Whirlpool Awod 6927 Programme Chart Manual

							GB PROGRAMME CHART
5019 301 06148
Whirlpool is a registered trademark of Whirlpool USA
❉:optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.Programme
Te m p e -
rature
Care
Labels
Max 
Load
kg
Type of wash/Notes
- Respect the manufacturer’s recommendations on the care label
Detergents and additives
Special options
Max
Spin
Speed
rpm
Pre-
wash
Main
wash
Softener
Clean+
Pre-
wash
Start
delay
Easy
ironing
Intensive
rinse
Rinse
hold
Va r i a b l e  
Spin
 Cotton
70 - 95 °C
7.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts 
etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, 
ensuring sanitization of your laundry. The bacteria removal efficiency has been 
tested following a similar methodology to the NF EN 13697 standard of 
Nov. 2001.
❉
Ye s
❉❉❉❉❉ ❉❉❉
max.
Coloured Cotton
20 - 60 °C
 
7.0
Synthetics
20 - 60 °C
 
 
3.0
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, 
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
❉
Ye s
❉❉❉❉❉ ❉❉❉
1000
1)
Daily load
20 - 60 °C
 
4.0
Slightly to normally soiled textiles made of cotton and/or synthetics.
—
Ye s
❉——
❉❉ ❉❉❉
max.
 Quick wash
20 - 30 °C
4.0
Shortly worn outer clothing made of cotton, polyester, polyamide and blends 
with cotton.
—
Ye s
❉——
❉——
❉❉
max.
Delicates
20 - 40 °C
 
1.5
Curtains and delicate clothing, dresses skirts, shirts and blouses.
❉
Ye s
❉—
❉❉——
❉❉
1000
1)
SuperEco
20 - 60 °C
7.0
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts 
etc. made of cotton and/or linen.
Offers highest economy in energy consumption by prolonged wash duration. Ideal 
to be run overnight to additionally profit from the more favourable energy rates. To 
avoid noise of spinning at night, set spin speed to “0” and start spin programme in 
the morning, or define programme start with “Start Delay ” accordingly.
—
Ye s
❉——
❉—
❉❉ ❉
max.
Lingerie
20 - 30 °C
1.0
This programme is particularly suitable to treat delicate lingerie (use of a 
laundry net strongly recommended).
—
Ye s
❉——
❉——
❉❉
400
1)
Wool
20 - 40 °C
1.0
Only woollens, labelled with the Woolmark and identified as machine 
washable.
—
Ye s
❉——
❉——
❉❉
1000
1)
Handwash 
20 - 40 °C
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
—
Ye s
❉——
❉——
❉❉
400
1)
Rinse & Spin
——
7.0
Same as the last rinse and the final spin in the “Cotton” programme.
——
❉——
❉—
❉❉ ❉
max.
Spin
——
7.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” 
programme.
—— — ——
❉———
❉
max.
Gentle Spin
——
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” 
programme.
—— — ——
❉———
❉
1000
1)
Drain
———
Drain only - no spinning. Alternative method of terminating programme after 
“Rinse Hold”.
—— — ——
❉—————
A. “Door open” indication
This washing machine is equipped with 
automatic safety functions which 
detect and diagnose faults at an early 
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
E. Programme selector
F. “Start/Pause” button
G. “Spin” button
H. Programme sequence indicator
I. “Reset” button
J. “Start delay” button
K. “Temperature” button
L. Display
DHC
F
I
G E
BA
J
L
}
K
30106148GB.fm  Page 1  Friday, March 7, 2008  3:10 PM
 
						

