ADDONICS TECHNOLOGIES 
ADS3GX4R5-MLM (Multilane 4X PCI-X Controller For Mac) 
 
 
 
Addonics ADS3GX4R5-MLM Macintosh Instructions  
The ADS3GX4R5-MLM has been tested on a PowerMac G5 Dual 2.0 
GHz model with PCI-X slots and on a PowerMac G4 with PCI slots. 
Mac OS X 10.4.x or later is required for the driver to work properly.  
 
Hardware Install:  
1. Turn the PowerMac G4 or G5 off and disconnect all cables.  
2. Make sure that you are grounded to avoid static electricity.  
3. Open the PowerMac G4 or...
                                            

                                                     
ADDONICS TECHNOLOGIES 
Model: ADSA2 
 
Installation Guide 
 
Angled View 
 
  
Side View 
  
Types of Bus Slots 
 
 
 
 
 
 
 
 
  
 
 
 
 
 
 
 
 
 
Note: The ADSA2 SATA 2-Port RAID Controller connects 
to a PCI Bus slot. 
 
 
 
 
 
 
ADSA2 Windows Driver Installation 
Note:  If you are only configuring independent drives using 
the host controller all you need to install is the 
driver. 
 
1. Connect the SATA host controller to an available PCI 
slot. 
2. Turn computer ON. When Windows boots up, the...
                                            

                                                    Technical Support
If you need any assistance to get your unit functioning properly, please have your 
product information ready and contact Addonics Technical Support at:
Hours: 8:30 am - 6:00 pm PST
Phone: 408-453-6212
Email: http://www.addonics.com/support/query/
Specifications
Chip Set:  Silicon Image Sil3132 Integrated Host Controller
Interface:  PCI-Express Bus Compatible
I/O Ports:  2 SATA Ports
Regulatory approvals:  FCC, CE
Features:
•  Supports Serial ATA Generation 2 transfer rate of 3.0 Gbps...
                                            

                                                    ADDONICS TECHNOLOGIES 
ADSA3GPX1-2EM (2-Port eSATA II  PCI-Express controller) 
 
 
 
SPECIFICATIONS 
 
Chip Set:  Silicon Image Sil3132 Integrated Host  
                   Controller 
Interface:  PCI Express Bus 
I/O Ports:  (2) Internal SATA Connectors 
Regulatory approvals:  FCC, CE 
 
Features: 
· Supports Serial ATA Generation 2 transfer rate of         
3.0 Gbps 
· Supports First-Party DMA Com mands for NCQ      
(Native Command Queuing) 
· Configure RAI D 0 & 1 and independe nt drives using 
Disk...
                                            

                                                    BIOS Jumper (J4)
Enable BIOS (1-2) – RAID firmware is active
Disable BIOS (2-3) – Base firmware is active
By default, the BIOS jumper is set to enable BIOS (1-2) for the ADSA3GPX8-4E. This means that when 
you boot into a system, after POST, the RAID BIOS of the controller card with the attach devices shows 
up. The RAID driver needs to be installed.
If the BIOS jumper is set to disable BIOS (2-3) when you boot into a s\
ystem, after POST, the RAID BIOS 
of the controller card does NOT show up. The BASE...
                                            

                                                     
 
 
 
 
Addonics 
T E C H N O L O G I E S 
 
 
 
 
Multilane 4X RAID5/JBOD PCI-E 8x Controller 
 
ADSA3GPX8-ML 
 
 
 
 
 
 
 
 
 
 
 
 
User’s Guide 
 
 
 
Overview 
  
 
To switch between RAID and non-RAID mode 
 
The controller card comes with jumper pins that would allow you to switch 
between RAID and non-RAID mode. The RAID mode means you can create 
RAID volumes using the SATARAID5 array manager. The non-RAID mode 
means you can only configure individual drives. 
 
The RAID mode uses the...
                                            

                                                    ADDONICS TECHNOLOGIES 
Model: ADSA3R5-E 
SPECIFICATIONS 
 
Chip Set:  Silicon Image Sil3124 Integrated Host  
                   Controller 
Interface:  PCI bus compatible 
I/O Ports:  3 SATA ports and 1 eSATA port 
Regulatory approvals:  FCC, CE 
 
Features: 
 Supports Serial ATA Generation 2 transfer rate 
of 3.0 Gbps (300 Mb/s) 
 Supports First-Party DMA Commands for NCQ 
(Native Command Queuing) 
 Supports RAID0, 1, 5, and 10 using Silicon 
Image SATARAID5 Array Manager 
 Supports individual...
                                            

                                                     
 
 
 
 
 
 
 
Addonics 
TEC H NO LO GIE S 
 
4-Port SATA II PCI 
RAID5/JBO D Controller Card 
(ADSA4R5) 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
User’s Guide 
Revision 1.0  
                                            

                                                    ADDONICS TECHNOLOGIES 
ADSAESA (eSATA/SATA PCI Host Controller Card) 
SPECIFICATIONS 
 
Chip Set:  Silicon Image Sil3512 int egrated host  
                   Controller 
Interface:  PCI bus compatible 
I/O Ports:  1 eSATA and 1 SATA Port 
Regulatory approvals:  FCC, CE 
 
Features: 
· 1 eSATA and 1 SATA ports 
· High data throughput, up to 150 Mbytes/sec (1.5 
Gbits/sec)  
· Work with any Serial ATA drive  
· Compatible with ATA33/66/100/133 hard drives 
and ATATPI dev ice using the optional Addonics...
                                            

                                                    ADDONICS TECHNOLOGIES 
ADST114R5 (4-Port SATA PCI RAID5/JBOD Controller Card) 
SPECIFICATIONS 
 
Chip Set:  Silicon Image Sil3114 Integrated Host  
                   Controller 
Interface:  PCI bus compatible 
I/O Ports:  (4) SATA Connectors 
Regulatory approvals:  FCC, CE 
 
Features: 
· Four high speed Serial ATA interface ports, 
each supporting 1st generation Serial ATA data 
rates (1.5Gb/s). 
· Fully compliant with Serial ATA 1.0 
specifications. 
· Compliant with 32-bit, 33/66MHz PCI 2.2 host...