Zenith Projector Lxg 120 User Manual

20
Connecting to a Macintosh PowerBook
Connections 
a.Connect either end of the computer cable tothe Computer In of the projector.
b. Set the adjusting number and letter of the Macintosh desktop adapter to the resolution you want to use
and connect the adapter to the Macintosh PowerBook.(Refer to page 18-19)
c.Connect the other end of the computer cable to the Macintosh desktop adapter.
d.Connect the audio cable from the PC to the Computer Audio of the projector.
e.Connect the mouse cable from the...

21
Connecting to a Video Source
Standard Audio/Video Connection
a.When connecting the projector to an A/V source, connect the A/V input ports of the projector to the out-
put ports of the A/V source with A/V cables of the same color. The video cable is yellow. The left audio is
white and right audio is red.
S-VHS Video Connection
b.Connect S-Video input port of the projector to S-Video output port of A/V source with S-Video cable.
* For better picture quality, use the S-Video connection rather than the...

Connecting to a DTV Settop Box
Computer OutComputer In Mouse
Computer
Audio
K
AudioVideoS-VideoRL/MONO
DTV OUT(R) AUDIO (L) 
Connections
a.Connect the Computer In of the projector to DTV OUTof the D-TV Set-top Box.
b.Connect the Audio input ports (R, L/Mono) of the projector to the Audio output ports (R, L) of the D-TV
Set-top Box.
lTo receive HDTV programing, a DTV receiver (Set-top Box) must be connected to the projector. 
a b
DTV Set-top Box
22INSTALLATION AND
CONNECTION 

23
Turning on the Projector
Remove the lens cover of the projector.
Press the main power button on the back panel.
1
Press the powerbutton on the remote control or top cover. (Green operation indicator flashes
during warming up of the lamp.)
lAn image appears after the green power indicator has flashed for some time.
3 2
Adjust volume level.
lPress volumebuttons to increase or decrease sound level.5
24
•Do not shut off the main power (back panel switch) or unplug the power cord while the
ventilation fan...

BASIC
FUNCTIONS
24
Focusing and Positioning the Screen Image Focusing and Positioning the Screen Image
When an image appears on the screen, make certain that the picture is focused and fits prop-
erly on the screen.
l To adjust the focus of the image, rotate the focus (outer) ring on the lens.
l  To adjust the size of the image, rotate the zoom (inner) ring on the lens.
To raise or lower the image on the screen, extend or retract the foot at the bottom of the pro-
jector by pushing foot adjuster as shown...

25
If the projector is installed on a surface that is not stable or flat, the projected image shape
will be distorted.
POWER
MENU
SOURCEBLANKENTER
VOL-VOL+
Horizontal leveler
l To correct this condition, adjust the projector’s position using the horizontal leveler as shown above.
Operating the Projector 

Function checking
3
Press the menubutton.
1
Move the pointerbutton up or down to select a menu and press the enterbutton. Each press of the
button will cycle through the available menus.
Move the 
pointerbutton up or downto select a function that you want to use or adjust.
lWithout an input signal from a PC or Video source, the On-Screen Display (OSD) doesn’t appear.
lTo exit the menu display, press the 
menubutton repeatedly.
*In AV mode, Horizontal/ Verticalin POSITION menu, VGATextin SPECIALmenu and...

Selecting source mode
Press the sourcebutton 
1
Each press of the sourcebutton changes the display as shown below.
2
PCAV
27 

Using Still function
Press the stillbutton.
• You can freeze the input image from a PC or AV source.1
To return to normal video, press the stillbutton again.
2
Moving ImageStill Image
28
BASIC
FUNCTIONS 

Selecting language
Press the menubutton and move the pointerbutton up or downto select the SPECIALmenu
as shown below.
1
Press the enterbutton and move the pointerbutton up or downto select the Languageitem.
Move the pointerbutton left or right to select the language you want to use.
l  On-Screen-Display(OSD) will change to the language chosen.lTo exit the menu display, press the menubutton repeatedly.
2
3
exit           move        enterMenu MenuG VIDEOG POSITIONG SPECIALG TRACKING
exit           move...