Westinghouse LD-4655VX Lcd Tv Users Guide

							SETUP MENUS
47
English
NC-17
May contain explicit sex scenes, an accumulation of sexually-
oriented language, and/or scenes of excessive violence. Suitable 
for adult audiences only. Rating does not signify that the film is 
obscene or pornographic.
XContains extreme violence or explicit sex; suitable for adult 
audiences only.
RatingDescription 
						

							SETUP MENUS
48
English
Adjusting MPAA Rating
1  Use the  /  keys to select MPAA Rating and press  .
2  Use the  /  /  /  keys to select the desired rating and press  repeatedly to block or unblock. 
3  Press  to save and exit the screen.
•Canada English: Use this sub-menu to select the classification categories 
(based on Canadian ratings) of allowable TV programs 
and movies.
RatingDescription
EExempt shows
CSuitable for viewing by children of all 
ages.
C8+Not suitable for children under 8 years of 
age.
GSuitable for general audiences.
PGParental guidance advised.
14+Suitable for people 14 years of age or 
older.
18+Suitable for people 18 years of age or 
older. 
						

							SETUP MENUS
49
English
Adjusting Canada English Rating
1  Use the  /  keys to select Canada English Rating and press  .
2  Use the  /  /  /  keys to select the desired rating and press  
repeatedly to block or unblock. 
3  Press  to save and exit the screen.
•Canada French: Use this sub-menu to select the ratings of allowable TV 
programs and movies. These ratings are based on the 
classification categories determined by La Régie du 
cinéma du Québec.
RatingDescription
EExempt shows
GFor general audiences.
8 ans +Not suitable for children under 8 
years of age.
13 ans+Not suitable for persons under 13 
years of age.
16 ans+Not suitable for persons under 16 
years of age.
18 ans+Not suitable for persons under 18 
years of age. 
						

							SETUP MENUS
50
English
Adjusting Canada French Rating
1  Use the  /  keys to select Canada French Rating and press  .
2  Use the  /  /  /  keys to select the desired rating and press  
repeatedly to block or unblock.
3  Press  to save and exit the screen.
•Channel Block: Channel Block allows you to block channels.
Adjusting Channel Block
1  Use the  /  keys to select Channel Block and press  .
2  Use the  /  keys to select the desired channel and press  
repeatedly to block or unblock.
3  Press  to save and exit the screen.
•Change Password: Change Password allows you to change your current 
password.
Changing Password
1  Use the  /  keys to select Change Password and press  .
2  Use the Channel keys to enter the current password and press .
3  Use the Channel keys to enter the new password and press .
4  Use the Channel keys to enter the new password again for confirmation 
and press 
.
5  Press  to save and exit the screen.
11 . 0
23.0 22.0 21.0
17.0
16.1
13.0 
						

							SETUP MENUS
51
English
OSD Timeout
Use OSD Timeout to adjust the OSD duration on the screen: 10 sec, 20 sec, or 30 
sec.
Adjusting OSD Timeout
1  Use the  /  keys to select OSD Timeout and press  .
2  Press the  /  keys on the remote control to select 10 sec, 20 sec, or 30 
sec.
3  Press  to save and exit the screen.
OSD Language
Use OSD Language to select the language to display on the screen: English, 
French, or Spanish.
Adjusting OSD Language
1  Use the  /  keys to select OSD Language and press  .
2  Press the  /  keys on the remote control to select English, French or 
Spanish.
3  Press  to save and exit the screen.
en
OSD Timeout
20 sec30 sec10 sec
OSD Language
FrenchSpanishEnglish
en 
						

							SETUP MENUS
52
English
Power Settings
Use this sub-menu to configure power-related settings for the LED TV.
The following options are available:
•VGA port -DPMS: Use this setting to enable or disable VGA port -DPMS. 
• Backlight: Use this setting to select the backlight mode: Bright Room, 
Medium Room, or Dark Room.
• Dynamic Contrast: Use this setting to enable or disable Dynamic Contrast.
Adjusting Power Settings
1  Use the  /  keys to select Power Settings and press  .
2  Use the  /  keys to select a desired option.
3  Use the  /  keys to adjust the value.
4  Press  to save and exit the screen.
Reset All
Select Ye s on this sub-menu to reset all LED TV operational settings. Do this only if 
any of the following conditions occurs:
• The system fails to respond to the remote control (ensure that the remote 
control batteries are still working and you are within the transmission range).
• The new configuration settings cause unexpected results.
• You forget the system PIN.
en
Reset All 
						

