3D Perception CompactView Sx25+e User Manual
Have a look at the manual 3D Perception CompactView Sx25+e User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 21 3D Perception manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3D perception COMPACTVIEW SX25+
Revision 3 User Manual
36
21. COVERS
21.1 Cable cover
Loosen the rear adjustable feet by unscrewing them.
Align the vertical hooks on the cover with the guid es on the rear of the projector.
Snap the cover into place with the lower guides cla mping the rear feet.
Tighten the rear feet to fix the cable cover (A) in place.
Tip: Connect all cables and fix them in place before th
e cable cover (A) is attached to the
projector.
21.2 Airflow cover
Affix Airflow cover (B).
3D perception COMPACTVIEW SX25+
Revision 3 User Manual
37
22. PARTS LIST
22.1 Main products
Product name Product number
CompactView SX25+E
313-SX25-E
CompactView SX25+I 313-SX25-I
22.2 Spare parts
Product name Product number
Lamp Replacement Kit 250 W 313-400-0184-00
3D perception COMPACTVIEW SX25+ Revision 3 User Manual 38 23. LIMITED WARRANTY, ‘FCC STATEMENT’ AND ‘TRADEMARKS COPYRIGHT’ Limited Warranty Except as otherwise stated herein, 3D perception wa rrants that a C OMPACTVIEW SX25+ projector is free from defects in parts and labour under normal use during the warranty period. The warranty period means the 12-month period from the date of purchase of a C OMPACTVIEW SX25+ projector. During the warranty period, 3D perception will, at its option and in its sole discretion, repair or replace defective parts, including replacement of t he entire C OMPACTVIEW SX25+ projector, at no additional charge to the Customer. However, the Customer is responsible for all shipping and insurance costs incurred in returning any C OMPACTVIEW SX25+ projector to the Customer which does not require any repair or replacement wo rk, as determined by 3D perception in its sole discretion. This limited warranty does not exte nd to any 3D perception product that has been damaged as a result of accident, misuse, or ab use. Nor does it extend to the use of parts not manufactured or sold by 3D perception, by unaut horised modification of a C OMPACTVIEW SX25+ projector, or as a result of servicing by unauthor ised personnel. This limited warranty extends only to the Customer, and is not transferab le or applicable to any other third party or user, including any one who purchases a used C OMPACTVIEW SX25+ projector. Any person asserting a claim under this limited warranty must establish to 3D perception’ satisfaction the date of purchase and that a C OMPACTVIEW SX25+ projector was purchased new. Other warranty and liability limitations Aside from this standard published warranty, 3D per ception makes no warranty of any kind, express or implied, including without limitation, t hose of merchantability and of fitness for a particular purpose. Without limiting the generality of the foregoing, any description of a C OMPACTVIEW SX25+ projector is for the sole purpose of identifying i t, is not part of the basis of any bargain, and does not constitute a warranty tha t the item sold shall conform to that description. The use of any sample or model is for illustrative purposes only, it is not part of the basis of any bargain, and it is not to be construed as a warranty that a C OMPACTVIEW SX25+ projector will conform to the sample or model. No affirmation of fact or promise made by 3D percep tion shall constitute a warranty that a C OMPACTVIEW SX25+ projector will conform to the affirmation or promi se. 3D perception makes no warranty that the goods are free from claims of infringement of patents, trademarks, or copyrights. This limited warranty shall be the exclu sive remedy. 3D perception shall not be liable to customers or others for incidental, consequentia l, or special damages, or lost profits. Under no circumstance shall 3D perception liability or cu stomer’s remedy for damages against 3D perception exceed its cost for a C OMPACTVIEW SX25+ projector.
3D perception COMPACTVIEW SX25+ Revision 3 User Manual 39 Procedure for claims Any and all questions or claims concerning a C OMPACTVIEW SX25+ projector shall be made to 3D perception authorised personnel through the VAR from whom the C OMPACTVIEW SX25+ projector was purchased. In no case shall a C OMPACTVIEW SX25+ projector be returned without first securing the authority of 3D perception or it s authorised personnel. Any damages to, defects in, loss of, non conformities in, or any ot her claim concerning a C OMPACTVIEW SX25+ projector which could be discovered by inspection u pon delivery must be reported to the delivering carrier, and in writing to 3D perception at: the following address, promptly and in no event later than thirty (30) days after delivery. 3D perception AS Solbråveien 41 P.O. Box 455 N-1373 Asker Norway In the case of any such claim, inspection shall be promptly arranged with 3D perception or it’s authorised personnel, and where appropriate, repres entatives of the carrier. Any other claim or action respecting the condition or conformity of a C OMPACTVIEW SX25+ projector or any other matter affecting a C OMPACTVIEW SX25+ projector must be submitted in writing to 3D perce ption promptly upon discovery and in no event later than expiration of the Warranty Period. Any part of a C OMPACTVIEW SX25+ projector which is subject of any claim shall be s et aside and protected, without further processing or use, until 3D perception or its authorised personnel have an opportunity to inspect it and advice the Cu stomer of the disposition, if any to be made thereof. Failure to give timely written notice of a ny claim shall bar any remedy. Technical advice 3D perception, or its authorised personnel, may fur nish technical advice with reference to the use of a C OMPACTVIEW SX25+ projector, but there is no obligation to furnish s uch advice. If any advice or assistance is furnished, it shall be give n and accepted at Customer’s risk, 3D perception shall not be responsible or liable for t he advice or assistance given or the results thereof. FCC Statement A C OMPACTVIEW SX25+ projector has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of th e FCC rules. These limits are designed to provide reasonable protection against harmful inter ference when it is operated in a commercial environment. A C OMPACTVIEW SX25+ projector generates, uses and can radiate radio frequency energy and, if not used in accordance wit h the instruction manual, may cause harmful interference to radio communications. Operation of a C OMPACTVIEW SX25+ projector in a residential area is likely to cause harmful interfe rence in which case the user will be required to correct the interference at own expense.
3D perception COMPACTVIEW SX25+ Revision 3 User Manual 40 24. CONTACT US Head office 3D perception AS Solbråveien 41 P. O. Box 455 N1373 Asker Norway Tel: +47 66 98 70 70 Fax: +47 66 98 70 71 Support desk: +47 66 98 70 90 [email protected] [email protected] www.3d-perception.com Regional offices USA 3D perception Inc 1277 N. Semoran Blvd. Suite 117 Orlando, Florida 32807 USA Tel: +1 321 235 7999 Fax: +1 321 235 7992 [email protected] Japan 3D perception AS Mitsui Residence 102 4-2-2 Ropponngi, Minato-ku, Tokyo 109-0032 Japan Tel: +81 3 3401 6771 Fax: +81 3 3401 6772 [email protected] NOTE: Local support may be available in other countries. Please contact the head office for further details.