Whirlpool WME 1610 A+W Manual

							4
Switching the appliance on
Starting the appliance
Insert the plug.
 The light, located under the control panel or inside the product (depending on model) comes on when
the door is opened.
 The green light comes on, indicating that the appliance is working (if present).
Note:
For mechanical products, the inside light comes on when the fridge door is opened if the thermostat knob
is not turned to the symbol 
.
Adjusting the temperature
 For temperature adjustment, see the enclosed product sheet
Note:
 Ambient air temperature, frequency of door opening and the position of the appliance can affect
internal temperatures. The temperature setting must be adjusted according to these factors.
Storing food the refrigerator compartment
Place the food as shown in the figure.
ACooked food
BFish, meat
CFruit & vegetables 
DBottles
ECheese
Notes:
 The distance between the shelves and the rear wall inside the
refrigerator ensures the free circulation of air.
 Do not place food in direct contact with the rear wall of the
refrigerator compartment.
 Do not place hot food in the refrigerator.
 Store liquids in closed containers.
Attention
Storing vegetables with high water content can cause condensation to form on the glass shelf of
the crisper drawer: this will not affect the correct operation of the appliance.
Gourmet box (if present)
Box with natural antibacterial substances suitable for contact with food products; they ensure better hygiene,
reducing unpleasant odours and keep ripe cheeses and charcuterie fresh longer.
6th Sense function
The 6th Sense function (if present) is automatically activated in the following case:
Door opening
The function is activated whenever door opening considerably alters the temperature inside the product
and remains active until optimum storage conditions are automatically reinstated.
NOTE:The duration of the 6th Sense function is calculated according to the amount of food present in
the product and the outside temperature. Therefore significant variations in these can affect the behaviour
of the product.
Fresh Control function (if present)
Enables optimum storage temperature and humidity conditions to be quickly reached inside the appliance.
USING THE REFRIGERATOR
COMPARTMENT 
 
						

							5
The low temperature compartment is  ,  or  .
Compartments marked  or  an be used to store frozen foods for the period of time
indicated on packaging. If the low temperature compartment is marked  , it can also be
used to freeze fresh food.
The quantity of fresh food that can be frozen in 24 hours is shown on the rating plate.
Note:
In the event of a power cut, the low temperature compartment will maintain a sufficiently low
temperature for food storage. However, it is advisable to avoid opening the compartment door during
such periods.
Freezing fresh food (only in compartments marked  )
Important
 Before freezing, wrap and seal fresh food in: aluminium foil, cling
film, air and water-tight plastic bags, polythene containers with
lids or freezer containers suitable for freezing fresh food.
 Arrange the fresh food in the top compartment, leaving sufficient
space around each pack for the air to circulate.
 For optimum freezing, turn the thermostat down by half a point
when placing fresh foods in the freezer compartment.
 The food will be completely frozen in 24 hours.
For appliances with compartments marked 
The table alongside shows the recommended maximum
storage time for frozen fresh foods.
When purchasing frozen food products:
 Make sure the packaging is not damaged, since the product
quality may have deteriorated. If a package is swollen or has
damp stains it has not been perfectly conserved and may started
thawing.
 When shopping, leave frozen food purchases until last and
transport the products in a thermally insulated cool bag.
 Place the items in the low temperature compartment as soon as
you get home.
 If food has defrosted even partially, do not re-freeze it. Consume
within 24 hours.
 Avoid, or keep temperature variations to the minimum. Respect
the best-before date on the package.
 Always observe the storage information on the package.
Making ice cubes
 Fill the ice cube tray 2/3 full and place it in the low temperature compartment.
 Do not use sharp or pointed instruments to detach the tray if it is stuck to the low temperature
compartment bottom.
 Bend the ice tray slightly to remove the cubes.
HOW TO OPERATE THE LOW
TEMPERATURE COMPARTMENT
MONTHSFOOD
 
						

							6
Before any cleaning or maintenance operation, always unplug the
appliance or disconnect it from the power supply.
 Clean the inside of the refrigerator compartment regularly with a
sponge dampened in warm water and/or neutral detergent. Rinse and
dry with a soft cloth. Do not use abrasive products.
 The separators must not be washed with water but cleaned with a
lightly dampened sponge.
 Clean the inside of the freezer compartment when defrosting.
 Clean the air vents and condenser at the rear of the appliance regularly
with a vacuum cleaner or brush.
 Clean the outside with a soft damp cloth. Do not use abrasive
products, scourers, stain-removers (e.g. thrichlorethylene acetone) or
vinegar.
For long vacations
1.Empty the refrigerator.
2.Disconnect the appliance from the mains power supply.
3.Defrost and clean the interior.
4.In the event of prolonged disuse, leave the door open to prevent mould, odours and oxidation from
forming.
5.Clean the appliance.


