Xerox Documate 3115 Scanner Docking Station User Guide

Xerox® DocuMate® 3115
User’s Guide21
System Requirements
Pentium 4 PC or AMD equivalent with:
• A DVD-ROM drive
• An available Universal Serial Bus (USB) port
•Microsoft
® Windows® operating system: 
• 32-bit Windows XP (Service Pack 1 and 2)
• 32-bit or 64-bit Windows Vista (Service Pack 1)
• 32-bit or 64-bit Windows 7
• 32-bit or 64-bit Windows 8
The scanner is compatible with Service Pack 3 for Windows XP, Service Pack 2 for Windows Vista, 
and Service Pack 1 for Windows 7.
• Minimum of 2 gigabyte...

Xerox® DocuMate® 3115
User’s Guide 22
Documentation
The following printed documentation is provided in the box:
•Installation guide—abbreviated scanner setup and installation instructions.
•
Technical support card—contact information for technical support and customer service, and a 
brief overview of our standard product warranty.
•
Warranty card—the warranty card is provided for users in Russia and should be filled in as 
described on the card. For all other users, please dispose of this card in paper...

Xerox® DocuMate® 3115
User’s Guide23
The Xerox DocuMate 3115 Scanner
Input Tray—Holds a stack of documents in the scanner. Unfolds to support various paper lengths.
Paper guides—Adjust to support various document widths.
Front Feed tray—
Open to feed items through the front of the scanner.
Output tray—Holds documents after being scanned.
Control panel—OneTouch scanning controls.
Power Switch & Scan Settings Dial—Turn the dial to the right to turn on the scanner power. 
Numbers 1-6 represent the 6...

Xerox® DocuMate® 3115
User’s Guide 24 

Xerox® DocuMate® 3115
User’s Guide25
3Scanner Setup
This chapter includes:
•Unpack and Assemble the Scanner on page 26
•Connect the Scanner Power Cord on page 28
•Detach or Attach the Xerox DocuMate 3115 on page 30 

Xerox® DocuMate® 3115
User’s Guide 26
Unpack and Assemble the Scanner
1. Remove the scanner from its protective foam and plastic bag.
2. Remove the tape and protective foam strips from the scanner body and input tray.
3. Lift the paper guide up from the scanner body. Push the tray back until it clicks in place. 
If the tray isn’t fully seated in position, paper feeding from the input tray may jam in the scanner.
4. Pull the scanner cover release to open the scanner. Remove the foam strip from the inside...

Xerox® DocuMate® 3115
User’s Guide27
4. Place the scanner body back on the docking station.
Detailed instructions for detaching and attaching the scanner are on page 30.
6. Unfold the Input Tray and Extension from the paper guide.
7. Pull the output tray away from the bottom of the Docking Station, then flip open the output tray 
extension. 

Xerox® DocuMate® 3115
User’s Guide 28
Connect the Scanner Power Cord
You can power the scanner through the standard power cord to a wall outlet, or use the USB power cord 
to power the scanner through a USB port on the computer. 
Connect the Scanner Power to the Wall
1. Plug the power supply into the power port on the scanner.
NOTE: Only use the power supply (either HEG42-240100-7L made by HiTron or DA-24C24 made by 
ADP) included with your scanner. Connecting any other type of power supply may damage...

Xerox® DocuMate® 3115
User’s Guide29
Connect the Scanner Power to the Computer
1. Plug the round end of the USB power cord into the power jack on the scanner.
2. Plug the flat end of the USB power cord into an available USB port on the back of the computer. 
We do not recommend using a USB hub to power the scanner.
NOTE: Only use the USB power cable included with your scanner. Connecting any other type of USB 
power cable may damage your scanner, and will void its warranty. If you do not have your USB...

Xerox® DocuMate® 3115
User’s Guide 30
Detach or Attach the Xerox DocuMate 3115
The Xerox DocuMate 3115 scanner body can be removed from the Docking Station to be used as a 
mobile scanner.
Detach the Scanner Body from the Docking Station
1. Press and hold the release button on the side of the Docking Station.
2. Tilt the scanner body towards the front of the Docking Station to release the scanner from the 
arms in the Docking Station. 
You can release the button on the Docking Station.
3. Set the scanner...