Home > Whirlpool > Washing Machine > Whirlpool Awod 6727 Programme Chart Manual

Whirlpool Awod 6727 Programme Chart Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Whirlpool Awod 6727 Programme Chart Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 415 Whirlpool manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							GB PROGRAMME CHART
    5019 301 06148
    Whirlpool is a registered trademark of Whirlpool USA
    ❉:optional / Yes : dosing required
    1)
    For improved garment care, spin speed is restricted in these programmes.Programme
    Te m p e -
    rature
    Care
    Labels
    Max 
    Load
    kg
    Type of wash/Notes
    - Respect the manufacturer’s recommendations on the care label
    Detergents and additives
    Special options
    Max
    Spin
    Speed
    rpm
    Pre-
    wash
    Main
    wash
    Softener
    Clean+
    Pre-
    wash
    Start
    delay
    Easy
    ironing
    Intensive
    rinse
    Rinse
    hold
    Va r i a b l e  
    Spin
     Cotton
    70 - 95 °C
    7.0
    Normally to heavily soiled bed linen, table linen and underwear, towels, shirts 
    etc. made of cotton and linen.
    At a temperature of 80°C or more, this programme eliminates bacteria, 
    ensuring sanitization of your laundry. The bacteria removal efficiency has been 
    tested following a similar methodology to the NF EN 13697 standard of 
    Nov. 2001.
    ❉
    Ye s
    ❉❉❉❉❉ ❉❉❉
    max.
    Coloured Cotton
    20 - 60 °C
     
    7.0
    Synthetics
    20 - 60 °C
     
     
    3.0
    Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, 
    Trevira), polyamide (Perlon, Nylon) or blends with cotton.
    ❉
    Ye s
    ❉❉❉❉❉ ❉❉❉
    1000
    1)
    Daily load
    20 - 60 °C
     
    4.0
    Slightly to normally soiled textiles made of cotton and/or synthetics.
    —
    Ye s
    ❉——
    ❉❉ ❉❉❉
    max.
     Quick wash
    20 - 30 °C
    4.0
    Shortly worn outer clothing made of cotton, polyester, polyamide and blends 
    with cotton.
    —
    Ye s
    ❉——
    ❉——
    ❉❉
    max.
    Delicates
    20 - 40 °C
     
    1.5
    Curtains and delicate clothing, dresses skirts, shirts and blouses.
    ❉
    Ye s
    ❉—
    ❉❉——
    ❉❉
    1000
    1)
    SuperEco
    20 - 60 °C
    7.0
    Slightly to normally soiled bed linen, table linen and underwear, towels, shirts 
    etc. made of cotton and/or linen.
    Offers highest economy in energy consumption by prolonged wash duration. Ideal 
    to be run overnight to additionally profit from the more favourable energy rates. To 
    avoid noise of spinning at night, set spin speed to “0” and start spin programme in 
    the morning, or define programme start with “Start Delay ” accordingly.
    —
    Ye s
    ❉——
    ❉—
    ❉❉ ❉
    max.
    Lingerie
    20 - 30 °C
    1.0
    This programme is particularly suitable to treat delicate lingerie (use of a 
    laundry net strongly recommended).
    —
    Ye s
    ❉——
    ❉——
    ❉❉
    400
    1)
    Wool
    20 - 40 °C
    1.0
    Only woollens, labelled with the Woolmark and identified as machine 
    washable.
    —
    Ye s
    ❉——
    ❉——
    ❉❉
    1000
    1)
    Handwash 
    20 - 40 °C
    1.0
    Textiles made of linen, silk, wool and viscose marked as “handwashable”.
    —
    Ye s
    ❉——
    ❉——
    ❉❉
    400
    1)
    Rinse & Spin
    ——
    7.0
    Same as the last rinse and the final spin in the “Cotton” programme.
    ——
    ❉——
    ❉—
    ❉❉ ❉
    max.
    Spin
    ——
    7.0
    In this programme spinning is intensive. Same as the spin cycle in the “Cotton” 
    programme.
    —— — ——
    ❉———
    ❉
    max.
    Gentle Spin
    ——
    1.0
    In this programme spinning is gentle. Same as the spin cycle in the “Wool” 
    programme.
    —— — ——
    ❉———
    ❉
    1000
    1)
    Drain
    ———
    Drain only - no spinning. Alternative method of terminating programme after 
    “Rinse Hold”.
    —— — ——
    ❉—————
    A. “Door open” indication
    This washing machine is equipped with 
    automatic safety functions which 
    detect and diagnose faults at an early 
    stage and react appropriately, e.g.:
    B. “Service” indication
    C. “Water tap closed” indication
    D. “Clean pump” indication
    E. Programme selector
    F. “Start/Pause” button
    G. “Spin” button
    H. Programme sequence indicator
    I. “Reset” button
    J. “Start delay” button
    K. “Temperature” button
    L. Display
    DHC
    F
    I
    G E
    BA
    J
    L
    }
    K
    30106148GB.fm  Page 1  Friday, March 7, 2008  3:10 PM
     