and/or neutral detergent. Rinse and dry with a soft cloth. Do not use abrasive products. Before any cleaning or maintenance operation, unplug the
appliance from the mains or disconnect the electrical power
supply.
Defrosting of the refrigerator compartment is completely
automatic.
Droplets of water on the rear wall of the refrigerator compartment
indicate that the periodic automatic defrost cycle is in progress.
The defrost water is automatically routed to a drain outlet and into a
container from which it evaporates.
Clean the defrost water drain outlet regularly using the tool supplied with
the appliance in order to ensure defrost water is removed correctly.
Defrosting the low temperature compartment
Defrost the low temperature compartment once or twice a year
or when the ice formation is excessive. It is perfectly normal for
ice to form. The amount of ice which forms and the rate at which it accumulates will depends
on room temperature and humidity, and on the frequency with which the door is opened. Ice
formation is concentrated at the top of the compartment and does not affect the efficiency of
the appliance.
If possible, carry out defrosting when the compartment is nearly empty.
 Remove the food from the low temperature compartment, wrap in a newspaper and group together in
a cool place or in a portable cooler.
 Leave the door open to allow the frost to melt.
 Clean the interior with a sponge soaked in warm water and/or neutral detergent. Do not use abrasive
substances.
 Rinse the interior and dry thoroughly.
 Put the food back into the compartment.
 Close the door.
 Plug in the appliance once again.
 Switch the appliance on.
HOW TO DEFROST AND CLEAN 
THE REFRIGERATOR
CLEANING AND MAINTENANCE
 
						

							7
When you hear these noises
..your appliance is alive!!!
1. The appliance doesnt work.
 Is there a power failure?
 Is the plug properly inserted in the socket?
 Is the double-pole mains switch on?
 Do the household electrical system protection devices work properly?
 Is the power cord damaged?
2. The temperature inside the compartments is not low enough.
 Are the doors closed properly?
 Is the appliance installed near a heat source?
 Are the air circulation vents obstructed?
3. There is water on the bottom of the refrigerator compartment.
 Is the defrost water drain is obstructed?
4. The inside light doesnt work.
Check point 1, then:
 Disconnect the appliance from the power supply.
 If your product has a lamp, to check and replace it see the instructions and figure on the attached sheet
 If your appliance has LED lights, contact the after-sales service.
5. Excessive frost in the freezer compartment.
 Is the door closed properly?
 Is food obstructing door closing?
Gurgling and hissing noises due to expansion in the refrigerant circuit are normal.
TROUBLESHOOTING GUIDE
 
						

							8
Before contacting the After-Sales Service:
1.See if you can solve the problem yourself with
the help of the Troubleshooting guide.
2.Switch the appliance on again to see if the
problem has been solved. If it has not, switch off
the appliance again and repeat the operation
after one hour.
3.If the malfunction persists, call After-Sales
Service. 
Specify:
 the type of fault.
 the model.
 the Service number (the number after the word
SERVICE on the rating plate inside the
appliance).  your full address 
 your telephone number and area code.
Note:
If reversing of appliance door opening is
carried out by the After-sales Service it is not
covered by the warranty.
AFTER SALES SERVICE
 Install the appliance away from heat sources. Installation in a hot place, near heat sources (radiators,
cookers) or direct exposure to the sun will increase energy consumption and should be avoided.
 If this is not possible, respect these minimum distances:
- 30 cm from coal or oil stoves;
- 3 cm from electric and/or gas cookers.
 For optimum operation, ensure:
- a space of at least 5 cm above the appliance;
- a distance of at least 4 cm from the rear wall;
- place other cabinets at a suitable distance from the appliance to allow at least some air circulation
 Install the appliance level (adjust the front feet if necessary) in a dry and well-aired place.
 Clean the inside.
 Insert the accessories supplied.
Electrical connection
The electrical connections must comply with the local regulations.
 Voltage and power input are specified on the rating plate inside the appliance.
Regulations require the appliance to be earthed. The manufacturer declines any liability for
injury or damage resulting from failure to observe the above rules.
 If the plug and socket are not of the same type, have the socket replaced by a qualified technician.
 Do not use extension leads or multi-adapters.
Electrical disconnection
It must be possible to electrically disconnect the appliance by unplugging it or by means of a double-pole
switch installed ahead of the socket.
INSTALLATION