Vizio E321MV Razor Led Lcd Hdtv User Manual

1
3
E321MV
3. Turn the attached thumbscrew until it 
is completely loosened. 
 
 
 
 
 
4.  Gently remove the stand neck. 
 
 
 
 
 
 
5.  Attach your TV and wall mount to the wall, carefully following the 
instructions that came with your mount. 
 
Use only with a UL-listed wall mount bracket rated for the weight/load o\
f 
this TV. See 
Appendix A - Specifications for the weight of this TV.  

2
4
Controls and Connections
USB:Connect a USB thumb drive to view photos.
HDMI (1,2,3): Connect HDMI devices.
Component: Connect component device. 
Composite: Connect composite device.
3.5mm Stereo Out: Connect 3.5mm audio device.
Cable/Antennal: Connect RF/Coaxial connector from cable, antenna, or 
satellite box.
RGB PC: Connect RGB cable from computer. Use 3.5mm port to 
connect PC audio.
3.5mm PC   
Audio In: Connect 3.5mm cable from PC audio out when using 
RGB PC port to display PC output.
Optical...

2
5
E321MV
Right Side Panel
Right Side Panel
Power
Menu
Channel Up
Volume Up
Channel Down Volume Down
Input
Power: Turn the TV on or off.
Menu: Display on-screen menu.
Channel Up/Down: Change the channel.
Volume Up/Down: Increase or decrease the loudness of the TV audio.
Input: Change the input device. Press once to display the 
Input menu. Continue pressing the button to highlight 
a different input source. Press Menu to confirm your 
selection.
Front Panel
Front Panel
Remote Control 
Sensor
VIZIO...

6
2E321MV
Power/Standby:Turn the TV on or off.
Input: Change the input device. 
A/V Controls: Control external device (CEC-enabled 
devices only).
Info: Display the Info Window.
CC: Open the Closed Captioning menu.
Menu: Display the on-screen menu.
Exit: Close the on-screen menu.
Arrow: Navigate the on-screen menu and episode 
guide.
OK: Select highlighted menu option.
Guide: Display the episode guide (digital channels 
only).
Back: Go to the previous on-screen menu op-
tions.
V Button: Launch the USB...

2
7
E321MV
Replacing the Batteries
1. Remove the battery cover by pressing 
gently on the “V” and pushing the 
cover away from the remote.
2.  Insert two AAA batteries into the 
remote control. Make sure that the (+) 
and (-) symbols on the batteries match 
the (+) and (-) symbols inside the 
battery compartment.
3.  Replace the battery cover. 
 
• Use only good quality batteries.
• Inserting the batteries incorrectly may result in cracking or leakage   
   that may cause a fire or result in injury.
•...

3
8Your HDTV can be easily connected to an external device:
•	DVD	or	Blu-Ray	player
•	 Video	game	console
•	 Cable	box
•	 External	antenna
•	 Or	other	device
Before You Begin
To connect a device to the HDTV:
1. Verify that the device has one of the following types of video ports 
available: 
Required	Device	Ports
HDMI RGB
RF/Antenna
Component
Composite	AV
2.  Ensure the TV has a matching port available.
3.  Ensure you have a cable that matches the available port. For example, if 
you are connecting a...

3
9
E321MV
Select One:
OR
OROR
OR
BETTER GOODBEST
HDMI
RF /
C OAXIAL
RGB
C OMPONENT
C OMPOSITE
AV DIGIT
AL
DIGIT AL /
ANAL OG
ANAL OG
ANAL OG
ANAL OG
Device	Connection	Chart
Select	one	of	the	connection	types.	
	
Use	the	cable(s)	shown	to	connect	 	
the	TV	to	your	device.  

4
10
The first time you turn on the TV, the Setup App will guide you through each of 
the steps necessary to get your TV ready for use.
Before you begin the first-time setup:•	Your	TV	should	be	installed	and	the	power	cord	should	be	connected	
to	an	electrical	outlet.
•	 Have	your	remote	ready.	Ensure	the	batteries	are	inserted.
•	 Your	devices	should	be	connected.
To complete the first-time setup:
1.  Turn the TV on by pressing the 
Power/Standby button on the 
remote. 
 
The Setup App is displayed....

5
11
From the TV Settings Menu, you can:
•	Change	the	input	source	or	
rename	inputs
•	 Set	up	channels
•	 Change	the	on-screen	menu	
language
•	 Change	the	TV’s	date	and	time
•	 Adjust	the	TV	settings	for	use	with	
a	PC
•	 Turn	the	VIZIO	light	on	or	off
Navigating the On-Screen Menu
To open the on-screen menu, press the OK 
or MENU button on the remote. 
Use the Arrow buttons to highlight a menu 
option, and press the OK button to select 
that option. 
Changing the Input Source
External devices such as...

12
5E321MV
Customizing Input Names
When you have multiple devices connected to your TV, it can become difficult to 
remember the inputs to which they are connected. Your TV features the ability to 
customize the names of these inputs to make them easy to remember. (Custom 
names have a 10-character limit.)
For example, 
HDMI 1 could be renamed as My Blu-ray.
To customize an input name:
1.  Press the MENU button on the remote. 
The on-screen menu is displayed.
2.  Use the Arrow buttons to highlight TV...