Whirlpool Awe 7629 Programme Chart Manual

							GB
5019 312 11028*
ProgrammeCareLabels
Max.Load
kg
Type of wash / Notes
- for temperature selection, respect the manufacturer's recommendations on the care label
Detergents and AdditivesSpecial optionsMax.Spin Speed
rpm
Pre- washMain WashSoftenerClean+Eco
Eco
Pre-washPrelava.
StartdelayIniciodiferido
IntensiverinseExtraacl./enx.
RinseHoldParo cuballena/cheia
VariablespinCentrif.
Cotton / Antibacterial40 - 60 - 95°C
     Algod.40 - 60 - 95°C6.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.
iYes 1)ii 4)iii 2)iiimax.
Baby40°CBaby40°C5.0Normally soiled baby clothes, baby quilts, beddings and blankets as well as washable toys made of cotton and/or linen. In this programme, the washing liquid is rinsed out particularly thoroughly and thus helps to protect sensitive baby skin.iYes 1)ii–ii 2)–iimax.
Synthetics30 - 40 - 60°CSintéticos30 - 40 - 60°C3.0Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon).iYes 1)iiiii 2)iii1000 3)
Daily load40°C        Diario40°C3.0Slightly to normally soiled textiles made of cotton and/or synthetics.–Yesi–––i 2)iiimax.
Delicates30°CDelicados30°C1.5Curtains and delicate clothing, dresses, skirts, shirts and blouses.iYes 1)i––ii 2)–ii1000 3)
AquaEco40°CAquaEco40°C2.5Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.Saving programme with very low water consumption. Use liquid detergent and the lowest recommended amount for 3 kg laundry. Do not use softener.–Yes––––i 2)–iimax.
Quick wash 15'30°CRápido30°C3.0Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton. Use lowest recommended detergent amount.–Yesi–––i 2)–iimax.
WoolCold - 40°CLana/lãFrío - 40°C1.0Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.This programme (40ºC) is tested and approved by The Woolmark Company for machine washable wool.–Yesi–––i 2)–ii1000 3)
Handwash40°CA mano/mão40°C1.0Textiles made of silk, linen, wool and viscose marked as “handwashable”.This programme (40ºC) is tested and approved by The Woolmark Company for handwashable wool.–Yesi–––i 2)–ii400 3)
SuperEco60°C60°C6.0
Heavily soiled and robust laundry made of cotton, synthetics and their blends. Economical energy consumption by prolonged wash duration - ideal to be run overnight to profit from more favourable energy rates. Avoid noise of spinning at night by setting the spin speed to “0” and start spin programme in the morning, or by defining programme start with “Start delay ” accordingly. - For garments with a high share of synthetic fibres, we recommend to use a laundry net.
–Yesi–––i 2)iiimax.
Rinse & SpinAclar./enx. & Centrif.–6.0Same as the last rinse and the final spin in the “Cotton” programme.––i–––iiiimax.
SpinCentrif. Intensivo–6.0In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.––––––i––imax.
DrainDesagüe/Drenag.––Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.––––––i––––
A. Programme selector
B. Time display
C. “Start delay ” button
D. “ Variable spin” button
E. “Start/Pause” button
F. Programme sequence indicator
G. “Reset” button
H. “Door open” indication
Whirlpool is a registered trademark of Whirlpool USA.
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately:I. “Service” indicationJ. “Water tap closed” indicationK. “Clean pump” indication
1) Do not use liquid detergent for main wash if you  have activated prewash option.2) Do not use liquid detergent.3) For improved garment care, spin speed is restricted  in these programmes.4) Only selectable up to 60°C.
PROGRAMME CHART
A
BHF
E
G
CD
J
IK
Yes = dosing required / i = optionalThe wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash”provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.M0703
 
						

