Whirlpool Awm 1011 Programme Chart Manual

							GB AWM 1011 PROGRAMME CHART
5019 301 152281)
For improved garment care, spin speed is restricted in these programmes.
Whirlpool is a registered trademark of Whirlpool USA
The wool cycle of this machine has been tested and approved by The Woolmark Company for the washing of Woolmark 
garments labelled as “machine wash” provided that the garments are washed according to the instructions on the garment 
label and those issued in this programme chart.  M0805
Programme
Care
labels
Type of wash/Notes
- Respect the manufacturer’s recommendations on the care label.
Max.
Load
kg
Detergent and additives
Special Options and Modifiers
Max.
Spin
Speed
rpm
Te m p e -
rature
°C
Pre-
wash
Main
wash
Softener
Start
delay
Eco
Easy
ironing
Rinse
hold
Rinse
sensitive
skin
Intensive
rinse
Pre-
wash
Clean +
SoiledHeavy
soil
Cotton /
(Antibacterial)
 
 
Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
At a temperature of 95°C, this programme eliminates bacteria, ensuring sanitization of your laundry. 
The bacteria removal efficiency has been tested following a similar methodology  to the NF EN 13697 
standard of Nov. 2001.
11.0
❉
Ye s
❉❉❉❉ ❉ ❉ ❉ ❉❉ ❉
1200 20 to 95
Coloured
 
Slightly to normally soiled bed linen, table linen, shirts, trousers etc. made of cotton and linen.
10.0
❉
Ye s
❉❉❉❉ ❉ ❉ ❉ ❉❉ ❉
1200 20 to 40
Synthetics
 
 
Slightly to normally soiled blouses, shirts etc. made of polyester (Diolen, Trevira), polyamide (Perlon, 
Nylon) or blends with cotton.
5.5
❉
Ye s
❉❉❉❉ ❉ ❉ ❉ ❉❉ ❉
1000
1)20 to 60
Jeans
Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers 
and jackets.
11.0
❉
Ye s
❉❉❉—
❉❉ ❉❉❉❉
1200 20 to 60
Daily
 
 
Programme for slightly to normally soiled fabrics made of cotton and/or synthetic fibres.
6.0
—
Ye s
❉❉❉❉ ❉ ❉ ❉—
❉—
1200 20 to 60
Quick wash
 
Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and blends with cotton.
6.0
—
Ye s
❉❉—— —
❉❉—
❉—
1200 20 to 30
Outdoor
 
Normally soiled and sweaty sportswear made of cotton jersey or microfibres.
This programme includes a prewash cycle - you can add detergent also to the prewash chamber. Do 
not add any softener.
5.5
❉
Ye s
—
❉——
❉❉ ❉❉——
1000
1)20 to 60
Big items
 
 
Blankets made of synthetic fibres, bedcovers filled with polyester or other artificial fibres, sleeping 
bags, bathmats and similar items.
4.0
❉
Ye s
❉❉❉—
❉❉ ❉❉—
❉
1000
1)20 to 95
Delicates
 
Curtains and delicate dresses, skirts, shirts and blouses.
4.0
❉
Ye s
❉❉—
❉❉❉ ❉❉❉—
1000
1)20 to 40
Wool
Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine washable 
wool.
3.0
—
Ye s
❉❉——
❉❉ ❉—— —
1000
1)20 to 40
Handwash
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse hold” do not leave items to soak for too long. A very gentle spin is used in this 
programme.
3.0
—
Ye s
❉❉——
❉❉ ❉—— —
800
1)
20 to 30
SuperEco
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and/
or linen.
Offers highest economy in energy consumption by prolonged wash duration. Ideal to be run overnight to 
additionally profit from the more favourable energy rates. To avoid noise of spinning at night, select “Rinse 
hold” option and start spinning in the morning, or define programme start with “Start delay ” accordingly.
11.0
—
Ye s
❉❉——
❉❉ ❉—
❉—
1200 20 to 60
Gentle Spin
—
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
3.0
—— —
❉—— —
❉❉—— —
1000
1)
—
Rinse & Spin
—
Same as the last rinse and the final spin in the “Coloured” programme.
11.0
——
❉❉—— —
❉❉—— —
1200
—
Drain & Spin
—
Use this programme to drain your washer or to drain and spin your wash load.
Delicate fabrics, handwashables and woolens should be drained with no spin or low spin speed to avoid 
fabric stress.
11.0
—— —
❉—— — — — — — —
1200
—
A. “On/Off” button
B. Programme selector
C. “Start (Pause)” button
D. Option buttons
E. Modifiers
F. “Start delay” button
G. “Favourites” button
H. “Reset (Drain)” button
I. Programme sequence indicator
Selecting any option the indication lights up. When 
the combination of programme, additional options/
modifiers and temperature is not possible, the 
indication lights switch off automatically and a 
signal sounds.❉ : optional / Yes: dosing required.
F
C
G
B
A
H
D}E
}
I
 
