Zanussi Zwf 1430 S Manual

WASHING MACHINE
ZWF 1230 W - ZWF 1430 W
ZWF 1430 S - ZWF 1630 W




 
	
	 	
		











	









 
 
!   #

$%


&

INSTRUCTION BOOKLET132989150GB
132989150.qxd  13/03/2004  09.00  Pagina  1 

2
Installation
●This appliance is heavy. Care should be taken when
moving it.
●It is dangerous to alter the specifications or attempt
to modify this product in any way.
●All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in instructions.
●Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
●Any electrical work required to install...

3
Contents
For the User
Important Safety Information2
Your New Washing Machine4
Description of the Appliance5
Detergent dispenser drawer 5
Child safety feature 5
The Control Panel6-9
Turning the acoustic signal off 6
Operating sequence10-12
Load the laundry 10
Measure out the detergent 10
Measure out the fabric softener 10
Switch the machine on 10
Select the required programme/fabric 10
Select the temperature 11
Select the spin speed or the Rinse Hold option 11
Select the desired options 11
Select the...

4
Your New Washing Machine
Your new washing machine meets all modern requirements for effective treatment of laundry
with low water, energy and detergent consumption. 
Even small loads are washed “economically” because the amount of water used is regulated
automatically according to the load and type of fabric.
●Automatic cooling of the wash water to 60°C
before draining, with the 95°C programme. This
reduces thermal shock to fabrics, helping to prevent
creasing.
●The special wool programmewith its new...

5
Description of the Appliance
1 Detergent dispenser drawer
2 Control panel
3 Door opening handle
4 Drain pump
5 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener
Child safety feature
This machine incorporates a special child safety feature
to prevent small children from being trapped inside the
machine.
To activate this device, rotate the button (without
pressing it) inside the door clockwise until the groove is
horizontal. If necessary use a coin.
To disable this device and...

1 “On/Off” button
Press this button to switch the washing machine on.
The display (8) will show three blinking dashes or a
blinking zero. You will find more detailed explanations
on pages 7-8 (see “DISPLAY”).
Press the On/Off button again to switch the machine
off.
2 MAINS-ON light
This light is connected to the “On/Off” button. It lights
up when you press the button, and goes out when you
press it again.
3 FABRICS button
Press this button repeatedly to select the programme on
the basis of the type of...

7 You can change the spin speed by means of “Spin”
button and then depress Start/Pause .
Important! If you accidentally press the “Skip Reset”
button more than once, the display will show three
blinking dashes. To drain the water, select any washing
programme by means of the FABRICS button, then
press “Skip Reset” three times in order to select the
drain (only the “drain” light will remain lit). 
6 WASH CHOICE button
Press this button to select the following options:
• Prewash: select this option if you...

8 •Delay start, a time value indicated in hours and
selected by means of the relevant button.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the Start/Pause button, the
countdown begins, and the delay time value decreases
by one unit every hour.
You can delay the start of the selected programme by
up to 23 hours in one hour intervals.
• An incorrect option selection has been made: this is
indicated by the messageErrwhen a function...

9 To select rinses & spin, the programme must be paused,
now press the Skip button once, the washLED goes out.
To select spinonly, the programme must be paused,
now press the Skip button twice. 
The wash &rinsesLED,s go out.
To select Drainthe programme must be paused, now
press the Skip button three times, the wash - rinses -
spinLED,s go out.



	






	






	






	



11 DELAY START button
This button makes it...

10
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment  of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 60°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 5.5 KG OF WHITE COTTON AT 95°C
Suppose you have 5.5 kg of heavy soiled laundry to
wash. It is white cotton and...