ADDENDUM
LEVER SPRING REPLACEMENT KIT
WI1368 11/04
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2004
HOW TO REPLACE THE LEVER SPRING (PART HW1220)
2. Remove the Lever Handle
Spring (HW571) and set aside.
A new spring will be substituted
during reassembly (step 7). 1. With outside housing removed
from door, unscrew two screws
and remove the Spring...
ADDENDUM
LEVER SPRING REPLACEMENT KIT
WI1368B 2/06
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2006
HOW TO REPLACE THE LEVER SPRING (PART HW1220)
2. Remove the broken Lever Han-
dle Spring (HW1220). 1. With outside housing removed
from door, unscrew two screws
and remove the Spring Cover Plate
(HW565) as shown. 3. Remove Connector Plate (HW570)....
1
PP100 Series
Battery Eliminator
INSTALLATION INSTRUCTIONS
WI1576 9/06
DESCRIPTION
The PP100 is a battery eliminator that can be used with a
variety of Alarm Lock door alarms or any other device that
requires an unregulated power supply of between 6 and 9
volts. The PP100 is designed to replace all power normally
supplied by the devices internal batteries, thus allowing
these internal batteries to be used exclusively for battery
backup if AC is lost. The PP100 can be used with...
ADDENDUM
NEW KEY LOGGING FEATURE
WI1587 1/07
The new Key Logging feature creates an entry in the Audit Log when a conventional key is used for entry. Two sample log
entries are shown below, one printed, the other as displayed in DL-Windows. To enable Key Logging, simply connect the
wires as shown in the images at the bottom.
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ...
1
345 Bayview Avenue
Amityville, New York 11701
CALL TOLL FREE: 800-ALA-LOCK
(800) 252-5625
ELECTRONIC EXIT DOOR ALARMS
PADDLE ARM MODEL 265/265L
PUSH BAR MODEL 715
INSTALLATION AND OPERATION INSTRUCTIONS
GENERAL DESCRIPTION
Models 265, 265L (long arm) and 715 are non-handed,
delayed egress, electronic exit door locking systems. Arming
is accomplished by actuating the deadbolt using a 1
1/8” rim
cylinder (not included). When armed, depressing the paddle
(Model 265) or push bar (Model 715)...
IMPORTANT
Templates must be printed without size modifications
and verified for dimensional accuracy.
•Before printing, select the printing options necessary
to ensure that copies are produced without size
adjustments.
•After printing, measure the dimensions indicated on
the template to ensure correct scale.
The 788 monitoring function consists of a reed switch in our 730 keeper and an activating magnet in the locks
deadbolt. The 730 keeper has a pair of flying leads that provide normally closed dry contacts when the door
is closed and the deadbolt is locked.
INSTALLATION
Follow the normal instructions for mounting the keeper with the following exception: Drill a 1/4 hole into the
hollow metal door frame for the keepers flying leads to run through.
WIRING
When using Alarm Locks remote...
IMPORTANT
Templates must be printed without size modifications
and verified for dimensional accuracy.
•Before printing, select the printing options necessary
to ensure that copies are produced without size
adjustments.
•After printing, measure the dimensions indicated on
the template to ensure correct scale.
IMPORTANT
Templates must be printed without size modifications
and verified for dimensional accuracy.
•Before printing, select the printing options necessary
to ensure that copies are produced without size
adjustments.
•After printing, measure the dimensions indicated on
the template to ensure correct scale.
ADDENDUM
REPOSITION THE
PRECISION 1100 RECEPTACLE
WI1580 10/06
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2006
HOW TO REPOSITION THE RECEPTACLE
For the Precision 1100 model to work correctly with the NAPCO Exit Trim models, the 1100 model receptacle must be
located at the bottom of the unit. If the 1100 model receptacle is located at the top position (either...
1
WI1120E 5/07
Trilogy
PDK3000 Series
Programming Instructions
PDK Trilogy Series
Standalone Access Control Systems
with ProxCard Access
PDK3000
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC © ALARM LOCK 2007
HID HID CORPORATION
PROXCARD® PROXKEY®
KEYFOB
DL-WINDOWS PROGRAMMING
SOFTWARE
AL-DTM
DATA TRANSFER
MODULE AL-PRE PROXCARD®
READER / ENROLLER...
1
PDL1300
Programming Instructions
HID HID CORPORATION
PROXCARD® PROXKEY®
KEYFOB
PDL Trilogy Series
Stand-Alone Access Control Systems
with ProxCard
® Access
OI312 7/06
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2006
AL-DTM
DATA TRANSFER
MODULE
AL-PRE PROXCARD®
READER / ENROLLER
DL-WINDOWS PROGRAMMING
SOFTWARE
Publicly traded on NASDAQ...
