Xerox Phaser 3155 User Manual

							Phaser 3140/3155/3160 Printer Service Manual8-41
Service Parts Disassembly
6. Remove 3 screws (10 mm, silver, tap) and remove the Feed Bracket.
 
s3160-028
Downloaded From ManualsPrinter.com Manuals 
						

							8-42Phaser 3140/3155/3160 Printer Service Manual
Service Parts Disassembly
7. Remove the Pick Up Gear.
8. Turn the printer upside down with the rear of the printer facing you.
s3160-030
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser 3140/3155/3160 Printer Service Manual8-43
Service Parts Disassembly
9. Lift the clip on the Pick Up Shaft and slide the Pick Up Assembly slightly to the 
left, and then lift the assembly and slide it to the right to remove it.
10. Gently press the tab and remove the Feed Actuator.
Note
For reinstallation purposes, observe the position of the spring on the Feed 
Actuator.
s3160-031
s3160-033
Downloaded From ManualsPrinter.com Manuals 
						

							8-44Phaser 3140/3155/3160 Printer Service Manual
Service Parts Disassembly
Manual Feed Actuator
PL6.0.58
1. Remove the Print Cartridge (page 8-6).
2. Remove the Paper Tray (page 8-7).
3. Turn the printer over.
4. Remove 11 screws (10 mm, silver, tap) on the Engine Shield assembly.
5. Lift the Engine Shield Assembly and disconnect all cables on the boards and 
remove the assembly.
6. Remove the Drive Assembly (page 8-35).
s3160-037
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser 3140/3155/3160 Printer Service Manual8-45
Service Parts Disassembly
7. Remove 3 screws (10 mm, silver, tap) and remove the Feed Bracket.
8. Remove the Feed Roller (page 8-38).
9. Turn the printer upside down with the rear of the printer facing you.
s3160-028
Downloaded From ManualsPrinter.com Manuals 
						

							8-46Phaser 3140/3155/3160 Printer Service Manual
Service Parts Disassembly
10. Lift the clip on the Pick Up Shaft and slide the Pick Up Assembly slightly to the 
left, and then lift the assembly and slide it to the right to remove it.
s3160-031
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser 3140/3155/3160 Printer Service Manual8-47
Service Parts Disassembly
11. Remove the Manual Feed Actuator by gently pushing on the tab and then lift 
the actuator out.
Note
For reinstallation purposes, observe  the position of the spring on the 
Manual Feed Actuator. If necessary,  wind the spring around the shaft 1 
time to increase tension during reinstallation.
Replacement Note
If necessary, wind the spring around the shaft 1 time to increase tension 
during reinstallation.
Paper Tray Empty Actuator
PL6.0.56
1. Remove the Print Cartridge (page 8-6).
2. Remove the Tray (page 8-7).
3. Remove the Rear Cover (page 8-26).
s3160-034
Downloaded From ManualsPrinter.com Manuals 
						

							8-48Phaser 3140/3155/3160 Printer Service Manual
Service Parts Disassembly
4. On the Power Supply Board, disconnect CON1.
P/JCON1s3160-038
s3160-068
Downloaded From ManualsPrinter.com Manuals 
						

							Phaser 3140/3155/3160 Printer Service Manual8-49
Service Parts Disassembly
5. Disconnect CON3.
6. Turn the printer over.
7. Remove 11 screws (10 mm, silver, tap) on the Engine Shield assembly.
P/JCON3s3160-127
s3160-037
Downloaded From ManualsPrinter.com Manuals 
						

							8-50Phaser 3140/3155/3160 Printer Service Manual
Service Parts Disassembly
8. Gently turn the Engine Shield Assembly over and disconnect all cables on the 
Controller Board and remove the assembly.
9. Gently press on the tab and lift the Tray Empty Actuator out of the printer.
s3160-047
Downloaded From ManualsPrinter.com Manuals