INSTALLATION
AND
MAINTENANCE
INFORMATION
FOR THE
COMDIAL
Executech MODEL
1432B KSU
ExecuTech 2000
User’s Guide
Autodials
1. PresslTCM+~l.
2. Press a programmable button (memory
location).
3. Select line button, line group (1 - 4) or ITCM.
4. Dial number or feature code to be stored (up to
16 digits).
.
NOTE:
l Digits O-9, *, # can be stored.
l Hookflash can be stored by press-
ing TAP.
l Pause can be stored by pressing
HOLD.
5.~ Press TRANSCONF and repeat steps 2-4 to
program another autodial button.
-or-
5b. Press SPKR to quit.
6. Log secondary stored numbers in directory.
Station Speed Dial...
xecu
Model 2000 Teleph
System
This publication is applicable to
the following common equipment:
Model E34PT Rev. A and later
Model
EKPT Rev. A and later
Model
ESOPT Rev. A and later
To turn on message,
l Lift handset.
l DialsO2.
l Dial message code number (0 - 9).
To turn off message,
l Lift handset.
l Dial#02. MEET-ME PAGE
To answer all call or zone paging from any station,
l Lift handset.
l Dial 88. Meet paging party on line.
ff the local telephone service is pulse (rotary), con-
vert to tone while dialing as follows:
STATION-TO-STATION MESSAGING
l Press #at point in dialing sequence where conversion to
Station must have BLF appearance at another station. tone is...
MODEL 2232 HYBRID/KEY SYSTEMCoinmhted ?o U.S. design lea&M&% busirless commhnieations--
Change pages 3188
I Ml-66-047
SEPTEMBER, 1987
COMDIAL.
ExecuTech
el2264X and 2296X Hybrid Systems
l Installation
l Programming
l Maintenance
I1
This publication is applicable to the following common equipment :
- Model K2264 Mfg. Code 8xxH or later
- Model K2296 Mfg. Code 8xxH or later
lM166-060.01
1268Change pages 3-14,3-38,3-39 i%g
0 Select specific line, line group, or no selection
as required.
0 Press specific telephone line key for line.
-or-
o Press 1 - 4 on the telephone dial pad for line
group.
-or-
= Press 0 on the telephone dial pad for no
selection. (When 0 is stored and automatic
dialing is used, system will pick line as-
signed to telephone or last line used.)
l Dial the number sequence to be stored from
the telephone dial pad. (up to 16 digits).
l To store a pause, press HOLD on
telephone.
l To store a...
l Press specific telephone lineckey for line.
-or-
e Press
1 m 4 on the telephone dial pad for line
group.
-or-
e Press 0 on the telephone dial pad for no
selection. (When 0 is stored and automatic
dialing is used, system will pick line as-
signed to telephone or last line used.)
. Dial the number sequence to be stored from
the telephone dial pad (up to 16 digits).
l To store a pause, press HOLD on
telephone.
. To store a flash, press
RECALL on
telephone.
To store another number for...
COMDIAL
Executech
Hybrid/Key System
Attendant’s Guide
For use with the following hybrid/key system models:
e 1432 series
l 22xx series
COMDIAL
Executech II
• Installation
• Maintenance
• Programming
Autodials
1. Press ITCY.
2. Press TRANSEONF.
3. Press programmable button (memory loca-
tion).
4. Select line button, or line group
(1 - 4) or ITCM.
5. Dial number or feature code to
be stored (up to 16 digits).
NOTE: 0 Digits O-9, +K, # can be stored.
l Hookflash can be stored by
pressing TAP.
l Pause can be stored by
pressing HOLD.
6. Press TRANSlCONF and repeat steps 3-5 to
program another programmable button or
press h4NTR (SPKR) to quit.
7. Log stored numbers on telephone index...
Executech LCD
Speakerphone
This user guide is applicable for the following system
models:
l 14328 Rev F and later
l K2232C Rev C and later
l K2264 Rev C and later
l K2296 Rev C and later
User’s Guide ;
GCA 70-135.02
2190
COMDIAL
Executech LCD
Speakerphone
GCA 70-088.02
June, 1988
