Xerox DocuPrint 4590 EPS User Manual

Xerox 4590 EPS/4110 EPS User Guide
1-5
1. Product overview
No. Component Function
1 DocuSP Controller The DocuSP Print Services software that provides a graphical user interface 
(GUI) to the printer for
 setting up and printing jobs, setting up the printer, 
controlling system-level preferences, and managing fonts, security,
accounting, and many other activities.
2 User Interface The User Interface (UI) is attached to the machine and consists of the Control 
Panel and the Touch Screen. Refer to “User...

Xerox 4590 EPS/4110 EPS User Guide
1-6
1. Product overview
13 14 16
15 1718
Downloaded From ManualsPrinter.com Manuals 

Xerox 4590 EPS/4110 EPS User Guide
1-7
1. Product overview
 
No. Component Function
13 Waste toner 
container coverOpen this cover when removing the waste toner bottle.
14 Waste toner 
containerCollects used toner.
15 Lever Use in order to pull out the transfer module.
16 Fuser Fuses the printed image on the paper.
WARNING:The fuser is extremely hot and will cause injury if jam 
clearing instructions are not followed.
17 Transfer module Copies the image from the drum to the paper. Open this to remove...

Xerox 4590 EPS/4110 EPS User Guide
1-8
1. Product overview
2021
22
23
24 3219
25 26 28
27 29 31
30
Downloaded From ManualsPrinter.com Manuals 

Xerox 4590 EPS/4110 EPS User Guide
1-9
1. Product overview
 
NOTE:Throughout this guide, Finisher D2 and Booklet Finisher 
may be referred to simply as the finisher.
No. Component Function
19 Post-process inserter 
(Tray 8)Loads and inserts offset and color documents, preprinted tabs, covers, or 
transparency separators.
20 Decurl button For lighter weight paper especially, press this button to decurl the output.
21 Output tray Prints are delivered here when specific output features are selected, such as...

Xerox 4590 EPS/4110 EPS User Guide
1-10
1. Product overview
User Interface (UI)
The User Interface (UI) consists of the Control Panel and Touch 
Screen. The following describes the names and functions of 
components and indicators on the Control Panel.
KEY POINT:The screens shown on the User Interface are a 
representation only of the type of screens that may be seen on the 
system. They may or may not reflect the screens displayed on 
your particular system. Also the functions and features shown on 
the...

Xerox 4590 EPS/4110 EPS User Guide
1-11
1. Product overview
 
No. Component Function
1 Control panel Allows keypad selection of features.
2 Touch Screen Allows selections to be made simply by touching a button on 
the screen.
3
Power SaverLights when the machine is in the Power Saver mode. To 
cancel the Power Saver mode, press this button.
4
Clear AllNot applicable to this product.
5
InterruptNot applicable to this product.
6
StopPress this button to stop the current print job or 
communications.
7...

Xerox 4590 EPS/4110 EPS User Guide
1-12
1. Product overview
Power on/off
WARNING:Never touch a labeled area indicating High 
Temperature. Contact can lead to burns.
Switch on the power before operating the machine. After the 
power is on, the machine will take about 5 minutes to warm up 
before you can start printing. Turn the machine off at the end of 
the day or when it is not in use for a long period of time. Also, the 
Power Saver feature on the machine will automatically activate 
when print data...

Xerox 4590 EPS/4110 EPS User Guide
1-13
1. Product overview
Power off
CAUTION:Switching off the power of the machine may cause 
loss of data being processed. 
1.Before turning the power off, make sure that all print jobs have 
completely finished. Also, make sure that the Online indicator 
is not lit.
KEY POINT:Never turn the power off while data is being received 
or when jobs are being printed.
2.Open the power switch cover at the front of the machine and 
press the power switch to the   Off position....

Xerox 4590 EPS/4110 EPS User Guide
1-14
1. Product overview
Power Saver Mode
The machine is installed with a Power Saver feature that will 
automatically shut off the electricity to the machine if no print data 
is received for a certain duration. Even though the Control Panel 
display will be off, the Power Saver button will be lit indicating that 
the machine is in Power Saver Mode.
Enter the Power Saver Mode
The Power Saver feature has two modes: a Low Power mode and 
Sleep mode. The machine enters...