    						
    							5019 301 06148
    Whirlpool is a registered trademark of Whirlpool USA
    Add detergent as indicated on the front page and as 
    described in the chapter “Detergent and Additives” in 
    your Instructions for Use.
    1. Turn the 
    programme selector to the desired 
    programme. The display shows the programme 
    duration in hours and minutes as well as the 
    predefined temperature. The 
    “Start/Pause” button 
    blinks.
    2. The 
    temperature can be altered by pressing the 
    “Temperature” button.
    3. The indication lamp of the predefined 
    spin speed 
    lights up; in case you want to set another spin speed, 
    press the “Spin” button.
    Push the button of any option desired - the respective 
    indication lights up.
    When the combination of programme and additional 
    option(s) is not possible, the indication lights switch off 
    automatically. Unsuitable combinations of options are 
    deselected automatically.
    “Clean+” button
     Choose this option if you use an in-wash additive for 
    stain removal (powder, for example “Vanish”) - it will 
    optimize the additive’s efficiency to get better wash 
    performance and stain removal.
     Selectable for programmes “Cotton” and “Synthetics”; 
    choose temperature of 30 or 40°C and use with 
    maximum load. Add an appropriate amount of in-wash additive for 
    stain removal (powder) to the main wash chamber, 
    together with your detergent (only use powder 
    detergent with this option). Respect the 
    manufacturer’s dosing instructions.
     Prolongs the programme by approx. 10 to 15 minutes.
     Appropriate for use of stain removers and bleaches on 
    oxygen basis. 
    Chlorine or perborate bleaches must 
    not be used!
    “Prewash” button
     Only for heavily soiled loads (for example sand, 
    granular dirt) sensible. Increases the cycle time by 
    approximately 15 min.
     Do not use liquid detergent for the main wash when 
    activating the Prewash option.
    “Easy ironing” button
     Can be used together with “Cotton”, “Synthetics” and 
    “Daily load” programmes to make ironing easier.
     Increases the water quantity and the clothes are spun 
    very gently.
    “Intensive rinse” button
     More water is added and rinse cycle is prolonged.
     This option is particularly suitable for areas with very 
    soft water, washing baby linen and helps people with 
    allergies.
    “Rinse hold” button
     The laundry remains in the last rinse water without 
    progressing to the final spin cycle to avoid creasing and 
    prevent colours from changing.
     This option is particularly recommended for the 
    programmes “Synthetics”, “Daily load” and 
    “Delicates”.
     It is particularly useful if you want to postpone spinning 
    to a later time, or if you want to drain only.CONSUMPTION DATA
    Programme
    Temperature 
    (°C)
    Load
    (kg)
    Water
    (l)
    Energy
    (kWh)
    Approx. Programme Duration
    (hours : minutes)
    *
    White Cotton / Antibacterial 95 7.0 74
    **2.10 2:10
    Cotton
    ***
    60
    7.0
    54
    1.19
    2:20
    Cotton 40 7.0 69 0.75 2:05
    Synthetics 60 3.0 46
    **0.80 1:35
    Synthetics 40 3.0 42 0.40 1:20
    Daily load 40 4.0 48 0.50 1:00
    Quick wash 30 4.0 48 0.25 0:30
    Delicates 30 1.5 60 0.50 0:45
    SuperEco 60 7.0 69 0.84 4:00
    Lingerie 30 1.0 45 0.45 0:40
    Wool 40 1.0 60 0.55 0:45
    Handwash 40 1.0 45 0.55 0:40
    Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home 
    may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
    *The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions 
    applicable at that time.
    **To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
    ***Reference Programme for Energy Label.ADD DETERGENTS, CLOSE THE DOOR 
    AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
     If you select “Rinse hold”, do not leave the laundry to 
    soak for too long.
    Note: The programme stops to “Rinse hold” at the 
    time the “Rinse hold” light in the programme sequence 
    indicator is on. The indication lamp next to the 
    “Start/
    Pause” button blinks.
    Terminate the “Rinse hold” option:
     Press the 
    “Start/Pause” button; the programme will 
    terminate automatically with the final spin cycle for the 
    present wash programme.
     If you do not wish to spin the clothes, turn the 
    programme selector knob to the “Drain” programme 