							5019 312 11028*
ProgrammeTemperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. ProgrammeDuration(hours : minutes)Cotton/Antibacterial956.055*1.902:00Cotton606.0481.142:30Cotton with Eco**606.0480.903:30Cotton with Eco**603.0350.782:30Cotton406.0480.702:30Cotton**403.0350.572:05Baby405.0640.702:43Synthetics603.054*0.901:40Synthetics403.0480.551:25Daily load403.0400.451:00Delicates301.5500.550:41AquaEco402.5190.451:00Speed15'303.0300.150:15Wool401.0550.550:45Handwash401.0400.550:35SuperEco606.0550.784:00
CONSUMPTION DATA
Whirlpool is a registered trademark of Whirlpool USA.
1. Load the machine, close the drum doors and check that they are properly locked.2. Add detergent and additives into the dispenser to no more than the “MAX” level mark, as follows:• Programme with pre and main wash• Main wash programme without prewash• Fabric softeners and conditioners• Stain remover agents• Anti-scale agents (if necessary)3.  Close the lid.4. Turn the programme selector to the desired programme and temperature. The time display shows the duration of the chosen programme (in hours and minutes), and the lamp next to the “Start Pause” button flashes. The indication lamp of the predefined spin speed lights up.
PREPARATION OF THE WASH CYCLE
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the lid can be opened. As long as a wash programme is running, the lid remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel a running programme before the end”.
• Prolongs the programme by approx. 5 to 15 minutes.• Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!“Eco” button• With a modified temperature profile and a slightly  prologned washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.“Prewash” button• Only for heavily soiled loads (for example sand,  granular dirt) sensible. Increases the cycle time by approximately 20 min.“Intensive Rinse” button• The amount of water is increased to ensure a more  intensive rinse.• This option is particularly suitable for areas with very  soft water, washing baby linen and people with skin allergies.“Rinse Hold” button• The laundry remains in the last rinse water without  progressing to the final spin cycle to avoid creasing and prevent colours from changing.• This option is particularly recommended for the  “Synthetics”, “Daily load” and  “Delicates” programmes.• It is useful if you want to postpone spinning to a later time, or if you want to drain out only.• If you select “Rinse Hold”, do not leave items to soak for too long.• As soon as the appliance stops in the rinse hold, the “Rinse hold” lamp of the sequence indicator lights up and the lamp next to the “Start/Pause” button flashes.Terminate the “Rinse Hold” option:• Press the “Start/Pause” button; the programme  will terminate automatically with the final spin cycle for the present wash programme.• If you do not wish to spin the clothes, turn the  programme selector knob to the “Drain” programme and press the “Start/Pause” button.
PROGRAMME START
Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. When the programme phrase is finised, the corresponding indication goes out.
• Note: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.
PROGRAMME END
• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.1. Turn the programme selector to the “Off/O”  position.2. Close the water tap.3. Open lid and drum and unload the machine.4. Leave the lid open for some time to allow the  interior of the machine to dry.
CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the  programme. The light flashes.
2. Select the new programme, any options and another  spin speed if you want.
3. Press the “Start/Pause” button again. The new  programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
CANCEL A RUNNING PROGRAMME BEFORE THE END
The “Reset” button cancels a programme before the end. Press the “Reset” button for at least 3 seconds. Any existing water is drained out before the door can be opened.
SELECT THE DESIRED OPTION(S)
Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.“Clean+” button• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.• Selectable for programmes “Cotton” and “Synthetics”; choose temperature of 30 or 40°C and use with maximum load.• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.
START DELAY
The “Start delay ” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper.
• Select programme, spin speed and options.• Press the “Start Delay ” button several times to  select a delay time up to 23 hours.• Start the programme (see “Progremme Start”).  The indication lamp over the “Start delay ” button lights up and goes off when the programme starts.• Once having pressed the “Start/Pause” button,  the countdown of the time delay begins. The time delay indication on the display disappears when the programme starts and is replaced by the remaining time.• After the “Start/Pause” button has been pressed,  the number of hours preselected can be reduced by pressing again the “Start delay ” button.To cancel the “Start delay ”..before you press the “Start/Pause” button:• Turn the programme selector to another position  or press the “Reset” button...after having pressed the “Start/Pause” button:• Press the “Reset” button for at least 3 second. The  start delay indicator light goes off.
“ Variable spin” button• Every programme has a predefined spin speed.• Press the button to set another spin speed.• If spin speed “0” is selected, the final spinning is  cancelled but intermediate spin peaks remain during the rinse. The water is drained out only.
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.W ater and energy consumption refer to the default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation c onditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use).*  To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.**  Reference Programmes for Energy Label.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the “Troubleshooting Guide” in your Instructions for Use.
“Service”Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your “Instructions for Use”; if the fault persists, contact our After Sales Service.
“Water tap closed”The appliance has no or insufficient water supply. Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.
“Clean pump”Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).