Home > Apple > Personal Computer > Apple power mac g4 quicksilver User Manual

Apple power mac g4 quicksilver User Manual

Here you can view all the pages of manual Apple power mac g4 quicksilver User Manual. The Apple manuals for Personal Computer are available online for free. You can easily download all the documents as PDF.

Page 101

 Take ApartCarrier Support Plate - 79
2. Lift the plate at an angle 
and remove it from the 
computer. 

Page 102

 Take ApartCD/DVD Drive, Power Mac G4 (QuickSilvers)  -   80
CD/DVD Drive, Power 
Mac G4 (QuickSilvers)
Before you begin, open the 
side access panel.
Note: You remove the drive 
carrier from the computer 
with the drives attached to 
the carrier. 

Page 103

 Take ApartCD/DVD Drive, Power Mac G4 (QuickSilvers)  -   81
1. Remove the four screws 
that attach the drive 
carrier to the chassis.  

Page 104

 Take ApartCD/DVD Drive, Power Mac G4 (QuickSilvers)  -   82
2. Supporting the bottom of 
the carrier, slide it back 
and rotate it so you can 
reach the drive cables.
  

Page 105

 Take ApartCD/DVD Drive, Power Mac G4 (QuickSilvers)  -   83
3. Carefully detach the 
ribbon cable tape from 
the top of the carrier.
4. Disconnect the following 
cables from the back of 
the CD/DVD/Zip drives:
¥ribbon cable from the 
CD/DVD and Zip drives
¥power cable (P6) from 
the CD/DVD drive
¥power cable (P7) from 
the Zip drive
5. Remove the carrier and 
drives from the 
computer. 

Page 106

 Take ApartCD/DVD Drive, Power Mac G4 (QuickSilvers)  -   84
6. Using a Phillips 
screwdriver, remove 
the four CD/DVD drive 
carrier mounting 
screws.
7. Slide the drive out of the 
carrier. 

Page 107

 Take ApartCD/DVD Drive, Power Mac G4 (QuickSilvers)  -   85
Replacement Note: When 
inserting the drive carrier 
into the computer, make 
sure the pegs on the bottom 
of the carrier fit into the 
two notches in the drive 
shelf. 

Page 108

 Take ApartZip Bezel/Blank Bezel, Power Mac G4 (QuickSilvers)  -   86
Zip Bezel/Blank Bezel, 
Power Mac G4 
(QuickSilvers)
Before you begin, open the 
side access panel. 

Page 109

 Take ApartZip Bezel/Blank Bezel, Power Mac G4 (QuickSilvers)  -   87
1. From inside the chassis, 
behind the front panel, 
push the bezel tab 
forward to release the 
right side of the bezel. 
2. Disconnect the hook on 
the left side of the bezel 
from the front panel and 
remove the bezel from 
the computer. 

Page 110

 Take ApartZip Drive, Power Mac G4 (QuickSilvers) - 88
Zip Drive, Power Mac 
G4 (QuickSilvers)
Before you begin, open the 
side access panel.
Note: You remove the drive 
carrier from the computer 
with the drives attached to 
the carrier. 
Start reading Apple power mac g4 quicksilver User Manual

Related Manuals for Apple power mac g4 quicksilver User Manual

All Apple manuals