Whirlpool Two Speed Automatic Washer 3RLSQ8533JQ5 User Manual

TWO SPEED 
AUTOMATIC WASHER
Use & Care Guide
Table of Contents ................................................. 2
8316481
®
Models: 3RGSC9455, 3RLBR8543, 3RLSQ8533 

2
TABLE OF CONTENTS
WASHER SAFETY  ......................................................................... 2
WASHER DISPOSAL ...................................................................... 3
PARTS AND FEATURES ................................................................ 4
WASHER USE ................................................................................. 5
Understanding Washer Cycles .................................................... 5...

3
   
WASHER DISPOSAL
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS

  Read all instructions before using the washer.

  Do not wash articles that have been previously cleaned 
in, washed in, soaked in, or spotted with petrol, dry-
cleaning solvents, other flammable, or explosive 
substances as they give off vapours that could ignite or 
explode.

  Do not add petrol, dry-cleaning solvents, or other 
flammable, or explosive substances to the wash water. 
These substances give off vapours that...

4
PARTS AND FEATURES
This manual covers several different models. The washer you have purchased may have some or all of the parts and features listed 
below.
Control panel
A
B
C
DE
F
G
H
A. Control panel
B. Model and serial number label
C. Liquid fabric softener dispenser
†
D. Agitator
†on some modelsE. Lid
F. Liquid chlorine bleach dispenser
†
G. Basket
H. TubOther features your washer may have

Self-cleaning lint filter

CLEANTOUCH™ control panel

XTRA ROLL ACTION™ PLUS agitator

DURASMOOTH™ white...

5
WASHER USE
Understanding Washer Cycles
When the washer lid is closed and the Cycle Control knob is set 
to a number or cycle and pulled out, the washer fills (to the 
selected load size) before agitation and timing start. The washer 
begins agitating immediately after filling; agitation occurs with the 
washer lid down.
During agitation, the agitator creates a continuous rollover action 
(on some models) that provides a thorough cleaning of the wash 
load.
After agitation starts, the Cycle Control knob...

6
Starting Your Washer
 
1.Measure detergent and pour it into the washer. If desired, add 
powdered or liquid color safe bleach. Add extra detergent for 
the Super Wash cycle. 
Drop a sorted load of clothes loosely into your washer. 

Load evenly to maintain washer balance. Mix large and small 
items.

Items should move easily through the wash water. 
Overloading can cause poor cleaning.

To reduce wrinkling of permanent press clothes and some 
synthetic knits, use a large load size to provide more space...

7
6.Set the TEMPERATURE selector to the correct setting for the 
type of fabric and soils being washed. Use the warmest water 
safe for fabric. Follow garment label instructions.
Your washer uses automatic temperature control (on some 
models) to maintain a uniform water temperature by 
regulating the incoming hot and cold water. This helps 
eliminate undissolved detergent and ensures consistent 
cleaning results. The Hot and Warm settings on this washer 
will be cooler than you are accustomed to. Wash...

8 Cotton cycle
This cycle features high-speed agitation followed by a brief 
period of low-speed agitation for cleaning cottons and linens. 
High spin speeds shorten drying time. Select up to 15 minutes of 
wash time, depending on your model, for loads that are 
moderately or heavily soiled. For lightly soiled loads, use the 
shortest time setting.
Super Wash cycle
Select the Super Wash cycle to wash heavily soiled loads that 
need maximum soil removal. Use twice the amount of detergent 
recommended for...

9
WASHER CARE
Cleaning Your Washer
Cleaning the exterior
Use a soft, damp cloth or sponge to wipe up any spills such as 
detergent or bleach. Occasionally wipe the outside of your 
washer to keep it looking new.
Cleaning the interior
Clean your washer interior by mixing 1 cup (250 mL) of chlorine 
bleach and 2 cups (500 mL) of detergent. Pour this into your 
washer and run it through a complete cycle using hot water. 
Repeat this process if necessary.
NOTE: Remove any hard water deposits using only...

10
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid the cost of a service call...
Washer won’t fill, rinse or agitate; washer stops

Is the power cord plugged into an earthed 3 prong outlet? 
Plug power cord into an earthed 3 prong outlet.

Are you using an extension cord? Do not use an extension 
cord.

Is the indicator on the Cycle Control knob properly lined 
up with a cycle? Turn the Cycle Control knob to the right 
slightly and pull to start.

Are the water inlet valve...