Zenith Projector Lxg 135 User Manual
Have a look at the manual Zenith Projector Lxg 135 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10 Zenith manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Flipping V Flipping V ertical ertical Press the MENU button and move the POINTERup or down to select the SPECIAL menu. 1 Press the ENTERbutton and move the POINTER up or down to select the Flip Verticaloption.2 Press the ENTERbutton to see the reverse image. lEach time you press the ENTER button, the image is reversed.lTo remove the menu display, press the MENUbutton repeatedly. 3 lThis function reverses the upper and the lower side of the projected image. l If you hang the projector upside down from the ceiling, you must reverse all the sides (left, right, upper, lower) of the image. exit move enterMenuG VIDEOG POSITIONG SPECIALG TRACKING exit move enterMenuG VIDEOG POSITIONESPECIALLanguage Flip Horizontal Flip Vertical Blank Image Lamp Time VGA Text G TRACKING exit move enterMenuG VIDEOG POSITIONESPECIALLanguage Flip Horizontal Flip Vertical Blank Image Lamp Time VGA Text G TRACKING Press Enter to Flip exit move enterMenuG VIDEOG POSITIONESPECIALLanguage Flip Horizontal Flip Vertical Blank Image Lamp Time VGA Text G TRACKING Press Enter to Flip Press Enter to Flip Using Flip Horizontal / Vertical Functions
32 SPECIAL FUNCTIONS Using the Blank Function lThis function blanks the Video and mutes the Audio. Press the BLANKbutton. • The screen will blank and the audio will be muted. • You can choose the background color. Refer to page 32. 1 To exit the blank status mode, press the BLANKbutton again.2
33 TITLEUsing the Blank Function Selecting Blank Image Color Selecting Blank Image Color Press the MENU button and move the POINTERup or down to select the SPECIAL menu. 1 Press the ENTERbutton and move the POINTERup or down to select the Blank Imageoption.2 Move the POINTERleft or right to select the color you want to use. lBackground color changes to the selected color.lTo remove the menu display, press the MENUbutton repeatedly. 3 exit move selectMenuG VIDEOG POSITIONESPECIALLanguage Flip Horizontal Flip Vertical Blank Image Lamp Time VGA Text G TRACKING exit move enterMenuGVIDEOG POSITIONGSPECIALG TRACKING Blue G
SPECIAL FUNCTIONS 34 Checking Lamp Time Press the MENUbutton and move the POINTERup or down to select the SPECIAL menu as shown below.1 Press the ENTER button and move the POINTERup or down to select the Lamp Timeoption.2 lThe elapsed lamp time is displayed in hours.l When the lamp time reaches 1400 hours, the lamp indicator changes to an orange color. exit move enterMenuG VIDEOG POSITIONG SPECIALG TRACKING exit move MenuG VIDEOG POSITIONESPECIALLanguage Flip Horizontal Flip Vertical Blank Image Lamp Time VGA Text G TRACKING0 Hr
35 Selecting PC Screen Size Input Signal Press the MENUbutton and move the POINTERup or down to select the SPECIAL menu as shown below. lWhen using the PC input mode, before turning on the PC, select the appropriate screen size in the SPECIAL menu. This will enable the image size of the PC in DOS mode to fit on the projection screen. lFor other screen size signals except 640X400 70Hz and 720X400 70Hz, the projected image sizes are adjusted automatically. 1 Press the ENTER button and move the POINTERbutton up or down to select the VGA Text option.2 Move the POINTERleft or right to select the screen size you want to use. 3 la. Selecting 720X400 : If the input signals are 720X400 70Hz or 640X400 70Hz , the projected image size will always be adjusted to the 720X400 70Hz format. b. Selecting 640X400 : If the input signals are 720X400 70Hz or 640X400 70Hz , the projected image size will always be adjusted to the 640X400 70Hz format. lTo remove the menu display, press the MENUbutton repeatedly. exit move enterMenuG VIDEOG POSITIONG SPECIALG TRACKING exit move selectMenuG VIDEOG POSITIONESPECIALLanguage Flip Horizontal Flip Vertical Blank Image Lamp Time VGA Text G TRACKING720X400G
POSITION- ING 36 Adjusting Screen Display Positioning Positioning Press the MENUbutton and move the POINTERup or down to select the POSITION menu. 1 Press the ENTERbutton and move the POINTER up or down to select the Horizontal, Vertical or Keystoneoption. lIf the image size does not fit the screen properly, choose the position of the image by selecting the Horizontal/ Verticaloption. lKeystone function adjusts the upper and lower width of the projected image to prevent the image shape from appearing skewed. This can occur if the screen and projector are not perpendicular to one another. 2 Press the POINTER button and move the button left or right or press the VOLUMEbuttons to adjust the image on the screen. l Horizontal, Vertical, Keystoneare adjusted from -50 to +50. lTo remove the menu display, press the MENUbutton repeatedly. 3 exit move adjustMenuG VIDEOEPOSITIONHorizontal Vertical Keystone Zoom Resize G SPECIALG TRACKING 0 exit move enterMenuGVIDEOG POSITIONGSPECIALG TRACKING PC mode
37 Adjusting Screen Display Zoom Function Zoom Function Press the ZOOMbutton.1 Move to the position you want to see the enlarged display by moving the POINTERbutton left, right, up, or down.4 Press the ZOOMbutton again to return to normal viewing.5 Press the LMOUSEor R MOUSEbutton to adjust the zoom level. l LMOUSEbutton makes the image look smaller.l R MOUSEbutton makes the image look larger. 3 Move the POINTER button to the position you wish to see enlarged. Press the ENTER button to enlarge the selected areas.2 lYou can also access this function in the on-screen menus.lIn the zoom mode, you can adjust horizontal / vertical position with the POINTERbutton. 11/2525/25
38 Using the Resize Function lYou can use this function only in SVGA (800x600) mode. lYou can also access this function in the on-screen menus. Press the RESIZEbutton. Each press of the button changes the display as below. Scaled4 : 3 Original16 : 9 PC mode AV mode VIDEO 1
39 Adjusting Video Press the MENUbutton and move the POINTERup or down to select the VIDEO menu. 1 Move the POINTERbutton up or down to select the desired video option.3 Move the POINTERbutton left or right or press the VOLUMEbuttons to adjust the selected video option: l To restore the original image condition select the Reset option and press ENTER.l To remove the menu display, press the MENUbutton repeatedly. 4 Press the ENTERbutton.2PC Mode PC Mode AV Mode AV Mode exit move adjustMenuEVIDEOContrast Brightness Color R Color G Color B Reset G POSITIONG SPECIALG TRACKING 80 exit move adjustMenuEVIDEOContrast Brightness Color Tint Reset G POSITIONG SPECIAL 80 exit move enterMenuGVIDEOG POSITIONGSPECIALG TRACKING exit move enterMenuG VIDEOG POSITIONG SPECIAL
TRACKING 40 Using Tracking Function lAuto Tracking Function This function automatically adjusts the difference of horizontal width and tremor of the image. This difference is caused by discord of the internal signal of the projector and diverse graphic signals of PC. lImage positioning and tremor adjustment are automatically performed. Press the AUTO TRACKINGbutton. lYou can also access this function by using the MENUbutton.lPerform this function while on a stationary image. You may not get the optimum video quality of a moving image from a PC graphic signal. lThis function should be performed using a stable image from the PC. Auto Tracking Auto T Auto T racking Function racking Function l TRACKING menu is not displayed in AV mode.