Whirlpool Adg 130 Quick Reference Guide

GB 
-1-Chart
PROGRAMS 
SELECTION 
BUTTON
Push “Programs” 
button (repeatedly) 
until the indicator of 
the required 
program lights up 
(see “Table of 
programs” - next 
page).BEFORE USING THE APPLIANCE FOR THE FIRST TIME CAREFULLY READ THIS QUICK REFERENCE GUIDE AND THE ASSEMBLY INSTRUCTIONS!
HALF LOAD 
BUTTON
Half load cycle can be 
used for the upper or 
lower rack. Select the 
required program 
then press the “Half 
Load” button - the 
light comes on. Turns 
off at the end of the 
program. The “Half...

GB 
-2-
Chart
1) Program data obtained in conformity with European standard EN 50242, obtained under normal conditions (without additional options) 
and may vary depending on conditions. Differences of up to 20 minutes are possible with sensor programs as a result of the appliance’s 
automatic calibration system.
2) Reference program for energy label in compliance with EN 50242 regulations. - Note for Testing Institutes: for detailed information on 
the EN/Standard loading comparison test and other...

GB 
-3-
First time use
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray arms
1.Ask your water supply company what the water hardness
 is...
2....enter this value on 
your dishwasher
Suggestions for detergent use
German
degrees °dH
French
degrees °fH
English
degrees °eH
Water hardness
level
3 first PROGRAM LEDs 
lit on the panel 
(see table of programs)
P1 P2 P3
Gel or 
Powder
(rinse aid and 
salt)
Ta b l e t s
0...

GB 
-4-
Daily check
3
Daily use
Adding detergent - 
Use only detergent specifically for dishwashers in accordance with the supplier’s recommendations
Open the cover A 
(press the dedicated button).
Only fill the 
detergent 
dispenser prior to 
starting a wash 
program.Shut the cover 
by pressing dedicated ribs. Insert detergent: Tablet / powder / liquid
 
into the big chamber.
Use only one tablet per one cycle, 
only placed in detergent 
dispenser.
All types of tablets can be used, 
but for 2 in 1 type...

GB 
-5-
How to load the racks
4
A - Two trays to load cutlery
Position 1 Position 2
Load cutlery with the handle into the pins. Knives or cutlery with bulky handle can be 
loaded with the head into the pins.
This positions is ideal to load both cutlery, 
and long tools.Adjust the upper rack in lower position 
before to move the cutlery rack in 
Position 2 (see description in the following 
page).
Cutlery rack
 

GB 
-6-
How to load the racks
4
D
 - CLOSEDD
 - OPEN
In the upper rack you can load glasses, cups, bowls and, in the right 
side of the rack, you can load the dessert dishes.Adjustable glass holder - B  (provided in some models)
helps to load stemmed glasses.
How to adjust upper rack height (if available) - It could be useful 
to lift up upper rack to have more space in lower rack or bring it 
down to load long stem glasses.
- Grasp and take out the two lateral handles (
C) must be on same 
level
 and...

GB 
-7-
How to load the racks
4
Arrange crockery so that water does not collect in cavities, ensuring that the spray arms turn freely. Only use dishwasher-proof crockery and dishes. Do not 
use the dishwasher for washing wooden items, aluminium, tin, silver cutlery or decorated crockery (unglazed). In the baskets, dishes (e.g. plates, bowls, 
pots) must be placed in a correct way to let water flow down!
In the lower rack plates and pots can be loaded. 
Vertical plate holders (E) can be folded down 
to...

GB 
-8-
Switching off the appliance. Everything OK...Wash cycleSelect program6
7
8
After the program is completed appliance turns into Standby mode automatically. All indicator lamps switch off.
Exercise caution when opening the door: beware of hot steam. 
Unload the appliance starting from the lower rack in order to avoid any residual drips of water falling onto crockery below. 
Maintenance and care
Maintenance and care
The dishwasher door must be closed and the water tap open.To pause the program (e.g....

GB 
-9-
What to do if...
If a fault occurs, before contacting
 the After-sales Service, make the following checks to try and remedy the problem.
Most faults can be remedied by taking the following courses of action, quickly restoring normal appliance operation.
The appliance...
Possible causes...
Solutions...
...is not working/will not start
- The appliance must be switched on.
- Check the household circuit fuse if there is no power supply.
- The dishwasher door doesn’t close.
- Check if the dishwasher’s...

GB 
-10-
What to do if...
Crockery and cutlery... Possible causes... Solutions...
...are not perfectly clean/have 
food residues
- Too little space between dishes (incorrect 
arrangement of the concave items in the 
rack).
- Arrange crockery so that items do not touch each other. Concave items (e.g. 
bowls, cups) must be arranged facing downwards in the rack.
- Too little detergent; detergent too old or 
incorrectly stored.
- If necessary, use more detergent, observing the manufacturer’s indications as...