							5019 301 06148
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as 
described in the chapter “Detergent and Additives” in 
your Instructions for Use.
1. Turn the 
programme selector to the desired 
programme. The display shows the programme 
duration in hours and minutes as well as the 
predefined temperature. The 
“Start/Pause” button 
blinks.
2. The 
temperature can be altered by pressing the 
“Temperature” button.
3. The indication lamp of the predefined 
spin speed 
lights up; in case you want to set another spin speed, 
press the “Spin” button.
Push the button of any option desired - the respective 
indication lights up.
When the combination of programme and additional 
option(s) is not possible, the indication lights switch off 
automatically. Unsuitable combinations of options are 
deselected automatically.
“Clean+” button
 Choose this option if you use an in-wash additive for 
stain removal (powder, for example “Vanish”) - it will 
optimize the additive’s efficiency to get better wash 
performance and stain removal.
 Selectable for programmes “Cotton” and “Synthetics”; 
choose temperature of 30 or 40°C and use with 
maximum load. Add an appropriate amount of in-wash additive for 
stain removal (powder) to the main wash chamber, 
together with your detergent (only use powder 
detergent with this option). Respect the 
manufacturer’s dosing instructions.
 Prolongs the programme by approx. 10 to 15 minutes.
 Appropriate for use of stain removers and bleaches on 
oxygen basis. 
Chlorine or perborate bleaches must 
not be used!
“Prewash” button
 Only for heavily soiled loads (for example sand, 
granular dirt) sensible. Increases the cycle time by 
approximately 15 min.
 Do not use liquid detergent for the main wash when 
activating the Prewash option.
“Easy ironing” button
 Can be used together with “Cotton”, “Synthetics” and 
“Daily load” programmes to make ironing easier.
 Increases the water quantity and the clothes are spun 
very gently.
“Intensive rinse” button
 More water is added and rinse cycle is prolonged.
 This option is particularly suitable for areas with very 
soft water, washing baby linen and helps people with 
allergies.
“Rinse hold” button
 The laundry remains in the last rinse water without 
progressing to the final spin cycle to avoid creasing and 
prevent colours from changing.
 This option is particularly recommended for the 
programmes “Synthetics”, “Daily load” and 
“Delicates”.
 It is particularly useful if you want to postpone spinning 
to a later time, or if you want to drain only.CONSUMPTION DATA
Programme
Temperature 
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)
*
White Cotton / Antibacterial 95 7.0 74
**2.10 2:10
Cotton
***
60
7.0
54
1.19
2:20
Cotton 40 7.0 69 0.75 2:05
Synthetics 60 3.0 46
**0.80 1:35
Synthetics 40 3.0 42 0.40 1:20
Daily load 40 4.0 48 0.50 1:00
Quick wash 30 4.0 48 0.25 0:30
Delicates 30 1.5 60 0.50 0:45
SuperEco 60 7.0 69 0.84 4:00
Lingerie 30 1.0 45 0.45 0:40
Wool 40 1.0 60 0.55 0:45
Handwash 40 1.0 45 0.55 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home 
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions 
applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***Reference Programme for Energy Label.ADD DETERGENTS, CLOSE THE DOOR 
AND SELECT THE PROGRAMMESELECT ANY DESIRED OPTION
 If you select “Rinse hold”, do not leave the laundry to 
soak for too long.
Note: The programme stops to “Rinse hold” at the 
time the “Rinse hold” light in the programme sequence 
indicator is on. The indication lamp next to the 
“Start/
Pause” button blinks.
Terminate the “Rinse hold” option:
 Press the 
“Start/Pause” button; the programme will 
terminate automatically with the final spin cycle for the 
present wash programme.
 If you do not wish to spin the clothes, turn the 
programme selector knob to the “Drain” programme 
and press the 
“Start/Pause” button.
“Spin” button
 Every programme has a predefined spin speed.
 Press the button to set another spin speed.
 If spin speed “0” is selected, the final spinning is 
cancelled but intermediate spin peaks remain during 
rinse. The water is drained out only.
The “Start Delay” allows to run the machine at the consumer’s 
convenience, for example at night when electricity is cheaper. 
Do not use liquid detergent when activating the “Start Delay”.
 Select programme, temperature and options.
 Press the “Start Delay ” button to select the delay time 
by 1 to 23 hours;
 Press the 
“Start/Pause” button. 
The indication light next to the “Start Delay ” button 
lights up and the countdown of the delay time begins. 
The dot between hours and minutes of the indicated 
delay time as well as the light of the start delay button 
will keep blinking until the programme starts.
 The time delay indication disappears when the 
programme starts and it is replaced by the remaining 
programme time.
 Once having pressed the 
“Start/Pause” button, the 
number of hours preselected can be reduced by 
pressing and holding the “Start Delay ” button. From 1 
hour on, the delay time can also be reduced by minutes.
To cancel the “Start Delay ”
..before you press the “Start/Pause” button:
 Turn the programme selector to another position or 
press the 
“Reset” button.
..after having pressed the “Start/Pause” button:
 Press the 
“Reset” button for at least 3 seconds - the 
start delay time disappears from the display.
Open the tap and press the 
“Start/Pause” button. The 
indication lamp next to the 
“Start/Pause” button lights 
up. The programme sequence indicator shows the current 
programme phase, running from left to right through 
Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to 
variations in load and temperature of inlet water, the 
remaining time is newly calculated in certain programme 
phases. If this is the case, 
an animation appears on the 
display.Before starting and after end of a programme, the lamp 
lights to show that the door can be opened. As long as a 
wash programme is running, the door remains locked and 
must on no account be forced open. In case you have an 
urgent need to open it during a running programme, refer 
to “Cancel (Reset) a running programme before the end”.
“Service”
Lighting up of the “Service” indication can be caused by a 
fault in an electrical component. Refer to the 
“Troubleshooting Guide” in your Instructions for Use; if 
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open 
the water tap; if the indication still lights up, refer to the 
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain 
hose is kinked or the filter must be cleaned; in the latter 
case refer to the Instructions for Use (“Removing the 
Filter”).
 All the lights of the programme sequence indicator 
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” 
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the 
“Start/Pause” button to pause the 
programme. The light blinks.
2. Select the new programme, temperature, any options 
and another spin speed if you want.
3. Press the 
“Start/Pause” button again. The new 
programme continues at the same position where the 
previous programme was interrupted. Do not add 
detergent for this programme.
The 
“Reset” button cancels a programme before the end.
 Press the 
“Reset” button for at least 3 seconds. Any 
existing water is drained out before the door can be 
opened.START DELAYPROGRAMME START
“DOOR OPEN” INDICATIONRED INDICATIONSPROGRAMME ENDCHANGE PROGRAMME AND/OR OPTIONS 
AFTER PROGRAMME STARTCANCEL (RESET) A RUNNING 
PROGRAMME BEFORE THE END
30106148GB.fm  Page 2  Friday, March 7, 2008  3:10 PM