Xerox Phaser 4600DT User Manual
Have a look at the manual Xerox Phaser 4600DT User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Setups Xerox Phaser 4600/4620 User Guide81 7. Continue customizing the Network Settings options as required, then press Stop to return to ready mode. PostScript Setup 1. Press the Menu button on the control panel. 2. Press the up/down arrows to highlight To o l s and press OK. Note If a password is required, refer to Accessing Tools on page 78 for instructions. 3. Press the up/down arrows to highlight Setup and press OK. 4. Press the up/down arrows to highlight PostScript Setup and press OK. The following PostScript Setup options and settings are available: 5. Press the up/down arrows to highlight the option required and press OK. 6. Press the up/down arrows to highlight the setting required and press OK to save the selection. 7. Continue customizing the PostScript Setup options as required, then press Stop to return to ready mode. PCL Setup 1. Press the Menu button on the control panel. 2. Press the up/down arrows to highlight To o l s and press OK. Note If a password is required, refer to Accessing Tools on page 78 for instructions. 3. Press the up/down arrows to highlight Setup and press OK. 4. Press the up/down arrows to highlight PCL Setup and press OK. The following PCL Setup options and settings are available: OptionDescription PostScript Error InfoEnables the machine to print a PostScript Error page if PostScript problems occur during printing. Edge to Edge PrintingUsed to print to the edge of the output documents. OptionDescription Fo n t N u m b e rSets the default PCL font. PitchSets the default pitch (size) for PCL fonts. Symbol SetSets the default symbol set for PCL fonts. OrientationSets the default orientation. Fo r m L e n g t hSets the default number of lines per page. Downloaded From ManualsPrinter.com Manuals
Setups Xerox Phaser 4600/4620 User Guide 82 5. Press the up/down arrows to highlight the option required and press OK. 6. Press the up/down arrows to highlight the setting required and press OK to save the selection. 7. Continue customizing the PCL Setup options as required, then press Stop to return to ready mode. General Setup The Print Quality Mode directly controls the quality of your prints. Set the default Print Quality Mode required. 1. Press the Menu button on the control panel. 2. Press the up/down arrows to highlight To o l s and press OK. Note If a password is required, refer to Accessing Tools on page 78 for instructions. 3. Press the up/down arrows to highlight Setup and press OK. 4. Press the up/down arrows to highlight General Setup and press OK. 5. Press the up/down arrows to highlight Print Quality Mode and press OK. The following Print Quality Mode options are available: 6. Press the up/down arrows to highlight the setting required and press OK. 7. Press Stop to return to ready mode. Machine Settings 1. Press the Menu button on the control panel. 2. Press the up/down arrows to highlight To o l s and press OK. Note If a password is required, refer to Accessing Tools on page 78 for instructions. 3. Press the up/down arrows to highlight Setup and press OK. 4. Press the up/down arrows to highlight Machine Settings and press OK. Line TerminationSets the default line termination. Wide A4Sets the printable area of A4 paper size to 80 10- pitch characters. OptionDescription 600 x 600 dpiBest general-purpose mode for high-speed printing. Produces crisp, bright prints. 1200 x 1200 (Enhanced)Highest-quality prints with best detail. Recommended for photo prints. Draft ModeThis mode saves toner and is suitable for draft printing. OptionDescription Downloaded From ManualsPrinter.com Manuals