Home > Whirlpool > Washing Machine > Whirlpool Awod 6527 Programme Chart Manual

Whirlpool Awod 6527 Programme Chart Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Whirlpool Awod 6527 Programme Chart Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 415 Whirlpool manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    GB
    ProgrammeTempe-ratureCare LabelsMax.Load
    kg Type of wash / Notes- respect the manufacturer's recommendations on the care label
    Detergents and AdditivesSpecial optionsMaxSpin Speed
    rpm
    Pre- washMain 
    WashSoftenerClean+ Pre-washStartdelayEasyironingIntensiverinseRinseholdVariablespin
    Antibacterial70 - 95 °C6.0
    Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
    At the temperature “Cotton 80° or more, this programme eliminates bacteria, 
    ensuring sanitization of your laundry. The bacterial removal efficiency has been 
    tested following a similar methodology to the NF EN 13697 standard of Nov
    . 
    2001
    YesMax.Cotton50 - 60 °C7.0
    Cotton20 - 40 °C5.0
    Synthetics20 - 60 °C2.5Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, 
    Trevira), polyamide (Perlon, Nylon) or blends with cotton.Yes1000 1)
    Daily load20 - 60 °C3.0Slightly to normally soiled textiles made of cotton and/or synthetics.–
    Yes––Max.
    Quick wash20 - 30 °C3.0Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.–
    Yes––––Max.
    Delicates20 - 40 °C1.5Curtains and delicate clothing, dresses, skirts, shirts and blouses. Yes–––1000 1)
    SuperEco20 - 60 °C6.0Slightly to normally soiled bed linen, table linen and underwear
    , towels, 
    shirts etc. made of cotton and/or linen.Offers highest economy in energy consumption by prolonged wash duration. Ideal to be 
    run overnight to additionally profit from the more favourable energy rates. T o avoid noise 
    of spinning at night, set spin speed to “0” and start spin programme in the morning, or 
    define programme start with “Start Delay ” accordingly. 
    –Yes–––Max.
    Lingerie20 - 30 °C1.0This programme is particurarly suitable to treat delicate lingerie (use of laundry net strongly recommended).–Yes––––400 1)
    Wool20 - 40 °C1.0Only woollens labelled with the woolmark and identified as machine washable. This programme (40°) is tested and approved by The Woolmark Company for machine washable wool.–Yes––––1000 1)
    Handwash20 - 40 °C1.0Textiles made of linen, silk, wool and viscose marked as “handwashable”.
    This programme (40°) is tested and approved by The Woolmark Company for hand-washable wool.–
    Yes––––400 1)
    Rinse & Spin––6.0Same as the last rinse and the final spin in the “Cotton” programme.–––– –Max.
    Spin––6.0In this programme spinning is intensive. Same as the spin cycle in the “Cotton ” programme.––––––––Max.
    Gentle Spin––1.0In this programme spinning is gentle. Same as the spin cycle in the “
    Wool” programme.––––––––1000 1)
    Drain–––Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.––––––––––
    A.  “Door open” indication
    This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage 
    and react appropriately, e.g.:
    B.  “Service” indication
    C.  “Water tap closed” indication
    D. “Clean pump” indication E.  Programme selector
    F.  “Start/Pause” button
    G. Variable spin speed button
    H. Programme sequence indicator
    I.  “Reset” button
    J.  “Start delay ” button
    K.  “Temperature” button
    L.  Display
     :  option / Yes : dosing required1)  For improved garment care spin speed is restricted in these programmes.
    PROGRAMME CHART
    A
    B
    H
    FE
    G
    C
    D
    J
    I
    K
    5019 301 01080
    Whirlpool is a registered trademark of Whirlpool USA.
    L
    The wool and handwash cycles of this machnes have been tested and approved by The W
    oolmark Company for the washing 
    of Woolmark garments labeled as “machine wash” or “hand wash” provided that the garments are washed according to  the 
    instructions on the garment label and those issued in this programme chart.                                  M0619
     
    						
    							
