Home > Whirlpool > Dishwasher > Whirlpool Adg 6556 Wh Manual

Whirlpool Adg 6556 Wh Manual

Add to Favourites
    Download as PDF

    View the Whirlpool Adg 6556 Wh Manual for free. All the Whirlpool manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 10 GBCONTENTS BEFORE USING THE DISHWASHERPAGE11 PROTECTING THE ENVIRONMENTPAGE11 PRECAUTIONS AND GENERAL RECOMMENDATIONSPAGE11 CONNECTIONSPAGE12 ELECTRICAL CONNECTIONPAGE13 HOW TO FILL THE SALT CONTAINERPAGE14 HOW TO FILL THE RINSE AID DISPENSERPAGE15 HOW TO FILL THE DETERGENT DISPENSERPAGE16 CARE AND MAINTENANCEPAGE17 To make the most of your new dishwasher, please read these user instructions and the quick reference guide carefully.
    Page 2 11 1. Removing the packaging and check After unpacking, make sure that the dishwasher is undamaged and that the door closes correctly. If in doubt, contact a qualified technician or your local retailer. • Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous.2. Water and electrical connections All water and electrical connections must be carried out by a qualified technician in compliance with the manufacturers...
    Page 3 12Do not use the dishwasher if it has been damaged in transit. Consult your local retailer or our After-Sales Service. (Refer to the separate installation instructions booklet) Water inlet and drain:  Observe any special regulations issued by your local Water Board.  Make sure the inlet and drain hoses are kink- free and are not crushed.  If the hose length is not sufficient, please contact your local dealer or our After-Sales Service.  The inlet hose must be securely screwed on to the water...
    Page 4 13 For Great Britain Only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows: 1.Remove the fuse cover (A) and fuse (B). 2.Fit replacement 13A fuse into fuse cover. 3.Refit both into plug. Important: The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used...
    Start reading Whirlpool Adg 6556 Wh Manual

    Related Manuals for Whirlpool Adg 6556 Wh Manual

    All Whirlpool manuals