    and press the 
    “Start/Pause” button.
    “Spin” button
     Every programme has a predefined spin speed.
     Press the button to set another spin speed.
     If spin speed “0” is selected, the final spinning is 
    cancelled but intermediate spin peaks remain during 
    rinse. The water is drained out only.
    The “Start Delay” allows to run the machine at the consumer’s 
    convenience, for example at night when electricity is cheaper. 
    Do not use liquid detergent when activating the “Start Delay”.
     Select programme, temperature and options.
     Press the “Start Delay ” button to select the delay time 
    by 1 to 23 hours;
     Press the 
    “Start/Pause” button. 
    The indication light next to the “Start Delay ” button 
    lights up and the countdown of the delay time begins. 
    The dot between hours and minutes of the indicated 
    delay time as well as the light of the start delay button 
    will keep blinking until the programme starts.
     The time delay indication disappears when the 
    programme starts and it is replaced by the remaining 
    programme time.
     Once having pressed the 
    “Start/Pause” button, the 
    number of hours preselected can be reduced by 
    pressing and holding the “Start Delay ” button. From 1 
    hour on, the delay time can also be reduced by minutes.
    To cancel the “Start Delay ”
    ..before you press the “Start/Pause” button:
     Turn the programme selector to another position or 
    press the 
    “Reset” button.
    ..after having pressed the “Start/Pause” button:
     Press the 
    “Reset” button for at least 3 seconds - the 
    start delay time disappears from the display.
    Open the tap and press the 
    “Start/Pause” button. The 
    indication lamp next to the 
    “Start/Pause” button lights 
    up. The programme sequence indicator shows the current 
    programme phase, running from left to right through 
    Wash, Rinse, Spin/Drain.
    The display shows the remaining programme time. Due to 
    variations in load and temperature of inlet water, the 
    remaining time is newly calculated in certain programme 
    phases. If this is the case, 
    an animation appears on the 
    display.Before starting and after end of a programme, the lamp 
    lights to show that the door can be opened. As long as a 
    wash programme is running, the door remains locked and 
    must on no account be forced open. In case you have an 
    urgent need to open it during a running programme, refer 
    to “Cancel (Reset) a running programme before the end”.
    “Service”
    Lighting up of the “Service” indication can be caused by a 
    fault in an electrical component. Refer to the 
    “Troubleshooting Guide” in your Instructions for Use; if 
    the fault persists, contact our After Sales Service.
    “Water tap closed”
    The appliance has no or insufficient water supply. Open 
    the water tap; if the indication still lights up, refer to the 
    “Troubleshooting Guide” in the Instructions for Use.
    “Clean pump”
    Waste water is not pumped out. Check whether the drain 
    hose is kinked or the filter must be cleaned; in the latter 
    case refer to the Instructions for Use (“Removing the 
    Filter”).
     All the lights of the programme sequence indicator 
    are off, and the “Door open” indication lights up.
    1. Turn the programme selector to the “Off/O” 
    position.
    2. Close the water tap.
    3. Open the door and unload the machine.
    4. Leave the door ajar to allow the drum to dry.
    1. Press the 
    “Start/Pause” button to pause the 
    programme. The light blinks.
    2. Select the new programme, temperature, any options 
    and another spin speed if you want.
    3. Press the 
    “Start/Pause” button again. The new 
    programme continues at the same position where the 
    previous programme was interrupted. Do not add 
    detergent for this programme.
    The 
    “Reset” button cancels a programme before the end.
     Press the 
    “Reset” button for at least 3 seconds. Any 
    existing water is drained out before the door can be 
    opened.START DELAYPROGRAMME START
    “DOOR OPEN” INDICATIONRED INDICATIONSPROGRAMME ENDCHANGE PROGRAMME AND/OR OPTIONS 
    AFTER PROGRAMME STARTCANCEL (RESET) A RUNNING 
    PROGRAMME BEFORE THE END
    30106148GB.fm  Page 2  Friday, March 7, 2008  3:10 PM
     
    						
    All Whirlpool manuals Comments (0)

    Related Manuals for Whirlpool Awod 6727 Programme Chart Manual