Westinghouse LD-325VX Tv Users Manual

IMPORTANT INFORMATION
7
English
WARNINGS AND PRECAUTIONS
• Do not orient the LED TV towards direct sunlight to reduce glare.
• If the LED TV will not be used for a long period of time, unplug the unit and  remove 
 the batteries from the remote control.
• Avoid touching the display screen by hand or any object.
• Never remove the rear cover. The  LED TV interior 
 contains high-voltage 
parts. You may be seriously  injured if you touch them.
• Always handle the LED TV with caution when moving it.
• Do...

IMPORTANT INFORMATION
8
English
ANTENNA INSTALLATION SAFETY
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LED TV, be sure the 
antenna or cable system is grounded to prevent voltage surges and built-up static 
charges. Article 810 of the National Elec trical Code, ANS/NFPA 70, provides 
information on proper grounding of the mast  and supporting structure, grounding of 
the lead-in wire to an antenna discharge unit, connection to grounding electrodes, 
and...

IMPORTANT INFORMATION
9
English
CLEANING THE LED TV
To clean the screen:
1Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other 
particles.
2If it is still not clean, apply a sma ll amount of non-ammonia, non-alcohol 
based glass cleaner onto a clean, soft,  lint-free cloth, and wipe the screen.
To clean the case:
1Wipe the case with a soft, dry cloth.
2If it is still not clean, apply a sma ll amount of non-ammonia, non-alcohol 
based, mild non-abrasive detergent onto a clean,...

PACKAGE CONTENTS
10
English
PACKAGE CONTENTS
32” LED TV UnitRemote Control (with 2x AAA batteries)
LED TV BaseQuick Connect Guide
Power CordWarranty Card
AC AdapterWarranty Brochure
Screws for BaseUser Manual
Favorite MTSZ
Z
ZC.C.
TV
Video1
HDMI1
YPbPr1
PC
Video2
HDMI2
YPbPr2 ENT
DA
B
C
Vol Input
Ch
Enter
RMT-11
M4x18 *4pcsM5x16 *1pc
Cover neck Base 

CONTROL PANEL
11
English
CONTROL PANEL
ItemDescription
1. MENU Displays the LED TV setup screen.
2. Volume +/- • Adjusts the volume during playback.
•

Selects an item on a menu screen.
3. Channel +/- • Switches the channel during TV viewing.
•

Selects an item on a menu screen.
4. INPUT • Selects the video input source.
•

Executes a command on a menu screen.
5. Power Toggles the power on and off.
LRA
V 2U SBL
R
2
3
1
4
5
MENU
INPUT
VOL
CH 

TERMINALS
12
English
TERMINALS
ItemFunction
1. DC in Connects the AC adapter from this outlet to a 
power source.
2. TV tuner Connects the LED TV to an antenna or cable 
ser

vice.
3. Composite AV input Connect to an external AV device such as a VCR, 
DVD

 player, set-top  box, or game system.
4. Audio in Connects to the audio out port of a computer.
5. VGA Connects to a computer or other device with a 
VGA outpu

t using a 15-pin VGA cable.
6. Audio out Connect to an audio output device.
7. SPDIF audio...

REMOTE CONTROL
13
English
REMOTE CONTROL
ItemDescription
1. Mute   Mutes the sound. Press again to toggle 
th

e sound back on.
2. Power  Toggles the TV power on or off.
3. Backlight  Adjusts the LED screen backlight.
4. MTS Toggles the Multichannel Television 
S

ound options.
5. CC Toggles the closed ca
p
 tion display on or 
off.
6. Sleep  z
Zz Sets the sleep timer for the LED TV to 
tu
rn off automatically.
7. Channel keys Use to key in the channel number.
8. Favorite  Switches to the favorite...

REMOTE CONTROL OPERATION
14
English
REMOTE CONTROL OPERATION
INSTALLING THE REMOTE CONTROL BATTERIES
1Remove the battery cover.
2Insert the batteries. Make sure the  (+) and (–) marks on the batteries match 
those inside the compartment.
3 Re-att
ach the battery cover.
REMOTE CONTROL TRANSMISSION RANGE
Transmission range depends upon the reception angle. The range of coverage is 20° 
horizontal/vertical at a distance of 10 feet from the LED TV.CAUTIONS
:
• Only use AAA batteries.
• Do not mix new and old...

LED TV BASE
15
English
LED TV BASE
INSTALLING THE LED TV BASE
1Open the LED TV carton box.
2Remove the LED TV base.
3 Remove the 
 plastic bag.
4 Remove 
 the two top carton stabilizers from the LED TV.
5 Remove 
 the protective plastic covering the LED TV.
6 Grasp the two sides 
 of the LED TV and then pull it  out of the carton box.
7 Remove 
 the two bottom carton stabilizers from the LED TV.
8 La
y the LED TV on a clear, flat, and stable surface.
9Align the base to the bottom side 
 of the LED TV and...

LED TV BASE
16
English
REMOVING THE LED TV BASE
If you intend to repack the LED TV unit (for shipping or storage) or you want to 
change the installation to a wall mount option, you must first remove the LED TV 
base.
1
Turn off the LED TV and all connected devices.
2Disconnect the power cord from the LED TV.
3 Disconnect 
 all signal cables from the I/O port terminals.
4 Remove the 
 M5 x 16 screw securing the base to the desk.
5 La
y the LED TV on a clear, flat, and stable surface.
6Remove the 
 screws...