Zenith Projector Lxg 135 User Manual

11
Installation and Connections
Accessories Accessories
1.5V1.5V
1  2 3 4 5 6 7 8 9ON
Mouse Connecting Cables
Optional Extras 
lContact an authorized service center for lamp replacement.lContact your dealer to purchase other items.lWhen installing a ceiling mount, use only the ceiling mount for this unit (contact your dealer). Remote Control
Batteries 2 (size AA) Power CordAudio/Video Cable
Audio Cable Computer Cable
MAC Serial Mouse CableMAC Desktop Adapter
Lamp Portable Bag
S-Video Cable
Projection...

INSTALLATION AND
CONNECTION
12
Using Kensington Security System Using Kensington Security System
lThe projector has the Kensington Security System Connector on the back panel. Connect the Kensington
Security system cable as  shown below.
lFor installation instructions and operation of the Kensington Security System, refer to the user’s
guide attached to the Kensington Security System unit. 
For further information, contact http://www.kensington.com, the internet home page of the
Kensington company for...

13
Installation and Connections
Projector Status Indicators Projector Status Indicators
lLamp Indicator, operation indicator, and temperature indicator on the top of the projector, reveal the operating status of
the projector.
* Warning messages displayed on the screen shown above in parenthesis.
Orange Standby.
Power Indicator
Green On operation.
Orange Standby.
Operation IndicatorGreen On operation.(Turn on the lamp)
Red Projector lamp is cooling -power down (2 minutes)
Off Power off.
Projection lamp...

Basic Projector Operation Basic Projector Operation
INSTALLATION AND
CONNECTION1 1. Place the projector on a 
sturdy, horizontal 
surface.
2 2. Place the projector the 
correct distance from the 
screen. Note: The distance 
between the projector and 
the screen determines the 
actual size of the image. 
3 3. Turn the projector so that 
the lens is at a right 
angle to the screen. If the 
projector is not at a right 
angle, the screen image will 
be askew. At this time 
perform keystone function. 
(Refer...

15
Connection to a Desktop PC Computer
lYou can connect the projector to a computer’s VGA, SVGA, XGA and SXGA output. 
lYou can resize the image for VGA, SVGA output.
lRefer to page 41 for the projector supported monitor display listing.
Connections
a. Connect either end of the computer cable to Computer Inon the projector.
b.  Connect the monitor cable from the PC monitor to Computer Outon the projector in order to see the pro-
jected image from a PC monitor.
c.  Connect the audio cable from the PC...

16
Connection to a PC Notebook Computer 
Connections 
a.  Connect either end of the computer cable to Computer Inon the projector.
b.  Connect the audio cable from the PC to Computer Audio on the projector.
c.   Connect the PS/2 mouse (for IBM PC or compatible) cable (6 pin) to Mouse input on the projector.
Computer Out    
AC Computer In   Mouse
Computer
Audio
K
Audio Video
S-VideoR L/MONO
a
c b
INSTALLATION AND
CONNECTION 

17
Connection to a Macintosh Desktop 
Connections
a.  Connect either end of a computer cable to the Computer Ininput on the projector.
b.  Connect the monitor cable from the Macintosh monitor to Computer Outon the projector in order to see
the projected image on a Macintosh monitor.
c.  Set the adjusting number and letter on the Macintosh desktop adapter to the resolution you want to use
and connect the adapter to the Macintosh. (Refer to page 18-19)
d.  Connect the computer cable to the Macintosh...

18
Macintosh Desktop  Macintosh Desktop 
Adapter Setup Adapter Setup
1  2 3 4 5 6 7 8 9ON
Adjusting letter code
Adjusting number code
(Dip Switch)
a.How to use
Set 1-6 to OFF status and 7-9 to ON status on the dip switches. Select the adjusting letter
which is correct for the Macintosh and the monitor. (Refer to page 19.) 
b. Notes for Connecting to a Macintosh PowerBook
If you have problems after connecting the PowerBook to the projector, set dip switch number
9 to OFF status and restart the Macintosh...

19
Connection to a Macintosh Computer
Adjusting letter code of MAC desktop adapter based upon types of MAC and output spec. Adjusting letter code of MAC desktop adapter based upon types of MAC and output spec.
MAC llci, llsi
MAC llvi, llvx
LC
LCII
LCIII
LC 475, LC 550
LC 575
Performa
400,405,410,430,600,600CD
450
Quadra
700,900
605,610,650,800,950
840AV
Centris
610,650
660AV
PowerBook
160,165C,180,180C
DUO DOC, MINI DOC
8 24 BOARD12¥›RGB
512x384
24.5
60
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N output...

20
Connection to a Macintosh PowerBook
Connections 
a. Connect either end of a computer cable to theComputer In input on the projector.
b.  Set the adjusting number and letter on the Macintosh Desktop Adapter to the resolution you want to use
and connect the adapter to the Macintosh PowerBook. (Refer to page 18-19)
c. Connect the other end of the computer cable to the Macintosh Desktop Adapter.
d. Connect the audio cable from the Macintosh to the Computer Audio input on the projector.
e. Connect the...