Xerox Xm3 19w Users Guide

							
OSD Menu
20Xerox© LCD Monitor User’s Manual

2  The advanced menu includes the following options:ON  DESCRIPTION     sharpness   
   Increase this setting to see crisp edges in the picture; 
decrease for soft edges. 
     color       Allows selection of the general color tint:    user, natural, warm, or cool.
cool Inclines colors toward the blue end of the spectrum.  Fixes the red, green and blue component levels at factory settings; they cannot be independently adjusted.
natural Inclines colors toward the natural end of the spectrum.  Fixes the red, green and blue component levels at factory settings; they cannot be independently adjusted.
warm Inclines colors toward the red end of the spectrum.  Fixes the red, green and blue component levels at factory settings; they cannot be independently adjusted.
user Allows the user to adjust red, green and blue color component levels independently.
     exit    Exits the advanced menu.
1 The advanced menu provides access to the following menus:
The advanced Menu
picture
advanced
audio
options
utilities
reset
exit
sharpness   1  2  3  4  5
color    cool    natural    warm    user
user red
user green
user blue
exit
 
						

							
OSD Menu
ENGLISH
21Xerox© LCD Monitor User’s Manual

2  The audio menu includes the following options:ON  DESCRIPTION
  volume    
Adjusts the speakers volume up and down.
  mute  
Mutes and restores the monitor speakers sound.
  exit 
Exits the audio menu.
1 The audio menu provides access to the following menus:
The audio Menu
picture
advanced
audio
options
utilities
reset
exit
volume
mute                             on         off
exit
 
						

							
OSD Menu
22Xerox© LCD Monitor User’s Manual

2  The options menu includes the following options:ON  DESCRIPTION
  osd h. position     
Moves the OSD left and right in the window.
  osd v. position  
Moves the OSD up and down in the window.
  exit 
Exits the OSD menu.
1 The options menu provides access to the following menus:
The options Menu
picture
advanced
audio
options
utilities
reset
exit
osd h position
osd v position
exit
 
						

							
OSD Menu
ENGLISH
23Xerox© LCD Monitor User’s Manual

2  The utilities menu includes the following options:ON  DESCRIPTION
   osd timeout 
Allows selection of the display time of the on-screen menu.
   osd background
Controls the translucence of  the on-screen menu’s 
background.
  languages 
Allows selection of the languages used on all the on-screen 
menus.
   exit 
Exits the utilities menu.
1 The utilities menu provides access to the following menus:
The utilities Menu
picture
advanced
audio
options
utilities
reset
exit
osd timeout  15 seconds
osd background    opaque   translucent
language 
exit
 
						

							
Technical Information
24Xerox© LCD Monitor User’s Manual

The screen image has been optimized during manufacture for 
the display modes listed below.
Video signal: (IBM PC/AT) 
Dot X LineHorizontal Frequency(kHz)Vertical Frequency(Hz)
720 x 40031.4770.00
640 x 48031.4760.00
37.8672.80
37.5075.00
800 x 60035.1656.25
37.8860.30
48.0872.20
46.8775.00
1024 x 76848.3660.00
56.4870.10
60.0275.00
1280 x 102463.9860
79.9875
1440 x 90055.4759.90
70.6474.98
Preset Mode Timing Chart
4  Technical Information
 
						

							
Technical Information
ENGLISH
25Xerox© LCD Monitor User’s Manual

PINDESCRIPTIONPINDESCRIPTION
1TMDS  Data 2-15GND
2TMDS Data 2+16Hot Plug Detect
3TMDS Data 2/4 shield17TMDS Data 0-
418TMDS Data 0+
519TMDS Data 0/5 shield
6DDC Clock20
7DDC Data21
8Analog Vertical Sync22Clock shield
9TMDS Data 1-23Clock +
10TMDS Data 1+24Clock -
11TMDS Data 1/3 shieldC1Analog red
12C2Analog green
13C3Analog blue
14+5V PowerC4Analog
181691724
C1C2C3C4
DVI Connector PIN Assignment
 
						

							
Technical Information
26Xerox© LCD Monitor User’s Manual

PINDESCRIPTION
1Red
2Green
3Blue
4Ground
5Self Test
6Red Ground
7Green Ground
8Blue Ground
95 VDC
10Ground
11Ground
12SDA (FOR DDC)
13H. Sync
14V. Sync
15SCL (FOR DDC)
156
1 15101
D-SUB Connector PIN Assignment
 
						

							
Technical Information
ENGLISH
27Xerox© LCD Monitor User’s Manual

Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault free LCD display. A few isolated permanently lit or unlit pixels may be present. The maximum permitted number of pixel faults is stipulated in the stringent international standard ISO 13406-2 (Class II).
Example:  A 17” flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are about 4 million dots in total.
According to ISO 13406-2 (Class II), a maximum of 6 pixels and 7 subpixels may be defective, i. e. a total of 25 faulted dots. This corresponds to approx. 0.002 % of the entire screen surface.
Visual Inspection
This monitor conforms to the VESA DDC (Display Data 
Channel) standard, which means that when it is used with a 
DDC compatible video card, the monitor is easier to set up. 
With VESA DDC 1/2B, when the monitor is turned on, it will 
automatically notify a windows 9X/2000/XP host computer of its 
scanning frequencies, capabilities and characteristics. Windows 
9X/2000/XP will automatically recognize the presence of the 
monitor and select the appropriate display resolution.
Plug and Play
 
						

							
Technical Information
28Xerox© LCD Monitor User’s Manual

Before consulting service personnel, check the following 
chart for a possible cause and solution to the trouble you are 
experiencing.
Monitor will not turn on
 
• Make sure the power cord is plugged in.
No picture 
•   Make sure the power cord is plugged in.
•   Check the signal cable connecting the LCD monitor 
and the computer (refer to page 12-15).
•   Press the     button on the front panel of the monitor.
Poor picture or abnormal picture 
•   Check the D-SUB cable connecting the LCD monitor 
and the computer (refer to page 12-15).
•   Press the MENU button to adjust the Brightness 
Contrast option in the OSD.
•   Adjust the Color Select option in the OSD.
•   Press the AUTO button on the front panel of the 
monitor, to automatically adjust the display mode.
Out of range message appears 
• Press the AUTO button on the front panel of the 
monitor, to automatically adjust the display mode.
•  Press the MENU button to adjust the V Position, H 
Position and H Size options in the OSD.
•  If using Windows 9X/2000/XP, wait a few seconds; 
once Windows detects the problem, a dialog will 
appear allowing you to manually set up the video 
mode according to the preset mode timing chart 
  (refer to page 24). 
Troubleshooting
 
						

							
Technical Information
ENGLISH
29Xerox© LCD Monitor User’s Manual

Specifications
MODELXM3-19w
LCD PanelPanel Size19”w TFT LCD
Brightness300
Contrast Ratio500:1
Dot Pitch0.284mm x 0.284mm
SpeakersBuilt-In 
Max. Resolution1440x900
Input ConnectorD-SUB x 2/ DVI x 1/PC AUDIO
Power SourceAC100-240V, 50-60Hz
Power Consumption48W
Dimension457x371x210 mm
Changes are periodically made to this specifications. 
Current specifications may also be obtained via the internet,
www.xerox-displays.com or www.xerox-displays.info