Westinghouse Television TX-42F810G User Manual
Have a look at the manual Westinghouse Television TX-42F810G User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 23 Westinghouse manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SETUP MENUS 47 English OSD Timeout Use OSD Timeout to adjust the OSD duration on the screen: 10 sec, 20 sec, or 30 sec. en OSD Timeout 20 sec30 sec10 sec Adjusting OSD Timeout 1 Use the / keys to select OSD Timeout and press . 2 Press the / keys on the remote control to select 10 sec, 20 sec , or 30 sec . 3 Press to save and exit the screen. OSD Language Use OSD Language to select the language to display on the screen: English, French, or Spanish. OSD Language FrenchSpanishEnglish en Adjusting OSD Language 1 Use the / keys to select OSD Language and press . 2 Press the / keys on the remote control to select English, French or Spanish . 3 Press to save and exit the screen.
SETUP MENUS 48 English Power Settings Use this sub-menu to configure power-related settings for the LCD TV. Power Settings VGA port-DPMS OFF Backlight Dark Room :Select Enter: Confirm Menu: Exit The following options are available: •VGA port -DPMS : Use this setting to enable or disable VGA port -DPMS. • Backlight: Using this setting to select backlight options: Bright Room, Medium Room, and Dark Room. Adjusting Power Settings 1 Use the / keys to select Power Settings and press . 2 Use the / keys to select a desired option. 3 Use the / keys to adjust the value. 4 Press to save and exit the screen.
SETUP MENUS 49 English Reset All Select Ye s on this sub-menu to reset all LCD TV operational settings. Do this only if any of the following conditions occurs: • The system fails to respond to the re mote control (make sure the remote control batteries are still working an d that you are within the transmission range). • The new configuration setti ngs caused unexpected results. • You forget the system PIN. en Reset All Version Use this sub-menu to view the LCD TV’s serial number and firmware version. Version en
WALL MOUNT OPTION 50 English WALL MOUNT OPTION The LCD TV has been fitted with VESA FPMPMI compliant mounting holes. These 200 x 100 mm mounting holes allow the unit to be mounted on a wall. Use the four M6 x L10 mm screws to wall mount the LCD TV. U SB L RH DM ICO M PO NEN TPC / V GAP C A U DIOSPDIF O UTY Pb Pr L R WALL MOUNT INSTALLATION REMINDERS • Remove the LCD TV base first before mounting the unit on a wall. • It is the users responsibility to us e a UL listed wall mount unit rated to support the weight of this LCD TV. • Please consult qualified contra ctors for wall mount installation. CAUTION: The incomplete or improper mounting of this unit to a wall may cause it to fall down resulting to property damage and/or potentially serious injury.
TROUBLESHOOTING 51 English TROUBLESHOOTING ProblemCorrective Action No power • Make sure the power indicator is illuminated blue. • Make sure the power cord is securely connected to the AC-in jack and is plugged into a functional AC outlet. You may want to plug in another electrical device to the power outlet to verify that it is supplying the proper voltage. Power is suddenly turned off.Make sure the sleep timer is turned off. Forgotten PINUse Reset All in Settings menu to reset your password. Remote control does not work. • Press only one button at a time. • Make sure the batteries are properly inserted. • The batteries may already be drained out. Replace batteries with new ones. Remote control code cannot be detected by a universal remote.• Purchase a separate learning remote control. • Go to www.wde.com for a list of remote codes. No picture • Make sure the video input cable is properly connected to the correct terminal, and that the correct input mode is enabled. To illustrate, when a VGA cable is connected to display a computer screen, the PC input mode must be enabled. • Verify that the antenna is properly connected and that the preferred channel is enabled in the channel list. Press and select Channels/Channel List. • Adjust the display settings.
TROUBLESHOOTING 52 English No picture or the No Signal message appears when a VGA cable is connected. • Make sure the VGA cable is properly connected to the LCD TV’s VGA port. • Decrease the video resolution setting on the computer and try again. • Adjust the display settings. Picture is cut off or appear in a sidebar screen. Press to adjust the Aspect ratio. Poor image quality in TV mode (cutoff picture, snowy images). • Check your antenna connection. If necessary, rotate the antenna and wait up to ten seconds for a signal. • Reduce signal splitters and excessively long cables. • Replace poor antenna cables and/or connectors to improve signal quality. •Press to adjust the Aspect ratio. • Adjust the Noise Reduction setting in Picture menu. • In HDMI mode, make sure the external device is compatible with the LCD TV. Wrong, abnormal or missing colors • If any colors (red, green or blue) are missing, check the video cable to make sure it is securely connected. Loos e or broken pins in the cable connector could cause an improper connection. • Adjust the Hue, Saturation and Color Temperature settings in Picture menu. • Connect the TV to another computer and check if the problem is with the computer screen. ProblemCorrective Action
TROUBLESHOOTING 53 English No sound • Make sure the audio input cable is properly connected to the correct terminal, and that the correct input mode is enabled. • The volume may be muted, press or Vol+ key to turn on the volume. • Adjust the Bass, Treble, and Balance settings in Audio menu. • If you are using the TV speakers, make sure the TV Speakers option is set to On in Audio menu. • If you are using an external audio device, press and select Audio to make sure the TV Speakers option is set to Off in Audio menu. NOTES: If the problem condition persists even after performing the recommended corrective actions, contact us by: • Logging on to www.wde.com • Contacting the Westinghouse Customer Service at (800) 701-0680 or e-mail us at [email protected] ProblemCorrective Action
SPECIFICATIONS 54 English SPECIFICATIONS ItemSpecification Model NameCezanne 42 Panel Active Area (Diagonal, mm)697.6845 x 392.256 Resolution1920 x 1080 Brightness (Nits, typ)400 nits (min) to 500 nits (typical) Contrast Ratio (min)3000:1 Response Time (min)6.5ms(g-g) Aspect Ratio1.77 (16:9) Display color16.7M Audio/Video Input/Output Terminals •HDMI x3 • AV with R/L Audio x2 • YPbPr with R/L Audio x1 • VGA with Audio mini jack blue x1 • SPDIF Out x1 • USB for service x1 • Tuner x1 • R/L Audio Line Out X1 Speaker Out8W (2 channels) AV Ti m i n g480i/p, 720p, 1080i PC Timing 640 x 480 @ 60Hz/75Hz, 800 x 600 @ 60Hz/75Hz, 1024 x 768 @ 60Hz/75Hz, 1280 x 720 @ 60Hz,1360 x 768 @ 60Hz, 1280 x 1024 @ 60Hz, 1366 x 768 @ 60Hz Power Consumption (Watts)163W Power Consumption (Standby, Watts)
SPECIFICATIONS 55 English Physical Specifications Dimensions (WxHxD)With stand: 774x549x193 mm Without stand: 774x507x88 mm Weight (Net)9 kgs Weight (Gross)11.43 kgs NOTES: • These product specifications are subject to change without user notification. • Do not set your computer graphics card to exceed the unit’s refresh rates; doing so may cause damage to the LCD TV. ItemSpecification