Westinghouse LD-425 Series Tv Users Manual

LED TV BASE
16
English
REMOVING THE LED TV BASE
If you intend to repack the LED TV unit (for shipping or storage) or you want to 
change the installation to a wall mount option, you must first remove the LED TV 
base.
1Turn off the LED TV and all connected devices.
2Disconnect the power cord from the LED TV.
3Disconnect all signal cables from the I/O port terminals.
4Remove the M5 x 16 screw securing the base to the desk.
5Lay the LED TV on a clear, flat, and stable surface.
6Remove the screws securing...

ANTENNA CONNECTION
17
English
ANTENNA CONNECTION
OUTDOOR ANTENNA CONNECTION
CABLE TV (CTV/DTV) CONNECTION
The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O 
panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit, 
screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium 
pay channels. Since the signals of these channels are scrambled, a cable TV 
converter/descrambler is usually provided to the subscriber by the cable TV...

EXTERNAL DEVICE CONNECTIONS
18
English
• A position on the RF switch (not supplied) – You can view all unscrambled 
channels by using the TVs channel keys.
• B position on the RF switch (not supplied) – You can view the scrambled 
channels via the converter/descrambler by using the converters channel 
keys.
EXTERNAL DEVICE CONNECTIONS
You can enjoy picture and sound by connecting various audio-video devices to the 
terminals located on the rear and side I/O panels of the LED TV.
• TV cable input – You...

EXTERNAL DEVICE CONNECTIONS
19
English
The following diagram shows the external device connections.
VGAY
L
R
AUDIO INTUNERDC IN
SPDIF HDMI 1 HDMI 2 USB
L
R
Antenna cable / 
Cable TV line
Antenna /
Cable system
PC
AUDIO OUT
AUDIO OUT
3.5 mm stereo mini jack cable
RGB cable
Audio cable
SPDIF 
cable
HDMI-HDMI 
cableDVI-HDMI 
cable
DVD player
with an HDMI 
terminal
AC to DC adapter Power outlet
Home video 
game system
CamcorderVCR
DVD player
Digital TV tuner
Composite AV cable
DVD player
with a DVI 
terminal...

POWER CONNECTION
20
English
POWER CONNECTION
CONNECTING AC POWER
Connect the power cord of the AC to DC adapter to the LED TV then to a proper AC 
outlet.
INITIAL SETUP
Press  on the control panel or on the remote control to turn on the LED TV. Select 
the desired language and your time zone to use the Setup Wizard. The Setup 
Wizard will guide you on how to scan and store channels.
IMPORTANT:The LED TV is designed to be powered via an AC to DC adapter. Use 
ONLY the AC to DC adapter included in the...

BASIC OPERATIONS
21
English
BASIC OPERATIONS
TURNING THE POWER ON AND OFF
Turning on the power
Press  on the control panel or on the remote control to turn on the LED TV.
Turning off the power 
Press  on the control panel or on the remote control to turn off the LED TV. The 
LED behavior will depend on the enabled Power settings.
ADJUSTING THE VOLUME
Vo l u m e
Press Vo l + to increase the volume; press Vo l -  
to decrease the volume.
Mute
Press  to turn off the sound. The mute icon 
appears on the...

BASIC OPERATIONS
22
English
CHANGING CHANNELS
Follow the instructions below to change channels.
Using the Ch  /  Buttons
Browse channels
To browse through the available channels, press Ch  /  on 
the remote control or on the control panel.
Using the Channel Keys
Selecting channel
To change to a certain channel, key in the channel number using 
the channel keys and press ENT.
 
Selecting digital channel
To select a digital channel, key in the digital channel number using 
the channel keys and the • key,...

BASIC OPERATIONS
23
English
Using the Input Key
Select source using Input Key
1Press Input.
2A list of supported video sources is displayed.
3Press  /  to select the preferred source.
4Press  to switch to the selected input source.
ADJUSTING THE DISPLAY FORMAT
The input source can sometimes affect the way images are displayed on-screen. 
You can adjust the display format to view the image properly.
Format Options
Press  repeatedly to toggle the display format. As you toggle 
each option on, the actual...

SETUP MENUS
24
English
SETUP MENUS
SETUP MENU OPERATION
Use the setup menus to configure the various operational settings of the LED TV.
Displaying the setup menu screen
Press  on the remote control or MENU on the control panel to display the setup 
menu screen.
Navigating the setup menu screen
Use the buttons on the remote control or on the control panel to navigate through 
the menu screens.
ActionRemote ControlControl Panel
Displays or closes the menu bar.MENU
• Select and display a primary 
menu.
•...

SETUP MENUS
25
English
PICTURE
Use the Picture sub-menus to configure the display quality.
Press  on the remote control or MENU on the control panel to display the setup 
menu screen then select Picture to display the Picture sub-menu. The following 
options are available: Brightness, Contrast, Saturation, Video Presets, Sharpness, 
Color temperature, Hue, and Reset.
Brightness
Use Brightness to adjust the luminance level.
Adjusting Brightness
1  Use the  /  keys to select Brightness and press  .
2...