Whirlpool Adg 151 Instructions For Use

12
INSTRUCTIONS FOR USE
BEFORE USING THE DISHWASHER/CONNECTIONS
PRECAUTIONS AND GENERAL RECOMMENDATIONS
HOW TO FILL THE SALT CONTAINER
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
CARE AND MAINTENANCE
396gb94500.fm5  Page 12  Monday, July 9, 2001  3:26 PM
 

13
BEFORE USING THE DISHWASHER/CONNECTIONS
1. Removing the packaging and controls: 
After unpacking, make sure that the dishwasher is 
undamaged and that the door closes correctly. If 
in doubt, contact a qualified technician or your 
local retailer.
•
Keep the packaging materials (plastic bags, 
polystyrene parts, etc.) out of reach of children, as 
they are potentially dangerous.
2. Water and electrical connections
All water and electrical connections must be 
carried out by a qualified technician in...

14
PRECAUTIONS AND GENERAL RECOMMENDATIONS
1. Packing:
The packing box may be fully recycled as 
confirmed by the recycling symbol.
2. Energy and water saving tips:
•
Do not rinse crockery under running water.
•
Always fully load the dishwasher before switching 
on or set the wash programme to half load 
(if available) if one rack only is loaded.
•
If ecological energy sources are available such as 
solar panel heating, heat pumps or centralised 
heating systems, the appliance may be connected 
to the...

15
HOW TO FILL THE SALT CONTAINER
From a water hardness category of 1
, before using the dishwasher for the 
first time, fill the salt container with regeneration salt (to find out the 
hardness level of water in your area, contact your local Water Board or 
check the last bill you received). If the water hardness level does not 
correspond to position 2
 on the selector (setting on delivery) or if the 
water hardness level changes, set the correct water hardness level on the 
salt container cap or...

16
To fill the salt container
Warning: only use regeneration salts for use in domestic dishwashers!
Do not fill the salt container with unsuitable substances, such as 
detergent, as this will cause irreparable damage to the water softener 
system.
1.Remove the lower rack.
2.Unscrew the cap by turning it counter-clockwise.
3.When first using the dishwasher: fill the salt container to the rim with 
water.
4.Fill the salt container to the rim with salt (using the filler provided) 
(when filling for the...

17
HOW TO FILL THE RINSE AID DISPENSER
The rinse aid facilitates drying and prevents the formation of 
unsightly spots and streaks on crockery. Before using the dishwasher 
for the first time, fill the rinse aid dispenser.
Only use rinse aids recommended for use in domestic dishwashers.
1.
Press the button to open the cover.
2.
Fill the dispenser with rinse aid until the dispenser level indicator 
becomes dark.
If any rinse aid is spilled, it must be removed immediately!
 
This prevents the formation of...

18
HOW TO FILL THE DETERGENT DISPENSER 
A special compartment is provided for the detergent.
The use of detergent in excess of the recommended dosage may cause 
pollution. The recommended dosage varies for different brands.
If you use detergents in pellet form, follow the manufacturers 
directions for use.
“New generation” detergents contain enzymes that give better 
washing results when Bio programmes are used. However, these 
programmes are also suitable for all other dishwasher detergents.
Add the...

19
CARE AND MAINTENANCE
Before cleaning or carrying out maintenance, switch off the 
appliance, disconnect the mains plug and turn off the water tap.
Cleaning the outside of the appliance:
To clean the outside of the appliance, use a neutral detergent and a 
damp cloth.
Clean the control panel with a damp cloth only.
Do not use abrasive detergents.
Cleaning the inside of the dishwasher:
Regularly wipe the door seal and inside of the door with a damp cloth 
to remove any food residue.
Upper spray arm:
1....

20
CARE AND MAINTENANCE
Cleaning the filters:
1.
Unscrew the wide-mesh filter and the fine-mesh filter by turning 
them clockwise, and remove them.
2.
Remove any food residues and wash the filters under running 
water.
3.
Replace the filter unit and fix the wide-mesh and fine-mesh filters 
by turning counter-clockwise.
4.
Make sure that the filters have been inserted correctly.
Do not operate the dishwasher without filters and check that the 
filter unit is correctly assembled to ensure good wash...