1
PG21 Series
Pilfergard Door Alarms
INSTALLATION INSTRUCTIONS
WI738F 1/06
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, (800) 645-9445
For Technical Service, (800) 645-9440
© ALARM LOCK 2006
AL ARM LOCK
DESCRIPTION
The PG21 is a microprocessor-controlled door alarm for sur-
face mounting on a door or door frame. Typical applications
include emergency fire escape doors, nursing home stairwell
doors, rear restaurant and theater doors. The PG21 is de-
signed to...
IMPORTANT
Templates must be printed without size modifications
and verified for dimensional accuracy.
•Before printing, select the printing options necessary
to ensure that copies are produced without size
adjustments.
•After printing, measure the dimensions indicated on
the template to ensure correct scale.
CYLINDER ADAPTER KIT
ADDENDUM
WI 1177 1/03
CAUTION
PROPER ALIGNMENT OF GEARS IS CRITICAL!
FAILURE TO ALIGN GEARS PROPERLY WILL CAUSE LOCK TO MALFUNCTION.
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
© ALARM LOCK 2003
Note: See the illustrated instructions, WI 1163,
How to Replace Cylinder for detailed replace-
ment procedures. After inserting the new cylin-
der and Slide Plate, and before replacing the
Cover...
1
To run DL-Windows in XP Compatibility Mode, proceed as follows:
1. Locate the DL-Windows working directory--usually C:\DL-Windows.
2. Right-click DLWIN32.exe and click Properties. Note: Windows may display the file name as DLWIN32, as shown
in the following image:
3. In the Compatibility tab, check Run this program in compatibility mode for and select Windows XP (Service
Pack 2) from the pull-down list. Click OK to save your...
1
Turn off User Access Control (UAC) in Windows® Vista as follows:
Important: If DL-Windows is installed, uninstall DL-Windows first, then reinstall after UAC is turned off.
1. Open the Windows
® Control Panel.
2. Open User Accounts.
3. Click Turn User Account Control on or off.
WI1787 9/08
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service...
Introduction
The AL-IR1 is optically linked to the T3/T3E Series Locks via
infrared light. It is used for reading the various reports main-
tained by the locks, including the Audit Log.
Specifications
•Dimensions: 3½ W x 7L
•Interface: Infrared Light Beam
•Activation: Refer to Lock Instructions
•Distance: 1 to 4 above the infrared LED
•Controls: 3 (Power On/Off, printer Contrast and Paper Feed)
•Paper: Uses common 2¼ thermal paper available at most
office supply stores (supplied)...
16. Make sure the Battery Connec-
tor Wire is routed through the
correct hole to meet up with the
center oval hole drilled in step 10.
INSIDE BATTERY KIT
INSTALLATION INSTRUCTIONS
WI1516 2/06
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
© ALARM LOCK 2006 Publicly traded on NASDAQ Symbol: NSSC www.alarmlock.com
7. Secure the Bat-
tery Mounting
Bracket using the
top door mount-
ing screw that is
located...
1
A-100
INDOOR STAINLESS STEEL KEYPAD
WIRING & PROGRAMMING INSTRUCTIONS
WI1495 7/06
GENERAL DESCRIPTION
The A-100 is a self-contained access control keypad de-
signed for indoor basic access applications. Its heavy
stainless steel faceplate is designed to mount on a standard
single-gang electrical box. The A-100 operates up to three
outputs (two relays and 1 open-collector transistor) and can
be used to trigger a door strike, an electromagnetic door
lock, or any other relay-activated...
1
A-100IMWP
ILLUMINATED MULLION KEYPAD
WIRING & PROGRAMMING INSTRUCTIONS
WI1497 7/06
GENERAL DESCRIPTION
The A-100IMWP is a self-contained access control keypad
designed outdoor applications. Its heavy stainless steel mul-
lion-style surface mount enclosure is designed to be used in
narrow stile applications. The A-100IMWP operates up to
three outputs (two relays and 1 open-collector transistor)
and can be used to trigger a door strike, an electromagnetic
door lock, or any other...
1
A-100WP
SEALED ENVIRONMENT KEYPAD
WIRING & PROGRAMMING INSTRUCTIONS
WI1496 12/06
GENERAL DESCRIPTION
The A-100WP is a self-contained access control keypad de-
signed for the harshest outdoor environments. Its heavy
stainless steel enclosure and metal keypad buttons also
make it extremely vandal resistant. The A-100WP operates
up to three outputs (two relays and 1 open-collector transis-
tor) and can be used to trigger a door strike, an electromag-
netic door lock, or any other...
IMPORTANT
Templates must be printed without size modifications
and verified for dimensional accuracy.
•Before printing, select the printing options necessary
to ensure that copies are produced without size
adjustments.
•After printing, measure the dimensions indicated on
the template to ensure correct scale.
ADDENDUM
LEVER CONNECTOR REPLACEMENT KIT
WI1454 8/05
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2005
HOW TO REPLACE THE LEVER CONNECTOR (NEW PART HW572E)
2. Remove the Lever Handle
Spring (HW1220) and set aside. 1. With housing removed from door,
unscrew two screws and remove
the Spring Cover Plate (HW565) as
shown. 3. Remove Connector Plate...
LEVER RETURN SPRING REPLACEMENT KIT
WI1498 3/06 © ALARM LOCK 2006 Publicly traded on NASDAQ Symbol: NSSC www.alarmlock.com
2. Remove the Spindle Bushing
Assembly and set aside. Remove
Locking Piece (and the small spring
attached to it). 1. With outside housing removed
from door, unscrew eight screws
and remove the Rear Cover
Plate as shown. 3. Remove Slide Plate. Remove Slide
Plate Springs. 4. Remove the 3 screws that hold
down the Plastic Cover Plate.
Spindle...
