Home > Xerox > Monitor > Xerox Xa3 20 Users Guide

Xerox Xa3 20 Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Xerox Xa3 20 Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    OSD Menu
    0Xerox© LCD Monitor User’s Manual
    2 The utilities menu includes the following options:ON	 DESCRIPTION
       osd timeout 
    Allows selection of the display time of the on-screen menu.
       osd background
    Controls the translucence of  the on-screen menu’s 
    background.
      languages 
    Allows selection of the languages used on all the on-screen 
    menus.
       exit 
    Exits the utilities menu.
    1 The utilities menu provides access to the following menus:
    The utilities Menu
    picture
    advanced
    options
    utilities
    reset
    exit osd timeout 
    15 seconds
    osd background    opaque   translucent
    language 
    exit
     
    						
    							
    Technical Information
    ENGLISH
    1Xerox© LCD Monitor User’s Manual
    The screen image has been optimized during manufacture for 
    the display modes listed below.
    Video signal: (IBM PC/AT) 
    Dot X LineHorizontal Frequency(kHz)Vertical Frequency(Hz)
    720 x 40031.4770.00
    640 x 48031.4760.00
    37.8672.80
    37.5075.00
    800 x 60037.8860.30
    48.0872.20
    46.8775.00
    1024 x 76848.3660.00
    56.4870.10
    60.0275.00
    1280 x 1024*63.9860
    79.9875
    * 1280 x 1024 resolution is not available in 15” LCD monitor.
    Preset Mode Timing Chart
    4  Technical Information
     
    						
    							
    Technical Information
    Xerox© LCD Monitor User’s Manual
    
    PINDESCRIPTION
    1Red
    2Green
    3Blue
    4Ground
    5Self Test
    6Red Ground
    7Green Ground
    8Blue Ground
    95 VDC
    10Ground
    11Ground
    12SDA (FOR DDC)
    13H. Sync
    14V. Sync
    15SCL (FOR DDC)
    1561 15101
    D-SUB Connector PIN Assignment
     
    						
    							
    Technical Information
    ENGLISH
    Xerox© LCD Monitor User’s Manual
    
    Permanently unlit or lit pixels
    The standard of production techniques today cannot guarantee an absolutely fault free LCD display. A few isolated permanently lit or unlit pixels may be present. The maximum permitted number of pixel faults is stipulated in the stringent international standard ISO 13406-2 (Class II).
    .
    Visual Inspection
    This monitor conforms to the VESA DDC (Display Data 
    Channel) standard, which means that when it is used with a 
    DDC compatible video card, the monitor is easier to set up. 
    With VESA DDC 1/2B, when the monitor is turned on, it will 
    automatically notify a windows 9X/2000/XP host computer of its 
    scanning frequencies, capabilities and characteristics. Windows 
    9X/2000/XP will automatically recognize the presence of the 
    monitor and select the appropriate display resolution.
    Plug and Play
     
    						
    							
    Technical Information
    Xerox© LCD Monitor User’s Manual
    
    Before consulting service personnel, check the following 
    chart for a possible cause and solution to the trouble you are 
    experiencing.
    Monitor will not turn on
     
    • Make sure the power cord is plugged in.
    No picture 
    •    Make sure the power cord is plugged in.
    •   Check the signal cable connecting the LCD monitor 
    and the computer (refer to page 12-13).
    •   Press the     button on the front panel of the monitor.
    Poor picture or abnormal picture 
    •    Check the D-SUB cable connecting the LCD monitor 
    and the computer (refer to page 12-13).
    •   Press the MENU button to adjust the Brightness 
    Contrast option in the OSD.
    •   Adjust the Color Select option in the OSD.
    •   Press the AUTO button on the front panel of the 
    monitor, to automatically adjust the display mode.
    Out of range message appears 
    • Press the AUTO button on the front panel of the 
    monitor, to automatically adjust the display mode.
    •  Press the MENU button to adjust the V Position, H 
    Position and H Size options in the OSD.
    •  If using Windows 9X/2000/XP, wait a few seconds; 
    once Windows detects the problem, a dialog will 
    appear allowing you to manually set up the video 
    mode according to the preset mode timing chart 
      (refer to page 21). 
    Troubleshooting
     
    						
    							
    Technical Information
    ENGLISH
    Xerox© LCD Monitor User’s Manual
    
    Specifications
    MODELXA3-15
    LCD PanelPanel Size15’ TFT LCD
    Brightness250
    Contrast Ratio500:1
    Dot Pitch0.297mm x 0.297mm
    Max. Resolution1024x768
    Input ConnectorD-SUB
    Power SourceAC100-240V, 50-60Hz
    Power Consumption36W
    Dimension349x334x172 mm
    Changes	are	periodically	made	to	this	specifications.	
    Current	specifications	may	also	be	obtained	via	the	internet,
    www.xerox-displays.com or www.xerox-displays.info
    MODELXA3-17XXA3-19
    LCD PanelPanel Size17’ TFT LCD19” TFT LCD
    Brightness300250
    Contrast Ratio500:1800:1
    Dot Pitch0.264mm x 0.264mm0.294mm x 0.294mm
    Max. Resolution1280x10241280x1024
    Input ConnectorD-SUBD-SUB
    Power SourceAC100-240V, 50-60HzAC100-240V, 50-60Hz
    Power Consumption48W48W
    Dimension378x382x192 mm426x413x210 mm
     
    						
    							
    Technical Information
    Xerox© LCD Monitor User’s Manual
    U.S.A.
    CALIFORNIA: AUTHORIZED SERVICE CENTER
    7373 HUNT AVENUE
    GARDEN GROVE, CA 92841
    (714) 799-3899
    (800) 469-1175
    (714) 379-6290 Fax
    Hours:	8AM	~	6PM	-	Pacific	Standard	Time
    TEXAS: AUTHORIZED SERVICE CENTER
    10849 KINGHURST SUITE # 120
    HOUSTON, TX 77099
    (281) 530-4100
    (281) 530-4104 Fax
    Hours: 8AM ~ 6PM - Central Time
    EUROPE
    AUTHORIZED SERVICE CENTER CONTACTS:
    XOAL BVBA
    RAKETSRAAT 100
    B-1130 BRUSSEL BELGIUM
    E-EMAIL: [email protected]
    http://www.proview-repair.com
    Hotline: 00800 00 88 77 66
    Fax: +32-2-725-2513
    Hours: 10AM ~ 12PM and 2PM ~ 5PM
    Monday through Friday
    Authorized	Service	Centers
     
    						
    All Xerox manuals Comments (0)

    Related Manuals for Xerox Xa3 20 Users Guide