						

							Whirlpool is a registered trademark of Whirlpool USA
5019 301 15228
Add the detergent as described in the programme table or in the 
chapter “Detergent and Additives” in your Instructions for Use.
1. Press 
“On/Off”   to switch on the washer. The light of the selected 
programme is on, and the 
“Start (Pause)” button   blinks.
2. Turn the 
programme selector to the desired programme - 
it is marked by a light.
3. The predefined 
temperature and 
spin speed can be altered 
by pressing the “Temperature”   and the “Spin speed” 
 modifier.
Selecting any option or modifier, the indication lights up. If the 
combination of programme, options or modifiers is not possible, 
the indication lights switch off automatically and a signal sounds.
“Eco” button
 The duration of the wash is extended and the temperature 
reduced. This saves you energy and maintains good washing results.
“Easy ironing” button
 Reduces creasing by increased water quantity and a very gentle spin. 
“Rinse hold” button
 The laundry remains in the last rinse water without being spun: 
this prevents creasing and colours from changing.
 This option is particularly recommended for the programme 
“Synthetics” or “Delicate”. Particularly useful if you want to postpone spinning to a later 
time, or if you want to drain only.
 Do not leave the laundry to soak in the rinse hold for too long.
Note: The programme starts to “Rinse hold” when the “Rinse hold” 
button light blinks; the 
“Start (Pause)” button light   also blinks.
Terminate the “Rinse hold” option  :
 Press the “Rinse hold” or the 
“Start (Pause)” button  ; the 
programme will terminate automatically with the final spin 
cycle for the present wash programme.
 If you do not wish to spin the clothes,  press and hold the 
“Reset (Drain)” button   for a few seconds. The water 
is drained out then, before the door can be opened.
“Spin speed” modifier
 Every programme has an automatic predefined  spin speed.
 Press the button to set another spin speed.
 Spin speed “0” is only selectable for programme “Spin & 
Drain”; the final spinning is cancelled in this case - the water is 
drained out only at the end of the programme.
“Rinse” modifier 
 “Sensitive skin”: maximum amount of rinse water is added, and 
rinse cycle is prolonged.
 “Intensive rinse”: more rinse water is added, and rinse cycle is 
prolonged.
 Particularly suitable for areas with very soft water, for baby 
clothes or to help people with skin allergies.CONSUMPTION DATA
Programme
Te m p e r a t u r e
(°C)
Load
(kg)
Wa t e r
(l)
Energy
(kWh)
Approximate programme duration
*
(hours : minutes)
Cotton (Antibacterial) 95 11.0 95
**3.38 3:10
Cotton with “Eco”
***
60 11.0 86 1.87 2:51
Cotton 60 11.0 89.2 1.92 2:15
Cotton 60 5.5 55 1.22 1:40
Cotton 60 3.5 45.5 1.03 1:25
Cotton 60 1.0 35 0.73 1:00
Coloured 40 10.0 82 0.89 2:13
Coloured 40 5.5 57 0.69 1:39
Coloured 40 3.5 43.3 0.58 1:27
Coloured 40 1.0 26.1 0.39 0:40
Synthetics 40 5.5 53.1 0.62 1:35
Synthetics 40 3.0 42.1 0.60 1:23
Jeans 40 11.0 117.5 0.97 2:00
Daily 40 6.0 60.9 0.81 1:00
Quick wash 30 6.0 43.8 0.44 0:30
Outdoor 30 5.5 61.3 0.51 1:31
Big items 40 4.0 83.7 0.83 1:18
Delicates 30 4.0 79.6 0.50 0:52
Wool 40 3.0 68.6 0.78 0:43
Handwash 30 3.0 97 0.49 0:38
SuperEco 60 11.0 96.1 1.46 5:09
Prewash cycle increases programme duration by approximately 15 min. Consumption values were measured in normalized conditions in compliance 
with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure 
and temperature, the load and the type of wash.*
The remaining time indicator can deviate from the values in the table, because it takes into account the operating conditions at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
  Reference programme for energy label (Cotton 60° with “Eco” and default settings).
ADD DETERGENT, CLOSE THE DOOR AND 
SELECT THE PROGRAMMESELECT ANY DESIRED OPTION OR MODIFIER
“Options” modifier
 Prewash  :
 Adds a prewash cycle to the programme selected.
 Use only for heavily soiled loads (e.g. sand, granular dirt).
 Increases the cycle time by approx. 15 minutes.
 Do not use liquid detergent for the main wash when activating 
“Prewash”.
 Clean + 
 Choose this option if you use an in-wash additive for stain 
removal (powder, for example Vanish).
 Optimizes the additives efficiency to get better wash 
performance and stain removal.
 Select temperature of 30 or 40°C and use with maximum load.
