Projector—User’s Manual 
Computer Menu  
Press the MENU
 button to open the  OSD menu. Press the cursor  ◄► button to move to the  Com-
puter  menu. Press the cursor  ▲▼ button to move up and down in the computer menu. Press  ◄► to 
change values for settings. 
 
ITEM DESCRIPTION 
Horizontal Position  Press the cursor ◄► button to adjust the display position to left or right.  
Vertical Position  Press the cursor ◄► button to adjust the display position to up or down.  
Frequency  Press the cursor ◄► button to adjust the A/D sampling clock. 
Tracking  Press the cursor ◄► button to adjust the A/D sampling dot. 
Auto Image  Press  (Enter) / ► to automatically adjustment for phase, tracking, size and position. 
 
– 23  –  
						

							DLP Projector—User’s Manual 
Video/Audio Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  
Video/Audio  menu. Press the cursor  ▲▼ button to move up and down in the  Video/Audio menu. 
Press  ◄► to change values for settings. 
 
ITEM DESCRIPTION 
Video AGC  Press the ◄► buttons to enable or disable the Automatic Gain Control for video source. 
Video Saturation  Press the ◄► buttons to adjust the video saturation. 
Video Tint  Press the ◄► buttons to adjust the video tint/hue. 
Film Mode  Press the ◄► buttons to select a different film mode.  
Video Overscan  Press the ◄► buttons to enable or disable video over scan. 
Closed Captioning  Press the ◄► buttons to enable or disable Closed Captioning 
Audio Press  (Enter) / ► to enter the Audio menu. See  Audio on page  25. 
Reset Press  (Enter) /  ► to reset all settings to default values. 
 
Note: 
Video jagging may occur when playing interlace  video. To overcome this issue, open the  
Video / Audio menu and adjust the Film Mode feature.  
 
— 24 —  
						

							 
 
  DLP Projector—User’s Manual 
Audio 
Press  (Enter) / 
► to enter the  Audio sub menu. 
 
ITEM DESCRIPTION 
Volume Press  the ◄►  buttons to adjust the audio volume.  
Mute Press  the ◄►  buttons to turn on or off the speaker. 
 
– 25  –  
						

							DLP Projector—User’s Manual 
Installation I Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Installa-
tion I  menu. Press the cursor  ▲▼ button to move up and down in the  Installation I menu. Press 
◄►  to change values for settings. 
 
ITEM DESCRIPTION 
Language  Press the cursor ◄► button to select a different localization Menu. 
Blank Screen  Press the cursor ◄► button to select different color to blank the screen. 
Projection  Press the cursor ◄► button to choose from four projection methods: 
Aspect Ratio  Press the cursor ◄► button to adjust the video aspect ratio. 
Keystone  Press the cursor ◄► button to adjust the display keystone. 
Digital Zoom   Press the cursor ◄► button to adjust the Digital Zoom menu.  
Advanced Press  (Enter) /  ► to enter the Advanced menu. See  Advanced Feature on page 29. 
Reset  Press  (Enter) / 
► to reset all settings to default values  
(expect Language and Security Lock). 
 
—  26 —  
						

							 
 
  DLP Projector—User’s Manual 
Advanced Feature 
Press the Menu button to open the 
OSD menu. Press  ◄► to move to the  Installation I menu. Press 
▲▼ to move to the  Advanced menu and then press  Enter or ►. Press  ▲▼ to move up and down in 
the  Advanced  menu. Press  ◄► to change values for setting. 
 
ITEM DESCRIPTION 
Security Lock   Press the cursor ◄► button to enable or disable security lock function. 
Wall Color  Press the cursor ◄► button to select different wall color setting. 
Presentation Timer  Press  (Enter) / ► to enter the Presentation menu. See  Advanced Feature on page 27. 
Projector ID   Press the cursor ◄► button to adjust a two digit projector ID from 0 through 99. 
Test Pattern  Press the cursor ◄► button to select internal test pattern. 
Keypad Lock  Press the cursor ◄► button to enable or disable keys can be work on keypad. 
Presentation Timer 
The Presentation Timer func tion can indicate the presentation ti me on the screen to help you achieve 
better time management when giving presentations. 
Press 
 (Enter) /  ► to enter the  Presentation Timer  sub menu. 
 
ITEM DESCRIPTION 
Timer  Press the cursor ◄► button to enable or disable presentation timer function. 
Timer Period  Press the cursor ◄► button to adjust the display timer period. 
Timer Reset  Press  (Enter) / ► to reset presentation timer counter. 
– 27  –  
						

							DLP Projector—User’s Manual 
Installation II Menu  
Press the MENU button to open the  OSD menu. Press the cursor  ◄► button to move to the  Installa-
tion II  menu. Press the cursor  ▲▼ button to move up and down in the Installation II menu.  
 
