3D Perception CompactView Sx25+e User Manual

   
 
      
 
 
   
 2005 3D perception AS All rights reserved.  
The copyright of this document is the property of 3 D perception AS. The document is supplied on the 
express terms that it is to be treated as confident ial. No part of this document may be reproduced or 
transmitted in any form or by any means, electronic  or mechanical for any purpose, without the 
express written permission of 3D perception AS. The  information in this document is subject to 
change without notice and is provided ‘AS...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  ii 
 
 
 
DOCUMENT STATUS 
 
Revision  Month Year  Paragraph(s)  Prepared by  Description of 
Change 
1  October 2004  All  A F Rotheram  Initial release 
2  November 2004  16  A F Rotheram  Reset 
3  September 2005  22 & 24  A F Rotheram  Parts list 
USA address 
         
         
         
   

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  iii 
 
 
 
T
ABLE OF CONTENTS 
 
1.  B
EFORE YOU START................................................... .............................................................. 1 
1.1  Accessories .................................... ............................................................................... 1 
1.2  Cables ............................................

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  iv 
 
 
12.2  Connecting the CompactView SX25+E .............
........................................................ 17 
13.  F
OCUS AND ZOOM................................................... .............................................................. 18 
13.1  Focus......................................... .................................................................................. 18 
13.2...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  v 
 
 
22.  PARTS LIST...................................................
......................................................................... 37 
22.1  Main products ................................. ............................................................................ 37 
22.2  Spare parts ......................................

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  1 
 
 
1.  BEFORE YOU START 
Thank you for choosing a 3D perception 
COMPACTVIEW SX25+ projector 
 
1.1  Accessories 
Please take a few minutes to ensure that your  COMPACTVIEW SX25+ projector pack contains all 
the necessary parts as listed on the Accessories Pa ge. 
 
1.2  Cables  
Please take a few minutes to make sure that your COMPACTVIEW SX25+ projector pack contains 
all the necessary cables, as listed on...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  2 
 
 
2.  ACCESSORIES 
      
COMPACTVIEW SX25+ PROJECTOR  REMOTE CONTROL AND BATTERIES 
  M
ODELS:   SX25+I   
  SX25+E   
 
 
CABLE COVER 
 
AIRFLOW COVER    
  User Manual 
 
Cables 
VGA male Blue - VGA male Blue, 2m 
DVI-I male White - DVI–I male White, 2m  
A/V Cable 3 x Phono – Phono + 3,3mm stereo jack, 2m  
S-Video Mini DIN 4 pin male - Mini DIN 4 pin male,  2m 
Sound Cable 3,5mm stereo jack - 3,5mm...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  3 
 
 
3.  INTRODUCTION 
The 
COMPACTVIEW SX25+  projector is the ultimate in high-resolution projec tors when projection 
on to flat, curved or double curved screens with mu ltiple projectors is the requirement. 
  
The  C
OMPACTVIEW SX25+  projector is compatible with most data and video so
urces, both 
analogue and digital, and provides the user with ou tstanding features such as: 
 
· 1400x1050 pixel SX25GA...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  4 
 
 
4.  SAFETY & WARNINGS 
This user manual contains important information reg
arding safety precautions and the set-up 
and use of the projector. Please read the manual ca refully before you operate the projector.
 
 
4.1  Safety 
This device complies with relevant safety regulations for data processing equipment for use in 
an office environment. Before using the projector f or the first time, please read...

3D perception             COMPACTVIEW SX25+ 
Revision 3                    User Manual   
 
  5 
 
 
The projector is designed for indoor use only. Neve
r operate the unit outdoors. 
  
Do not operate the projector outside its temperatur e and humidity specifications, as this may 
result in overheating and malfunctioning.   
Only connect the projector to signal sources and vo ltages as described in the technical 
specification chapter. Connecting to unspecified si gnal sources or voltages may lead to...