 Add an appropriate amount of in-wash additive for stain 
removal (powder) to the prewash chamber.
 Appropriate for use of stain removers and bleaches on oxygen 
basis. 
Chlorine or perborate bleaches must not be used!
 Normal
“Soil level” modifier 
 Adapts the programme duration to the soil level of your laundry.
If there is a programme setting which you use frequently, the 
washing machine offers the possibility to save one setting for each 
programme so that it can be used again by just pushing one button.
 Select the desired programme, temperature, spin speed and 
options/modifiers.
Press and hold the 
“Favourites” button   for some seconds; the 
light goes on and a signal sounds when the programme setting is saved.
Next time you want to use your individual programme setting, turn the 
programme selector to the desired programme, 
shortly push the 
“Favourites” button   and start by pressing 
“Start (Pause)” .
If you want to replace the saved setting by another one:
 Select the programme desired and the new temperature, spin, 
options/modifer setting.
Press and hold the 
“Favourites” button   for at least 3 
seconds; the previously saved  setting is replaced by the new one.
The “Start delay”   allows to run the machine at the consumer’s 
convenience, for example at night when electricity is cheaper.
 Select programme, temperature and options/modifiers as desired.
 Press the “Start delay ” button to select the delay time by 1 to 24 hours;
Press and hold the 
“Start (Pause)” button  ; the 
countdown of the delay time begins. The light of the “Start 
delay ” button will keep blinking until the programme starts.
 The time delay indication disappears when the programme 
starts and it is replaced by the remaining time.
To cancel the “Start delay”:
Press 
“Reset (Drain)”   for at least 3 seconds, or set the 
delay time to “0:0” - the delay time will disappear from the 
display after a few seconds.Turn on the tap and press and hold the 
“Start (Pause)” button   
- the buttons light stops blinking and goes on; it will take some time 
until water enters into the washing machine.
The programme sequence indicator on the display shows the 
sequence reached in the programme. After starting the 
programme, the indication runs from left to right through “Add 
garment”, prewash, wash, rinse, spin. When a programme 
sequence is finished, the corresponding symbol goes off.
The display shows the remaining programme time. Due to 
variations in load and temperature of inlet water, the remaining 
time is newly calculated in certain programme phases. If this is the 
case, an animation appears on the display and the and the “6
th 
Sense” symbol   lights up.
As soon as a programme starts, the “Door locked” symbol   lights 
up on the display.
You can interrupt the programme by pressing 
“Start (Pause)”  
- the light blinks. The “Door locked” symbol   on the display goes 
off and you can open the door. In certain programme phases, the 
“Door locked” symbol   remains lit to show that the door cannot 
be opened in the present programme phase, e.g. when the water 
level is too high or during spinning.
As long as the “Add garment” symbol   lights up on the display, 
you can add more washing: press 
“Start (Pause)” , open the 
door, add your washing, close the door and press 
“Start (Pause)” 
 to continue the programme.
“End” appears on the display, and a signal sounds.
1. Switch the machine off by pressing 
“On/Off” .
2. Turn off the tap and open the door to unload your washing. Leave 
the door open for some time so that the washer’s inside can dry.
1. Press the 
“Start (Pause)” button   to interrupt the 
programme. The light blinks.
2. Select the new programme, temperature and options/
modifiers as desired.
3. Press the
 “Start (Pause)” button   again. The new 
programme continues at the same position where the 
previous programme was interrupted. Do not add detergent 
for this programme.
Press and hold the 
“Reset (Drain)” button   for a few 
seconds; the light blinks. It will take some time until any existing 
water is drained out and the door can be opened (up to 10 
minutes). Caution, the washing could still be hot!
SAVE YOUR FAVOURITE PROGRAMMES START DELAY ➡➡➡
PROGRAMME STARTADD WASHING/DOOR LOCKPROGRAMME ENDCHANGE THE PROGRAMME,  TEMPERATURE, 
OPTIONS AFTER PROGRAMME STARTRESET A RUNNING PROGRAMME BEFORE 
THE END