ITEM DESCRIPTION 
Auto Source  Press the cursor ◄► button to enable or disable  automatic source detection.  
Auto Power Off 
(min.) Press the cursor ◄►
 button to enable or disable automatic shutdown of lamp when no signal. 
Auto Power On  Press the cursor ◄► button to enable or disable automatic power On when AC power is supplied. 
Lamp Mode  Press the cursor ◄►
 button to select the lamp mode for higher brightness or lower brightness 
to save lamp life. 
3D   Press  (Enter) / ► to enter the 3D menu. See page  32 for more information on  3D setting.. 
Advanced   Press  (Enter) / ► to enter the Advanced menu. See  Advanced Feature on page 29. 
Factory Reset  Press  (Enter) / ►
 to reset all items to factory preset values. 
Status Press  (Enter) / 
►
 to enter the Status menu. See page 
33 for more information on Status. 
Note: 
To enjoy the 3D function, fi rst enable the Play Movie in 3D setting found in your DVD  
device under the 3D Disc Menu. 
 
— 28 —  
						

							 
 
  DLP Projector—User’s Manual 
Advanced Feature 
Press the Menu button to open the 
OSD menu. Press  ◄► to move to the  Installation II menu. 
Press  ▲▼ to move to the  Advanced menu and then press  Enter or ►. Press  ▲▼ to move up and 
down in the  Advanced menu. Press  ◄► to change values for setting. 
 
ITEM DESCRIPTION 
OSD Menu Setting  Press Enter / 
► to enter the OSD setting menu. See page  30 for more information on  OSD 
Menu Setting . 
Peripheral Test  Press Enter/ 
► to enter the Peripheral Test menu. See page  30 for more information on 
Peripheral Test . 
Lamp Hour Reset  After replacing the lamp, this item should be reset. See page 
31 for more information on Lamp 
Hour Reset . 
Low Power Mode  Press ◄► to turn Low Power Mode on or off. 
Fan Speed  Press the cursor ◄►
 button to toggle between Normal and High fan speeds.  
Note : We recommend selecting high speed in high temperatures, high humidity, or high  
altitude (1500m/4921ft) areas. 
 
 
–  29  –  
						

							DLP Projector—User’s Manual 
OSD Menu Setting  
 
ITEM DESCRIPTION 
Menu Position Press ◄► button to select different OSD location. 
Translucent Menu  Press ◄► button to select OSD background translucent level.  
Menu Display  Press ◄► button to select OSD timeout delay. 
Peripheral Test 
 
ITEM DESCRIPTION 
Remote Control Test  Press  (Enter) / ► to test the IR remote controller for diagnostic.  
Color Test  Press  (Enter) / ► to select different colors on screen. 
Button Test  Press  (Enter) / ► to test the button on keypad. 
USB Test  Press  (Enter) / ► to test the USB connection with connected PC. 
—  30 —  
						

							 
 
  DLP Projector—User’s Manual 
Lamp Hour Reset 
 
Please refer to 
Resetting the Lamp  on page 36 to reset the lamp hour counter. 
 
 
–  31  –  
						

							DLP Projector—User’s Manual 
3D 
 
ITEM DESCRIPTION 
3D Press the cursor ◄► button to select different 3D mode. 
3D Format  Press the cursor ◄► button to enable or disable different 3D Format.  
3D Sync Invert Press the cursor ◄► button to enable or disable 3D Sync Invert. 
2Dto3D  Press the cursor ◄► button to enable or disable different 2Dto3D mode. 
2Dto3D Deep  Press the cursor ◄► button to enable or disable different 2D to 3D Deep mode. 
2Dto3D Curve  Press the cursor ◄► button to enable or disable different 2D to 3D Curve mode. 
 
Note: 
1. The 3D OSD menu item is gray if there is no  appropriate 3D source. This is the default setting. 
2.  When the projector is connected to an appropria te 3D source, the 3D OSD menu item is enabled for 
selection. 
3. Use 3D glasses to view a 3D image. 
4.  You need 3D content from a 3D DVD or 3D media file. 
5.  You need to enable the 3D source (some 3D DVD  content may have a 3D on-off selection feature). 
6.  You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a 
driver on your PC and connect a USB emitter. 
7.  The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D). 
8.  Power on the glasses. Glasses normally have a power on -off switch.  
Each type of glasses has their own configuration instructions. Please follow the configuration instruc-
tions that come with your glasses to finish the setup process. 
 
Note:  
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions, 
Please follow the guide to finish the setup process. 
 
— 32 —