							SETUP MENUS
53
English
Version
Use this sub-menu to view the LED TV’s serial number and firmware version.
Version
en 
						

							WALL MOUNT OPTION
54
English
WALL MOUNT OPTION
The LED TV has been fitted with VESA FPMPMI compliant mounting holes. These 
200 x 200 mm mounting holes allow the unit to be mounted on a wall. Use the four 
M6 x 18 mm screws to wall mount the LED TV.
WALL MOUNT INSTALLATION REMINDERS
• Remove the LED TV base first before mounting the unit on a wall.
• To fix the AC to DC adapter to the LED TV:
1. Carefully place the LED TV face down on a soft and flat surface (blanket, 
foam, cloth, etc) to prevent any damage. 
2. Put two cable ties separetely through 
two holes on the rear of the LED TV.
3. Place the adapter on the holes and 
cable ties.
4. Tighten up both cable ties to fix the 
adapter firmly to the LED TV.
• It is the users responsibility to use a UL 
listed wall mount unit rated to support 
the weight of this LED TV.
• Please consult qualified contractors for wall mount installation.
CAUTION:
The incomplete or improper mounting of this unit to a wall may cause it to fall down 
resulting to property damage and/or potentially serious injury.
TUNER
R L Y VGA
AUDIO IN DC INR
L
TUNER R L
Y VGA
AUDIO IN DC INR L 
						

							TROUBLESHOOTING
55
English
TROUBLESHOOTING
ProblemCorrective Action
No power • Make sure the power indicator is illuminated 
blue.
• Make sure the power cord is securely  connected to the AC-in jack and is plugged 
into a functional AC outlet. You may want to 
plug in another electrical device to the power 
outlet to verify that it is supplying the proper 
voltage.
Power is suddenly 
turned off. Make sure the sleep timer is turned off.
Forgotten PIN Use Reset All in Settings menu to reset your 
password.
Remote control 
does not work. • Press only one button at a time.
• Make sure the batteries are properly inserted.
• The batteries may already be drained out. 
Replace batteries with new ones.
Remote control 
code cannot be 
detected by a 
universal remote. • Purchase a separate learning remote control.
• Go to www.westinghousedigital.com
 for a list 
of remote codes.
No picture • Make sure the video i
nput cable is properly 
connected to the correct terminal, and that the 
correct input mode is enabled. To illustrate, 
when a VGA cable is connected to display a 
computer screen, the PC input mode must be 
enabled.
• Verify that the antenna is properly connected  and that the preferred channel is enabled in 
the channel list. Press and select 
Channels/Channel List.
• Adjust the display settings. 
						

							TROUBLESHOOTING
56
English
No picture or the No
Signal message 
appears when a 
VGA cable is 
connected.• Make sure the VGA cable is properly 
connected to the LED TV’s VGA port.
• Decrease the video resolution setting on the  computer and try again.
• Adjust the display settings.
Picture is cut off or 
appear in a sidebar 
screen. Press   to adjust the Aspect ratio.
Poor image quality 
in TV mode (cutoff 
picture, snowy 
images). • Check your antenna connection. If necessary, 
rotate the antenna and wait up to ten seconds 
for a signal.
• Reduce signal splitters and excessively long  cables.
• Replace poor antenna cables and/or  connectors to improve signal quality.
• Press   to adjust the Aspect ratio.
• Adjust the Noise Reduction setting in Picture  menu.
• In HDMI mode, make sure the external device  is compatible with the LED TV.
Wrong, abnormal or 
missing colors • If any colors (red, green or blue) are missing, 
check the video cable to make sure it is 
securely connected. Loose or broken pins in 
the cable connector could cause an improper 
connection.
• Adjust the Hue, Saturation and Color  Temperature settings  in Picture menu. 
• Connect the TV to another computer and  check if the problem is with the computer 
screen.
ProblemCorrective Action