Adam Equipment PGW Precision Balances PGWuserrevE4 User Manual

Page 41 of 48 
 
Poor Linearity Usually a mechanical 
problem 
 
 
  
Electronic Problems 
Re-check repeatability 
*Inspection of the flexures for damage 
or loose hardware may be required 
*Use the Linearity Function in the 
service menu to reset linearity 
*A problem in the analogue circuit board 
or power supplies can cause poor 
linearity.  Make sure all mechanical 
problems have been eliminated first 
  
OTHER PROBLEMS: 
Cannot calibrate Zero shifted more 
than allowed 
 
Calibration timeout...

Page 42 of 48 
17.0  REPLACEMENT PARTS AND ACCESSORIES 
 
If you need to order any spare parts and accessories, contact your supplier or 
Adam Equipment. A partial list of such items is as follows- 
 
• Power Supply Module 
• Stainless Steel top Pan 
• Below Balance Hanger 
• Density Determination Kit  
• Anti-Vibration Table 
• Security Lock and Cable 
• Dust Cover 
• Printers, etc. 
  
18.0  SERVICE INFORMATION 
 
This manual covers the details of operation. If you have a problem with the 
balance...

Page 43 of
 48 
19.0  BALANCE MENU STRUCTURE
 
 
 
© Adam Equ
ipment Com
pan
y 2007  

Page 44 of
 48 
 
© Adam Equ
ipment Com
pan
y 2007 
  

Page 45 of 48  

Page 46 of 48 
WARRANTY INFORMATION 
Adam Equipment offers Limited Warranty (Parts and Labour) for the components failed 
due to defects in materials or workmanship.  Warranty starts from the date of delivery. 
During the warranty period, should any repairs be necessary, the purchaser must inform 
its supplier or Adam Equipment Company. The company or its authorised Technician 
reserves the right to repair or replace the components at any of its workshops 
depending on the severity of the problems....

Page 47 of 48 
Manufacturer’s Declaration of Conformity 
This product has been manufactured in accordance with the harmonised European standards, 
following the provisions of  the below stated directives: 
Electro Magnetic Compatibility Directive 89/336/EEC 
Low Voltage Directive 73/23/EEC   Adam Equipment Co. Ltd. 
Maidstone Road, Kingston, Milton Keynes, MK10 0BD  United Kingdom 
FCC COMPLIANCE 
This equipment has been tested and found to comply with the limits for a Class A digital device, 
pursuant...

Page 48 of 48 
© Adam Equ
ipment Company 2007 
ADAM EQUIPMENT  is an ISO 9001:2000 certified global company with more than 35 
years experience in the production and sa le of electronic weighing equipment.  
Adam products are predominantly designed for the Laboratory, Educational, Medical, 
retail and Industrial Segments. The product range can be described as follows: 
-Analytical and Precision Balances 
-Compact and Portable Balances 
-High Capacity Balances 
-Moisture analysers / balances 
-Mechanical...