    5019 301 01080
    Whirlpool is a registered trademark of Whirlpool USA.
    ProgrammeTemperature(°C)
    Load
    (kg)Water(l)
    Energy
    (kWh)Approx. ProgrammeDuration(hours : minutes)*
    Antibacterial956.059**1.902:00
    Cotton ***607.0541.192:20
    Cotton405.0560.702:00
    Synthetics602.550**0.801:35
    Synthetics402.5460.501:20
    Daily load403.0410.501:00
    Quick wash303.0410.400:30
    Delicates301.5600.500:45
    SuperEco606.0510,724:00
    Lingerie301.0450.400:36
    Wool
    401.0600.500:45
    Handwash401.0450.500:40
    CONSUMPTION DATA
    Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
    *  The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
      applicable at that time.
    **  T
    o reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.***  Reference Programme for Energy Label.
    ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME
    SELECT ANY DESIRED OPTION
    “DOOR OPEN” INDICATION
    Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account  be forced open. In case you have an urgent need to open it during a 
    running programme, refer to “Cancel (Reset) a running 
    programme before the end”.
    RED INDICATIONS
    “Service”Lighting up of the “Service” indication can be caused 
    by a fault in an electrical component. Refer to the 
    “Troubleshooting Guide” in your “Instructions for Use”; 
    if the fault persists, contact our After Sales Service.
    “Water tap closed”
    The appliance has no or insufficient water supply. Open 
    the water tap: if the indications still lights up, refer to the 
    “Troubleshooting Guide” in the Instructions for Use.
    “Clean pump”
    Waste water is not pumped out. Check whether the 
    drain hose is kinked or the filter must be cleaned: in the 
    latter case refer to the Instructions for Use (“Removing 
    the Filter”).
    Push the button(s) of any option(s) desired - the respective indication lamp lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off 
    automatically. Unsuitable combinations of options are 
    deselec ted automatically.
    “Clean+” button• Choose this option if you use an in-wash additive for  stain removal (powder, for example “Vanish”) - it will  optimize the additive’s efficiency to get better wash 
      performance and stain removal.
    •   Selectable for programmes “
    Cotton” and “Synthetics”; 
      choose temperature of 30 or 40°C and use with 
      maximum load.
    •   Add an appropriate amount of in-wash additive for 
    PROGRAMME START
    Open the tap and press the  “Start/Pause” button. The indication lamp next to the  “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right 
    through Wash, Rinse, Spin/Drain.
    The time display shows the remaining programme time. Due to variations in load and temperature of inlet 
    water, the remaining time is newly calculated in certain 
    programme phases. If this is the case, an animation 
    appears on the time display.
    PROGRAMME END
    •  All the lights of the programme sequence indicator
      are off, and the “Door open” indication lights up.
    1.  Turn the programme selector to the “Off/O”  position.
    2.  Close the water tap.
    3.  Open the door and unload the machine.
    4.  Leave the door ajar to allow the drum to dry.
    CHANGE PROGRAMME AND/OR OPTIONS 
    AFTER PROGRAMME START
    1.  Press the “Start/Pause” button to pause the 
      programme. The lamp blinks.
    2.  Select the new programme, temperature, any
      options and another spin speed if you want.
    3.  Press the  “Start/Pause” 
    button again. The new
      programme continues at the same position where
      the previous programme was interrupted. Do not
      add detergent for this programme.
    CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END
    The  “Reset” button cancels a programme before the end.•  Press the  “Reset” button for at least 3 seconds;  
      “rES” appears on the display. Any existing water is 
      drained out before the door can be opened.
      stain removal (powder) to the main wash chamber
    ,   together with your detergent (only use powder 
      detergent with this option). 
      Respect the manufacturer’s dosing instructions.•  Prolongs the programme by approx. 10 to 15 minutes.•   Appropriate for use of stain removers and bleaches 
      on oxygen basis. 
     Chlorine or perborate bleaches must not be used!
    “Prewash” button•  Only for heavily soiled loads (for example sand, 
      granular dirt) sensible. Increases the cycle time by  
      approximately 15 min.
    • Do not use liquid detergent for the main wash when 
      activating the  “Prewash” option.
    “Easy ironing” button•  Can be used together with “Cotton”, “Synthetics”
      and “Daily load” programmes to make ironing easier.
    •  Increases the water quantity and the clothes are spun   
      very gently.
    “Intensive rinse” button•  More water is added and rinse cycle is prolonged.•  This option is particularly suitable for areas with very 
      soft water, washing baby linen and helps people with 
      allergies.
    “Rinse hold” button
    •  The laundry remains in the last rinse water without  
      pregressing to the final spin cycle to avoid creasing and 
      prevent colours from changing.
    •  This option is particularly recommended for the
     programmes “Synthetics”, “Daily load” and “Delicates”.•  It is particularly useful if you want to postpone
      spinning to a later time, or if you want to drain only.
    The “Start delay ” allows to run the machine at the 
    consumer’s convenience, for example at night when 
    electricity is cheaper.  
    Do not use liquid detergent when 
    activating “Start delay ”.
    •  Select programme, temperature and options.•  Press the “Start delay ” button to select the delay time 
      by 1 to 23 hours.
    •  Press the “Start/Pause” button. 
      The countdown of  the delay time begins; the “Start 
      delay ” indication lamp and the dot on the display will 
      keep blinking until the programme starts.
    •  The time delay indication disappears when the
      programme starts and it is replaced by the remaining 
      programme time.
    •  Once having pressed the “Start/Pause” button, the 
      number of hours preselected can be reduced by
      pressing again the “Start delay ” button. From 1 hour 
      on, the delay time can also be reduced in steps of 10  
      minutes.
    To cancel the “Start delay ”
    ...before you press the “Start/Pause” button:•  Turn the programme selector to another position or 
      press the  “Reset” button....after having pressed the “Start/Pause” button:•  Press the “Reset” button for at least 3 seconds - the
      start delay time disappears from the time display.
    START DELAY
    Add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.
    1. Turn the programme selector to the desired
      programme. The display  shows  the programme 
      duration in hours and minutes as well as the 
      predefined temperature. The “ Start/Pause
    ” 
      indication lamp blinks.
    2. The 
    temperature can be altered by pressing the 
      “Temperature” knob.
    3. The indication lamp of the predefined
     spin speed 
      lights up;  in case you want to set another spin speed 
      press the “Spin speed” b
    uttton. •  If you select “Rinse hold” do not leave items to soak 
      for too long.
     Note: The programme stops to “Rinse hold” at the 
      time the “Rinse hold” lights in the preogramme
      sequence indication is on. The indication lamp next to    the “Start/Pause
    ” button blinks.
    Termina
    te the “Rinse hold” option:•  Press the  “Start/Pause” button; the programme will 
      terminate automatically with the final spin cycle for the 
      present wash programme.
    •  If you do not wish to spin the clothes, turn the
      programme selector knob to the “Drain” programme
      and press the 
    “Start/Pause” button.
    “ Variable spin”
     button•  Every programme has a predefined spin speed.•  Press the button to set another spin speed.•  If spin speed “0” is selected, the final spinning is
      cancelled but intermediate spin peaks remain during
      rinse. The water is drained out only.
     
    						
    All Whirlpool manuals Comments (0)

    Related Manuals for Whirlpool Awod 6527 Programme Chart Manual